Effective Electrochemiluminescence Aptasensor for Detection of Atrazine Residue

Xue Huang, He Li, Mengjiao Hu, Mengyuan Bai, Yemin Guo, Xia SunSensors 2022 · OpenReview

TL;DR

This paper presents a novel and highly sensitive electrochemiluminescence (ECL) aptasensor for the rapid detection of atrazine (ATZ), a widely used herbicide. By leveraging silver nanoparticles (AgNPs) to enhance the ECL signal and an ATZ-specific aptamer for recognition, the sensor achieves a broad linear range and a low limit of detection, making it suitable for real-world sample analysis.

What Problem Does This Paper Address?

Atrazine (ATZ) is a prevalent herbicide used globally for weed control. Despite its efficacy, ATZ's persistence in the environment and its potential adverse health effects (including endocrine disruption and carcinogenicity) necessitate precise and rapid detection methods. Traditional analytical techniques like gas chromatography (GC) and liquid chromatography (LC) are accurate but often require complex sample preparation, expensive equipment, and are not suitable for rapid, on-site monitoring. This creates a need for more accessible, sensitive, and field-deployable sensors for ATZ residue detection in various matrices like water, soil, and food.

Methods

The researchers developed an electrochemiluminescence (ECL) aptasensor. The core of the method relies on the luminol-hydrogen peroxide (H₂O₂) chemiluminescent system, whose light emission is amplified by silver nanoparticles (AgNPs). AgNPs act as a catalyst, promoting H₂O₂ decomposition and enhancing the ECL intensity.

The fabrication process involved modifying a glassy carbon electrode (GCE) in several steps:

  1. Luminol coating: The GCE was coated with luminol.
  2. AgNP deposition: Silver nanoparticles were added to catalyze the luminol-H₂O₂ reaction.
  3. Aptamer immobilization: A specific DNA aptamer, designed to bind ATZ, was attached to the electrode surface. The aptamer was functionalized with a sulfhydryl group for stable binding to AgNPs via an Ag-S bond.
  4. BSA blocking: Bovine serum albumin (BSA) was used to block non-specific binding sites on the aptasensor surface, improving selectivity.

The detection mechanism is based on the principle of signal quenching. In the absence of ATZ, the AgNPs efficiently catalyze the luminol-H₂O₂ reaction, producing a strong ECL signal. Upon introduction of ATZ, it specifically binds to its aptamer on the electrode surface. This binding event creates a steric hindrance or a change in electron transfer, which interferes with the luminol-H₂O₂ reaction and consequently reduces the ECL intensity. The degree of ECL signal decrease is directly proportional to the ATZ concentration.

Characterization techniques included Cyclic Voltammetry (CV) to monitor electrochemical changes during fabrication and Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED), and Energy Dispersive X-ray Spectroscopy (EDS) to confirm the morphology, crystallinity, and elemental composition of the synthesized AgNPs. ECL measurements were performed using a specialized workstation.

Datasets

Not discussed in the paper. The study focuses on the development and validation of a sensor using standard chemical reagents and spiked environmental samples.

Key Insights and Ideas

  • Synergistic Catalysis and Recognition: The aptasensor ingeniously combines the catalytic power of AgNPs for ECL enhancement with the high specificity of DNA aptamers for ATZ recognition. This dual functionality is key to achieving both sensitivity and selectivity.
  • Signal Quenching as Detection Mechanism: Instead of a signal "turn-on," the sensor utilizes a "turn-off" mechanism where ATZ binding reduces the ECL signal. This approach can be advantageous in certain scenarios, offering a clear contrast between the presence and absence of the analyte.
  • AgNPs as Multifunctional Enhancers: AgNPs are not just catalysts for the luminol-H₂O₂ reaction; they also serve as a robust platform for immobilizing the aptamer via a stable Ag-S bond, contributing to the sensor's overall stability and performance.
  • Optimization is Crucial: The study highlights the importance of optimizing parameters like aptamer concentration, pH, incubation time, and scanning rate to achieve the best sensor performance, demonstrating a systematic approach to sensor development.

Key Results

  • High Sensitivity: The aptasensor achieved a low limit of detection (LOD) of 3.3 × 10⁻⁴ ng/mL.
  • Wide Linear Range: A broad linear range for ATZ detection was established, spanning from 1 × 10⁻³ ng/mL to 1 × 10³ ng/mL.
  • Good Stability and Reproducibility: The aptasensor demonstrated good stability over 10 days and excellent reproducibility with a relative standard deviation (RSD) of 3.42% for ATZ detection.
  • Satisfactory Specificity: The sensor showed high specificity for ATZ, with minimal interference from structurally similar pesticides like simazine and bromoxynil.
  • Real-World Applicability: The aptasensor was successfully applied to detect ATZ in actual samples of tap water, soil, and cabbage, yielding recovery rates between 89.13% and 123.03% with low RSD values.

Limitations and Future Work

  • LOD Comparison: While the LOD is low, the paper acknowledges that it's not the absolute lowest compared to all other methods (e.g., photoelectrochemical methods), though it offers a wider linear range.
  • On-site Application: The paper suggests the aptasensor has potential for on-site and real-time detection, implying that further development towards a portable, user-friendly device would be a logical next step.
  • Matrix Effects: Although tested on tap water, soil, and cabbage, further validation across a wider range of complex environmental and food matrices could be beneficial to fully assess potential matrix effects.
  • Long-term Stability: While stability over 10 days is good, investigating long-term storage stability of the fabricated electrodes would be valuable for practical applications.

Summary updated

Abstract

According to the chemiluminescence characteristics of the luminol-hydrogen peroxide (H2O2) system, this work designed a novel and effective electrochemiluminescence (ECL) aptasensor to detect atrazine (ATZ) rapidly. Silver nanoparticles (AgNPs) could effectively catalyze the decomposition of H2O2 and enhance the ECL intensity of the luminol-H2O2 system. Once ATZ was modified on the aptasensor, the ECL intensity was significantly weakened because of the specific combination between ATZ and its aptamer. Therefore, the changes in ECL intensity could be used to detect the concentration of ATZ. Under optimal detecting conditions, the aptasensor had a wide linear range from 1 × 10−3 ng/mL to 1 × 103 ng/mL and a low limit of detection (3.3 × 10−4 ng/mL). The designed aptasensor had the advantages of good stability, reproducibility, and specificity. The aptasensor could be used to detect the ATZ content of tap water, soil, and cabbage and had satisfactory results. This work effectively constructs a novel, effective, and rapid ECL aptasensor for detecting ATZ in actual samples.
BibTeX
@inproceedings{huang2022effective,
  author = {Xue Huang and He Li and Mengjiao Hu and Mengyuan Bai and Yemin Guo and Xia Sun},
  title = {{Effective Electrochemiluminescence Aptasensor for Detection of Atrazine Residue}},
  booktitle = {Sensors},
  year = {2022},
  url = {https://openreview.net/forum?id=OUZ5PSkeef},
}
Figure