TL;DR
This paper investigates how electron irradiation affects InP-based High Electron Mobility Transistors (HEMTs), crucial for high-speed applications in space. The study reveals that while irradiation degrades DC performance (current, transconductance) and RF performance (cut-off frequencies), the devices show remarkable resilience, with only minor degradation even at high fluences, suggesting their suitability for radiation-rich environments.
What Problem Does This Paper Address?
High-speed electronic devices are essential for modern applications like advanced communication systems and space exploration. InP-based HEMTs are leading candidates for these demanding roles due to their exceptional high-frequency performance. However, devices operating in space are constantly exposed to radiation, which can degrade their performance and reliability. While radiation effects on other semiconductor materials like GaN and GaAs have been studied, there's a need for a comprehensive understanding of how electron irradiation specifically impacts InP-based HEMTs, particularly their DC characteristics, RF performance, and the often-problematic "kink effect." This paper aims to fill that gap by systematically analyzing these effects.
Methods
The researchers used a standard fabrication process for InP-based HEMTs, employing techniques like gas source molecular beam epitaxy (GSMBE) for material growth and electron beam lithography (EBL) for gate patterning. The core of the experimental approach involved exposing these fabricated HEMTs to a 1 MeV electron beam at three different fluences: 1 × 10<sup>14</sup> cm<sup>-2</sup>, 1 × 10<sup>15</sup> cm<sup>-2</sup>, and 1 × 10<sup>16</sup> cm<sup>-2</sup>. After irradiation, the devices' DC characteristics (output and transfer curves) and RF performance (cut-off frequencies) were meticulously measured at room temperature using a semiconductor parameter analyzer and a vector network analyzer. A charge control model was also employed to help understand the underlying mechanisms behind the observed changes in carrier concentration and mobility.
Datasets
Not discussed in the paper. The study utilizes fabricated InP-based HEMTs as the experimental subjects.
Key Insights and Ideas
- Radiation Induces Trap Charges: Electron irradiation introduces defects in the InP-based HEMTs, which act as trap charges. These traps are the primary culprits behind the observed degradation in DC performance.
- Mobility Degradation is Key: The reduction in carrier mobility, rather than a significant drop in carrier concentration, is identified as the main reason for the decrease in DC characteristics like channel current and transconductance.
- Kink Effect Mitigation: Surprisingly, the "kink effect" (an abrupt increase in drain-source current at low gate bias) becomes weaker with increasing electron fluence. This is attributed to a reduction in surface states in the gate-recess region.
- Frequency Performance Suffers, But Mildly: While the cut-off frequencies (f<sub>T</sub> and f<sub>max</sub>) show a slight downward trend with irradiation, the degradation is surprisingly small. This is linked to an increase in gate-drain capacitance (C<sub>GD</sub>) and the ratio C<sub>GD</sub>/C<sub>GS</sub>.
- Resilience for Space Applications: Despite the observed degradations, the overall performance loss is minimal, even at the highest fluence tested. This suggests that InP-based HEMTs possess a good degree of radiation tolerance, making them suitable for space applications.
Key Results
- DC Degradation: As irradiation fluence increased to 1 × 10<sup>16</sup> cm<sup>-2</sup>, the saturation channel current (I<sub>D,sat</sub>) decreased by 13.8%, and the specific channel on-resistance (R<sub>on</sub>) increased by 10.2%. The maximum transconductance (g<sub>m,max</sub>) slumped by 18.1%, and the maximum channel current (I<sub>D,max</sub>) dropped by 12.9%.
- Kink Effect: The kink effect was observed to be alleviated with increasing electron fluence.
- RF Performance: The current gain cut-off frequency (f<sub>T</sub>) and maximum oscillation frequency (f<sub>max</sub>) showed a slight downward trend. At a fluence of 1 × 10<sup>16</sup> cm<sup>-2</sup>, f<sub>T</sub> and f<sub>max</sub> were reduced by only 7.1% and 8.2%, respectively.
- Capacitance Changes: Gate-drain capacitance (C<sub>GD</sub>) increased with fluence, while gate-source capacitance (C<sub>GS</sub>) decreased. The ratio C<sub>GD</sub>/C<sub>GS</sub> increased, contributing to RF degradation.
Limitations and Future Work
The study acknowledges that the degradation of DC and RF properties becomes gradually apparent with increasing electron fluence. While the paper provides a good overview of the effects of 1 MeV electron irradiation, further investigations could explore:
- Different Radiation Types and Energies: The effects of other types of radiation (e.g., protons, heavy ions) and different electron energies could be investigated to provide a more comprehensive understanding of radiation tolerance.
- Long-Term Effects: The study focuses on immediate post-irradiation effects. Investigating the long-term stability and annealing behavior of these irradiated devices would be valuable for real-world applications.
- Device Optimization for Radiation Hardness: Based on the identified degradation mechanisms, future work could focus on designing and fabricating InP-based HEMTs with enhanced radiation hardness.
- Impact on Other Device Parameters: While key DC and RF parameters are covered, exploring the impact on other critical parameters like noise figure or linearity under irradiation would be beneficial.
Summary updated