Effect of Structure-Controlled Ruthenium Oxide by Nanocasting in Electrocatalytic Oxygen and Chlorine Evolution Reactions in Acidic Conditions

Jisu Han, Hyung Jun An, Tae‐Wan Kim, Kwan-Young Lee, Hyung Ju Kim, Youngmin Kim, Ho-Jeong ChaeCatalysts 2019 · DOI

TL;DR

Researchers have developed a novel "nanocasting" technique to create a highly structured ruthenium oxide (RuO2) catalyst. This new catalyst exhibits significantly improved performance in both oxygen and chlorine evolution reactions compared to conventional RuO2, paving the way for more efficient electrochemical energy conversion and chemical production.

What Problem Does This Paper Address?

Ruthenium oxide (RuO2) is a promising material for electrocatalytic applications like oxygen evolution (crucial for energy storage and water splitting) and chlorine evolution (essential for the chlor-alkali industry). However, its high cost due to limited reserves necessitates improving its catalytic efficiency to reduce the amount needed. Existing RuO2 catalysts, often in nanoparticle form, can suffer from limited surface area and inefficient reactant access. This paper tackles the challenge of enhancing RuO2's electrocatalytic properties by precisely controlling its nanostructure to maximize its effectiveness.

Methods

The core innovation in this work is the nanocasting technique using a KIT-6 silica mesoporous material as a hard template. Here's a breakdown:

  • Template Synthesis: KIT-6, a silica material with a well-ordered, cubic mesoporous structure (Ia3d symmetry), was synthesized using a standard sol-gel method with Pluronic P123 as a surfactant.
  • Incipient Wetness Impregnation (IWI): A ruthenium precursor (RuCl3·xH2O) solution was infiltrated into the pores of the KIT-6 template.
  • Structure Formation: The impregnated material underwent ammonia treatment and calcination, converting the ruthenium precursor into RuO2 within the silica framework.
  • Template Removal: A subsequent treatment with a NaOH solution dissolved and removed the silica template, leaving behind a structure-controlled (SC) RuO2 replica that mirrors the KIT-6's porous architecture.
  • Characterization: The synthesized materials were thoroughly characterized using:
  • Transmission Electron Microscopy (TEM) and High-Resolution TEM (HRTEM) to visualize morphology and structure.
  • Small-Angle X-ray Scattering (SAXS) to confirm the ordered mesoporous structure.
  • Nitrogen adsorption-desorption isotherms to determine surface area and pore size distribution.
  • X-ray Diffraction (XRD) to analyze crystal structure.
  • Energy Dispersive X-ray Spectrometer (EDS) to confirm the removal of the silica template.
  • Electrochemical Analysis: The electrocatalytic performance for Oxygen Evolution Reaction (OER) and Chlorine Evolution Reaction (CER) was evaluated using:
  • Linear Sweep Voltammetry (LSV) to assess catalytic activity and onset potentials.
  • Electrochemical Impedance Spectroscopy (EIS) to investigate charge transfer resistance.
  • Chronoamperometry (CA) to evaluate long-term stability.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of a novel catalyst material, not on training or evaluating models on existing datasets.

Key Insights and Ideas

  • Structure Dictates Performance: The paper strongly demonstrates that precisely controlling the nanostructure of RuO2, specifically creating an ordered mesoporous framework, dramatically enhances its electrocatalytic activity and stability.
  • Nanocasting as a Powerful Tool: This work highlights nanocasting with KIT-6 as a facile and effective strategy for fabricating advanced nanostructured catalysts with tailored properties.
  • Enhanced Reactant Transport: The well-distributed, ordered pores in SC RuO2 likely promote better electrolyte permeability, allowing reactants to reach the active sites more efficiently.
  • Increased Surface Area: The mesoporous structure leads to a significantly higher surface area compared to commercial RuO2 nanoparticles, providing more active sites for catalysis.
  • Thin Walls, Big Impact: The thin walls of the SC RuO2 framework, mirroring the template's pore structure, contribute to a larger accessible surface area and potentially faster reaction kinetics.

Key Results

  • Structure-Controlled RuO2 (SC RuO2): The nanocasting method successfully produced SC RuO2 with an ordered mesoporous structure, replicating the KIT-6 template's architecture.
  • High Surface Area: SC RuO2 exhibited a surface area of 69.1 m² g⁻¹, which is seven times higher than that of commercial RuO2 (9.5 m² g⁻¹).
  • Improved OER Activity: SC RuO2 showed a 1.77 times higher current density for OER (272.7 mA cm⁻²) compared to commercial RuO2 (154.1 mA cm⁻²) at the same potential.
  • Improved CER Activity: SC RuO2 achieved a 1.75 times higher current density for CER (616.4 mA cm⁻²) compared to commercial RuO2 (352.1 mA cm⁻²).
  • Lower Charge Transfer Resistance: EIS analysis revealed lower charge transfer resistance (Rct) for SC RuO2 in both OER (430.6 Ω vs. 589.4 Ω) and CER (144.9 Ω vs. 170.9 Ω), indicating faster electron transfer.
  • Enhanced Stability: CA tests demonstrated that SC RuO2 maintained higher current densities over 60 minutes for both OER and CER, signifying superior long-term stability.

Limitations and Future Work

  • Cost of Ruthenium: While the efficiency is improved, the inherent high cost of ruthenium remains a factor. Future work could focus on further reducing the amount of ruthenium needed or exploring synergistic effects with less expensive materials.
  • Template Material: The use of a silica template adds steps to the synthesis. Investigating alternative, potentially more easily removable or reusable templates could be beneficial.
  • Electrolyte Specificity: The study was conducted in acidic (OER) and saline (CER) conditions. Further exploration in different electrolyte environments might be warranted.
  • Scale-up: The current synthesis is at a laboratory scale. Developing scalable methods for producing SC RuO2 would be crucial for industrial applications.
  • Mechanism Elucidation: While the structural benefits are clear, a deeper mechanistic understanding of how the ordered mesoporosity specifically influences the reaction pathways could lead to further optimization.

Summary updated

Abstract

RuO2 has been used for various applications because of its good catalytic properties. To further improve its electrocatalytic properties, we used a nanocasting technique. By using this technique, we obtained structure-controlled (SC) RuO2 with a high surface area and an ordered porous structure, which created enhanced electrocatalytic properties over commercial RuO2 nanoparticles for both oxygen and chlorine evolution reactions.
BibTeX
@inproceedings{han2019effect,
  author = {Jisu Han and Hyung Jun An and Tae‐Wan Kim and Kwan-Young Lee and Hyung Ju Kim and Youngmin Kim and Ho-Jeong Chae},
  title = {{Effect of Structure-Controlled Ruthenium Oxide by Nanocasting in Electrocatalytic Oxygen and Chlorine Evolution Reactions in Acidic Conditions}},
  booktitle = {Catalysts},
  year = {2019},
  doi = {10.3390/catal9060549},
}
Figure