Effects of carbon dots and their composites on the burning performance of HMX-CMDB propellant

Zhen Zhang, Y.s. Zhang, Yifan Jiang, Weiqiang Pang, Hongxu Gao, Zhifeng Yuan, Libai Xiao, Qingshan Fu, Qibing Pei, Shiyao Niu, Yu Can Fu, Fengqi ZhaoDefence 2025 · DOI

Abstract

Designing efficient, stable dual-functional combustion catalysts remains a key challenge in developing next-generation solid propellants, particularly in achieving wide pressure plateau combustion. Herein, we synthesize a series of carbon dot-based catalysts (CDs-1, CDs-2, CDs/Cu) via oxidative etching and hydrothermal methods, and employ them to replace conventional carbon black (CB) at 0.65 wt% loading in the preparation of HMX-CMDB propellants. Systematic evaluation through combined thermochemical analysis (50–350 °C), laser ignition diagnostics (50–350 W/cm 2 ), and combustion chamber testing (4–18 MPa) reveals remarkable catalytic enhancements. The optimized CDs/Cu catalyst demonstrates multifunctional superiority: (1) 7.4 °C reduction in HMX-CMDB decomposition temperature at 10 °C/min (from 205.2 °C to 196.0 °C); (2) 66.7% decrease in laser ignition delay (from 45 ms to 15 ms); (3) 190.9% burning rate increase at 4 MPa (from 4.61 mm/s to 13.41 mm/s); (4) lower pressure exponent of 0.02 within 4–18 MPa range. Notably, CDs-1 induces stable “Plateau” combustion (4–14 MPa), while CDs/Cu achieves “Mesa” effects (8–12 MPa) via synergistic thermal feedback mechanisms-both phenomena ensure stable operation of the engine. Mechanistic studies integrate thermochemical kinetics, ignition combustion process, combustion flame structure and combustion wave temperature distribution trends, which establish a new paradigm for the study of high efficiency combustion catalysts for solid propellants. Three kinds of novel carbon dots-based nanomaterials(CDs-1, CDs-2 and CDs/Cu)were prepared and characterized, and their application in HMX-CMDB propellant after replacing carbon black was studied and discussed. • Three new combustion catalysts (CDs-1, CDs-2 and CDs/Cu) were obtained and applied in HMX-CMDB propellants. • Compared with traditional carbon black, the effects of three catalysts on the thermal decomposition, laser ignition and burning rate of HMX-CMDB propellant were studied. • The thermal synergy mechanism of CDs/Cu can effectively increase the burning rate and reduce the pressure exponent. • The catalytic mechanisms of CDs and CDs/Cu were analyzed.
BibTeX
@inproceedings{zhang2025effects,
  author = {Zhen Zhang and Y.S. Zhang and Yifan Jiang and Weiqiang Pang and Hongxu Gao and Zhifeng Yuan and Libai Xiao and Qingshan Fu and Qibing Pei and Shiyao Niu and Yu Can Fu and Fengqi Zhao},
  title = {{Effects of carbon dots and their composites on the burning performance of HMX-CMDB propellant}},
  booktitle = {Defence},
  year = {2025},
  doi = {10.1016/j.dt.2025.10.011},
}

Loading related content...

Figure