Effect of the Rate of Nitrogen Application on Dry Matter Accumulation and Yield Formation of Densely Planted Maize

Juan Zhai, Guoqiang Zhang, Yuanmeng Zhang, Wenqian Xu, Ruizhi Xie, Bo Ming, Peng Hou, Keru Wang, Jun Xue, Shaokun LiSustainability 2022 · DOI

TL;DR

This study investigates how nitrogen application rates affect maize yield and dry matter accumulation under dense planting conditions. The key takeaway is that while increasing nitrogen generally boosts yield and dry matter, there's an optimal point beyond which further application yields diminishing returns, highlighting the importance of balanced fertilization for maximizing crop output and efficiency.

What Problem Does This Paper Address?

Feeding a growing global population while facing shrinking arable land is a major challenge. Increasing crop yield per unit area is crucial, and for maize, this often involves optimizing planting density and nitrogen fertilizer application. While dense planting can boost yield, it also increases the plant's demand for nutrients. Nitrogen fertilizer is a primary driver of crop growth and yield, but its overuse leads to environmental pollution. Therefore, understanding the precise relationship between nitrogen application rates, dry matter accumulation, and yield, especially under high-density planting, is critical for sustainable and efficient maize production. This paper aims to clarify these relationships, particularly for super-high-yield maize systems.

Methods

The researchers conducted a field experiment over three years using two maize varieties (DengHai 618 and XianYu 335) under two planting densities: 7.5 × 10⁴ plants ha⁻¹ (farmer density) and 12.0 × 10⁴ plants ha⁻¹ (high-yield density). They tested 18 different nitrogen application rates, ranging from no nitrogen (N0) to a very high rate (N765 kg ha⁻¹), using a drip irrigation and water-fertilizer integration system.

Key measurements included:

  • Grain Yield: Standardized to 14% moisture content.
  • Dry Matter Accumulation: Measured at various growth stages (6-leaf, 9-leaf, 12-leaf, silking, milk, wax, and mature stages).
  • Harvest Index: Calculated as grain yield divided by aboveground dry matter.
  • Logistic Curve Fitting: Used to model dry matter accumulation over time and determine parameters like the start and end of rapid accumulation, duration, maximum rate (Vmax), and maximum accumulation (Wmax).
  • Path Analysis: Employed to quantify the direct and indirect effects of nitrogen application, harvest index, and dry matter accumulation on yield.

Statistical analysis included Pearson correlation and ANOVA.

Datasets

The study utilized data collected from a field experiment conducted at the Qitai Farm in Xinjiang, China, from 2019 to 2021. This dataset comprises measurements of maize yield, dry matter accumulation at various stages, and harvest index under different combinations of planting densities and nitrogen application rates. No pre-existing public datasets were used for training or evaluation.

Key Insights and Ideas

  • Nitrogen Saturation Point: The study clearly demonstrates that maize yield, harvest index, and dry matter accumulation follow a "linear plus platform" trend with increasing nitrogen application. This means there's a point where adding more nitrogen doesn't significantly increase these metrics, indicating a saturation point for nitrogen's effectiveness.
  • Density Matters for Nitrogen Demand: Higher planting density (12.0 × 10⁴ plants ha⁻¹) not only requires more nitrogen to achieve optimal yield but also shifts the "turning points" for yield and dry matter accumulation to higher nitrogen application rates compared to lower densities.
  • Dry Matter Accumulation is King: Dry matter accumulation, particularly after silking, is the dominant factor influencing grain yield. The harvest index also plays a significant role, but the sheer amount of biomass produced is paramount.
  • Rate Over Duration: While nitrogen application can extend the duration of dry matter accumulation, the rate of accumulation is identified as the primary driver for overall dry matter accumulation and, consequently, yield. This suggests that optimizing the speed of biomass production is more critical than just prolonging the growth period.
  • Interplay of Factors: Path analysis revealed that nitrogen application influences yield both directly and indirectly through its effects on the harvest index and dry matter accumulation (both duration and rate). However, the direct impact on the rate of dry matter accumulation appears to be a more potent pathway to increased yield, especially at higher densities.

