Effect of stacking faults and surface roughness on the thermal conductivity of InAs nanowires

Kantawong Vuttivorakulchai, Mathieu Luisier, Andreas SchenkJournal of Applied Physics 2018 · DOI

Abstract

Low thermal conductivity and high power factor are desirable for thermoelectric materials. These properties can be achieved by patterning devices into nano-structures such as nanowires (NWs). The thermal conductivity can be further reduced by altering the NW geometry through the introduction of surface roughness (SR) or stacking faults (SFs). In this paper, relaxation times for scattering of phonons at SFs and SR are developed to accurately compute the impact of both effects on the thermal conductivity of InAs NWs with different diameters. It is found that similar reductions of the thermal conductivity can be obtained with SFs instead of SR. For the shortest possible distance between SFs along a NW, the room temperature thermal conductivity can be reduced to 25% compared to an ideal NW. For a NW with rough surface, a more than 80% decrease of the thermal conductivity is possible for specific roughness profiles. All available experimental data on the lattice thermal conductivity of InAs NWs confirm the theoretical models and simulation results.
BibTeX
@article{vuttivorakulchai2018effect,
  author = {Kantawong Vuttivorakulchai and Mathieu Luisier and Andreas Schenk},
  title = {{Effect of stacking faults and surface roughness on the thermal conductivity of InAs nanowires}},
  journal = {Journal of Applied Physics},
  year = {2018},
  doi = {10.1063/1.5051677},
}

Loading related content...

Figure