Effect of Silane-Modified Ammonium Polyphosphate on the Mechanical, Thermal, and Flame-Retardant Properties of Rice Husk/Polylactic Acid Composites

Yufeng Sun, Mingyang Liu, Ziheng Zhang, Hengyu Liu, Dongming Shi, Jilai Ying, Wenlong Mu, Defeng Li, Ing KongJournal of Composites Science 2025 · DOI

TL;DR

This paper tackles the flammability and mechanical limitations of polylactic acid (PLA) by developing a novel flame-retardant composite using rice husk and silane-modified ammonium polyphosphate (APP). The silane modification significantly boosts compatibility, leading to improved mechanical properties and excellent flame retardancy, meeting UL-94 V-0 standards.

What Problem Does This Paper Address?

Polylactic acid (PLA) is a promising biodegradable plastic with excellent processing versatility, making it attractive for applications in electronics and transportation. However, its inherent flammability and tendency to drip during combustion pose significant safety concerns, limiting its widespread adoption in these sectors. Traditional flame-retardant strategies often compromise PLA's mechanical integrity or introduce toxic byproducts. This research aims to overcome these limitations by developing a high-performance, eco-friendly flame-retardant PLA composite.

Methods

The study employed a multi-pronged approach:

  • Material Preparation: Rice husk (RH) was used as a carbon source, and ammonium polyphosphate (APP) as the acid and gas source for intumescent flame retardancy. APP was chemically modified with silane coupling agents (KH550 and KH570) to improve its compatibility with the PLA matrix.
  • Composite Fabrication: PLA composites were prepared by melt-blending PLA, RH, and either unmodified or silane-modified APP using a twin-screw extruder, followed by injection molding.
  • Characterization Techniques:
    • FTIR Spectroscopy: Used to confirm the presence of functional groups and assess the effectiveness of silane modification.
  • Thermogravimetric Analysis (TGA) and Derivative Thermogravimetric Analysis (DTG): To evaluate thermal stability and degradation behavior.
  • Flame Retardancy Testing: UL-94 vertical burning tests and Limiting Oxygen Index (LOI) measurements were conducted to assess fire resistance.
  • Fracture Surface Analysis (SEM): To examine the morphology of the composite fracture surfaces and understand interfacial adhesion.
  • Mechanical Property Testing: Tensile and flexural tests were performed to evaluate the mechanical performance.

Datasets

Not discussed in the paper. The study focuses on experimental synthesis and characterization of novel composite materials.

Key Insights and Ideas

  • Synergistic Flame Retardancy: The combination of rice husk (carbon source) and ammonium polyphosphate (acid/gas source) creates an effective intumescent flame-retardant system.
  • Silane Modification is Key: Simply adding APP to PLA can improve flame retardancy but often at the expense of mechanical properties due to poor compatibility. Silane coupling agents (KH550/KH570) are crucial for bridging the gap between APP and the PLA matrix.
  • Improved Dispersion and Interfacial Adhesion: Silane modification leads to better dispersion of APP within the PLA matrix, resulting in stronger interfacial bonding. This is visually confirmed by SEM images showing smoother fracture surfaces and fewer voids in modified composites.
  • Balanced Performance: The study successfully demonstrates a way to enhance flame retardancy without drastically sacrificing mechanical strength, a common trade-off in composite development.
  • Mechanism of Action: The silane-modified APP acts synergistically in both gas and condensed phases. In the gas phase, it releases non-flammable gases to dilute flammable ones. In the condensed phase, it promotes the formation of a stable, porous carbon char layer that acts as a barrier against heat and oxygen.

Key Results

  • Flame Retardancy: Composites with 10% and 15% APP (A10 and A15) achieved the UL-94 V-0 rating. The silane-modified versions (A10-K5 and A10-K7) further improved performance, with A10-K7 reaching an LOI of 29.4%.
  • Mechanical Properties:
    • Pure PLA had a tensile strength of 62.03 MPa and elongation at break of 3.72%.
  • Unmodified APP addition (e.g., A15) reduced tensile strength to 43.91 MPa and elongation at break to 3.08%.
  • Silane-modified APP (A10-K5) restored tensile strength to 59.92 MPa and increased elongation at break to 4.09%. A10-K7 showed similar improvements.
  • Thermal Stability: Silane-modified APP (KAPP-5) showed enhanced thermal stability with a higher char residue (21.7%) compared to unmodified APP.

Limitations and Future Work

  • FTIR Limitations: FTIR analysis alone was insufficient to definitively confirm silane functionalization, suggesting the need for complementary techniques like XRF or ICP-MS in future studies.
  • Biodegradability: While PLA and rice husk are biodegradable, standardized biodegradability tests were not conducted in this study. The authors suggest future work to assess the environmental footprint through controlled soil-based biodegradation assessments.
  • Melt Viscosity: Melt viscosity changes were not quantitatively measured, although the observed reduction in dripping was consistent with previous research linking char formation to increased melt viscosity.
  • Quantum Chemical Analyses: The authors note that quantum chemical analyses (e.g., NBO) were not performed, though the observed interactions align with established mechanisms.

The study provides a strong foundation for developing more sustainable and safer PLA-based materials, with clear directions for further research into their environmental impact and optimization.

Summary updated

Abstract

In this study, rice husk (RH, 15wt%) served as a carbonizing agent, and ammonium polyphosphate (APP) served as an acid and gas source. These were combined with polylactic acid (PLA) to develop a high-strength and flame-retardant PLA-based composite. The APP surface was modified with silane coupling agents (KH550 and KH570) to enhance the compatibility with the PLA matrix and improve both mechanical and flame-retardant properties. The composite was evaluated using UL-94 flame retardancy tests, limiting oxygen index (LOI) measurements, and mechanical properties assessments. The findings demonstrated that both PLA/RH-APP10% and PLA/RH-APP15% composites met the UL-94 V-0 standard. Increasing APP content enhanced flame retardancy but reduced mechanical strength. Compared to unmodified PLA composite, the PLA/KAPP5% composite exhibited an 18.7% increase in tensile strength, an elongation at break improvement from 3.26% to 4.09%, and a LOI of 27.9%. The silane modification significantly improved APP dispersion within the PLA matrix, increasing interfacial contact and improving overall mechanical properties. The flame retardancy improvements were attributed to reduced thermal decomposition rates and increased carbon residue formation.
BibTeX
@article{sun2025effect,
  author = {Yufeng Sun and Mingyang Liu and Ziheng Zhang and Hengyu Liu and Dongming Shi and Jilai Ying and Wenlong Mu and Defeng Li and Ing Kong},
  title = {{Effect of Silane-Modified Ammonium Polyphosphate on the Mechanical, Thermal, and Flame-Retardant Properties of Rice Husk/Polylactic Acid Composites}},
  journal = {Journal of Composites Science},
  year = {2025},
  doi = {10.3390/jcs9050251},
}
Figure