Key Results

  • Optimal Nitrogen Levels: The turning points for yield were found at approximately N = 279 kg ha⁻¹ for the 7.5 × 10⁴ plants ha⁻¹ density and N = 319 kg ha⁻¹ for the 12.0 × 10⁴ plants ha⁻¹ density. Similar turning points were observed for harvest index and dry matter accumulation, generally at slightly higher nitrogen rates.
  • Yield Gains: Under optimal nitrogen application, yields reached up to 18.86 t ha⁻¹ at the lower density and 20.14 t ha⁻¹ at the higher density.
  • Contribution to Yield: The harvest index contributed 22.9–27.2% to yield, while dry matter accumulation before and after silking collectively contributed over 70% to yield.
  • Dry Matter Dynamics: Increasing nitrogen application delayed the end of the rapid dry matter accumulation period, extending the duration and increasing the maximum accumulation rate. The maximum rate of dry matter accumulation showed a stronger positive correlation with total dry matter accumulation than the duration of rapid accumulation.

Limitations and Future Work

  • Environmental Specificity: The study was conducted in a specific arid region (Qitai, Xinjiang) with a sandy loam soil. While the findings provide valuable insights, their direct applicability to other agro-climatic zones and soil types may vary.
  • Variety Specificity: Only two maize varieties were tested. Further research could explore a wider range of varieties to assess if these responses are consistent across different genetic backgrounds.
  • Nitrogen Application Timing: While the study used integrated water-fertilizer and fractional fertilization, future work could delve deeper into the optimal timing of nitrogen application in conjunction with dense planting for even greater efficiency.
  • Economic Optimization: The study focused on physiological and yield responses. Future research could integrate economic analysis to determine the most cost-effective nitrogen application rates for farmers.
  • Long-Term Effects: The study was conducted over three years. Longer-term studies could reveal any cumulative effects of high nitrogen application or dense planting on soil health and subsequent crop performance.

Summary updated

Abstract

Planting maize (Zea mays L.) reasonably densely and adding amounts of appropriate nitrogen fertilizer are essential measures to improve the efficiency of maize yield and nitrogen use. In this study, two planting densities of 7.5 × 104 plants ha−1 and 12.0 × 104 plants ha−1 were established with the maize varieties DengHai 618 (DH618) and XianYu 335 (XY335). Simultaneously, 18 levels of nitrogen application were established, including a lack of nitrogen (N0) and increments of 45 kg ha−1 nitrogen up to 765 (N765) kg ha−1. The variables studied included the effects of the rate of nitrogen application on the characteristics of dry matter accumulation and the yield under drip irrigation, and they were integrated into water–fertilizer integration. The results indicated that the yield, harvest index, and dry matter accumulation of maize displayed a trend of increasing and then tending to be flat as the amount of nitrogen applied increased. The use of linear plus platform equation fitting indicated that the change in yield with nitrogen administered had the lowest turning point at N = 279 and N = 319, respectively. The next parameter that was measured was the harvest index. When highly dense maize was grown before silking, the rate of nitrogen applied was more obviously impacted by the accumulation of dry matter. The harvest index contributed 22.9–27.2% of the yield, and the total dry matter accumulation before and after silking contributed more than 70% of the production. Increasing the amount of nitrogen fertilizer is beneficial to prolonging the dry matter accumulation time and increasing the dry matter accumulation rate. The accumulation amount of dry matter was positively correlated with accumulation time and rate, and the correlation between dry matter and accumulation rate was greater. In conclusion, applying the right amount of nitrogen can dramatically increase the harvest index, accumulation of materials, and yield, with dry matter accumulation having the greatest influence on yield. The creation of dry matter is influenced by the time and rate of its accumulation, with its rate serving as the primary controlling factor.
BibTeX
@inproceedings{zhai2022effect,
  author = {Juan Zhai and Guoqiang Zhang and Yuanmeng Zhang and Wenqian Xu and Ruizhi Xie and Bo Ming and Peng Hou and Keru Wang and Jun Xue and Shaokun Li},
  title = {{Effect of the Rate of Nitrogen Application on Dry Matter Accumulation and Yield Formation of Densely Planted Maize}},
  booktitle = {Sustainability},
  year = {2022},
  doi = {10.3390/su142214940},
}
Figure