Effects of ripple cross angles and turbulence models on wet curtain resistance

Tao Ding, Lumeng Fang, Zhengxiang Shi, Baoming Li, Yang ZhaoInternational Journal of Agricultural and Biological Engineering 2019 · DOI

Abstract

To study the influence of ripple cross angles on the resistance of wet curtains, wet curtains with different ripple cross angles (45°/45°, 45°/15°) were tested on agricultural ventilation equipment performance testing benches, and the static pressure drop under different wind speeds (1-3 m/s) was determined. Four turbulence models (κ-e, RNG κ-e, κ-ω, SST κ-ω) were adopted for numerical simulations of the two types of wet curtain, and the simulations’ results were compared with those of experiments. The average errors found are 41.1%, 48.7%, 27.1%, and 27.8%, respectively, and the κ-ω model is found to be the most suitable one for the calculation of wet curtain resistance among the four turbulence models. By using the κ-ω turbulence model, the static pressure drop performances of wet curtains with ripple cross angles 45°/35° and 45°/25° were calculated. Resistance increases with wind speed and ripple cross angles, and a large ripple cross angle has a higher resistance growth rate with increasing wind speed. Keywords: wet curtain, ripple cross angle, resistance, turbulence model, ventilation, cooling and humidifying system DOI: 10.25165/j.ijabe.20191204.3446 Citation: Ding T, Fang L M, Shi Z X, Li B M, ZhaoY. Effects of ripple cross angles and turbulence models on wet curtain resistance. Int J Agric & Biol Eng, 2019; 12(4): 43–46.
BibTeX
@article{ding2019effects,
  author = {Tao Ding and Lumeng Fang and Zhengxiang Shi and Baoming Li and Yang Zhao},
  title = {{Effects of ripple cross angles and turbulence models on wet curtain resistance}},
  journal = {International Journal of Agricultural and Biological Engineering},
  year = {2019},
  doi = {10.25165/ijabe.v12i4.3446},
}

Loading related content...

Figure