Effects of Locomotion and Viewpoint Control on Immersive Robot Telepresence for Navigation and Inspection

Ammaar Zaman, Neven ElSayed, Oliver Prentner, Mohamed Ellethy, Mostafa M. Lotfy, Maram Selsabila Mahmoudi, Eduardo VeasarXiv 2026 · arXiv

In the world of robot teleoperation, "driving" and "looking" are often competing tasks. This paper explores how to reduce that cognitive load by letting operators use their bodies—specifically their heads and legs—to control a quadruped robot through a VR headset. The researchers found that while walking on a treadmill feels great, head-guided camera control is the real MVP, significantly improving both navigation speed and safety.

TL;DR

This study compares joystick versus body-coupled control (treadmills and head-tracking) for teleoperating a quadruped robot. The results show that head-guided camera control is the primary driver of performance, leading to faster completion times and fewer collisions, while omnidirectional treadmill locomotion primarily enhances the subjective "feel" and immersion of the experience.

What Problem Does This Paper Address?

Teleoperating a robot in a complex environment is a "dual-task" nightmare. An operator must navigate (steering the robot) while simultaneously inspecting the environment (looking for targets or hazards). In traditional setups using handheld joysticks, these two tasks compete for the same manual resources and the operator's attention.

The authors investigate whether body-coupled interaction—mapping an operator's physical walking to robot movement and head orientation to camera movement—can reduce this "coordination cost." They specifically look at how these control schemes affect performance in a combined navigation and inspection task using a non-humanoid robot (a quadruped).

Methods

The researchers conducted a within-subject $2 \times 2$ study with 17 participants. Each participant used a VR headset to control a Unitree AlienGo quadruped robot through a physical foam-wall maze.

The study crossed two factors:

  1. Locomotion: Joystick vs. an Omnifinity Omnideck (an active omnidirectional treadmill).
  2. Viewpoint Control: Joystick vs. Head-guided tracking for a pan-tilt camera mounted on the robot.
Fig. 2. Overview of the robot platform and telepresence interface.

The robot was equipped with two stereo cameras: a fixed "Robot Body Camera" (RBC) for ground clearance and a "Pan-Tilt Camera" (PTC) for inspection. Participants had to navigate the maze as quickly as possible, avoid wall collisions, and "capture" (screenshot) specific circular symbols on the walls while ignoring triangular distractors.

Key Insights and Ideas

  • Viewpoint Control Trumps Locomotion: The method used to control the camera had a much larger impact on objective performance (speed, safety) than the method used to move the robot.
  • Reduced "View Negotiation": Traditional joystick control forces users to constantly toggle between "driving mode" and "looking mode." Head-tracking eliminates this friction, allowing for a more stable and continuous viewing strategy.
  • The "Experiential Compromise": Walking on a treadmill (the "OH" condition) provided the highest levels of presence and "flow," even though it wasn't the fastest way to finish the maze. It felt the most natural, despite the physical effort involved.
  • Partial Body Coupling Works: Even though the robot was a four-legged dog and the user was a two-legged human, mapping head rotation to the robot's camera was intuitive enough to provide immediate performance gains without extensive training.

Key Results

The study analyzed four conditions: JJ (Joystick/Joystick), JH (Joystick/Head), OJ (Omnideck/Joystick), and OH (Omnideck/Head).

  • Speed: The JH condition was the fastest (mean $178.5s$), while the OJ condition was the slowest (mean $282.4s$).
  • Safety: Head-guided control significantly reduced wall collisions. JH had the lowest collision count ($2.79$ per trial) compared to JJ ($6.05$).
  • Workload & Usability: Head-guided conditions (JH and OH) showed significantly lower NASA-TLX workload scores and higher System Usability Scale (SUS) scores (approx. $77/100$ for head-guided vs. $59/100$ for JJ).
  • Camera Behavior: Participants using head-tracking switched between the two camera views $4\times$ less frequently than those using joysticks, indicating they were more comfortable sticking with the steerable view.
Performance metrics showing completion time and wall-contact count across conditions.

Limitations and Future Work

The authors acknowledge several constraints:

  • Sample Size: With only 17 participants, the study may have missed subtler effects of locomotion.
  • Morphology Mismatch: The mapping was "partial." A human walking on a treadmill doesn't perfectly map to a quadruped's gait, which might explain why the treadmill didn't provide a performance boost over the joystick.
  • Latency: While the system logged round-trip times (see table below), "glass-to-glass" latency (the total delay from robot camera to user eye) was not measured, which is a critical factor in VR-based teleoperation.
  • Environment: The study used a controlled lab maze with foam walls. Real-world applications (search and rescue, industrial inspection) would involve much more varied terrain and higher stakes for collisions.
Latency characterization of the system.

Future research could explore shared autonomy (where the robot helps avoid walls) or applying these body-coupled interfaces to different robot forms, such as aerial drones or humanoid rescuers.

Summary updated

Abstract

In many robot telepresence interfaces, movement and viewing are managed through handheld inputs. This can divide attention between steering, looking, and inspection. We compared joystick versus omnidirectional treadmill locomotion and joystick-based versus head-guided camera control in a within-subject 2x2 study in which 17 participants used a virtual reality headset to guide a quadruped robot through a physical maze while locating marked wall symbols and capturing them as visual evidence. Mixed-effects analyses showed that head-guided camera control was associated with faster completion, lower wall-contact cost, lower workload, and more favorable presence, usability, technology acceptance, and flow than joystick-based camera control. The strongest overall objective performance was observed in the joystick locomotion plus head-guided camera condition, whereas the omnidirectional treadmill plus head-guided camera condition emerged as the strongest experiential compromise. Exploratory camera analyses showed that head-guided camera control reduced switching, increased reliance on the pan-tilt view, and supported a more stable viewing strategy across the maze. These strategy differences were consistent with the performance advantage, especially for wall-contact duration. Targets captured remained near ceiling and simulator sickness remained low across all conditions. Overall, the results indicate that viewpoint control was the stronger differentiator in this combined navigation and inspection task, while locomotion still shaped the objective and experiential tradeoff.
BibTeX
@misc{zaman2026effects,
  author = {Ammaar Zaman and Neven ElSayed and Oliver Prentner and Mohamed Ellethy and Mostafa M. Lotfy and Maram Selsabila Mahmoudi and Eduardo Veas},
  title = {{Effects of Locomotion and Viewpoint Control on Immersive Robot Telepresence for Navigation and Inspection}},
  year = {2026},
  eprint = {2611.23939},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2611.23939},
}
Figure