Abstract
This paper investigates the performance impact of various dielectric substrate materials on a Compact Stacked Square Microstrip Antenna (CSSMA) integrated with an Electromagnetic Band Gap (EBG) structure. By simulating seven common dielectrics, the study identifies Roger's 4350 as the optimal substrate for maximizing efficiency and minimizing return loss, making it highly suitable for WLAN and vehicular communication applications.
Introduction
Microstrip antennas are widely utilized due to their compact profile and ease of integration. However, they are inherently limited by high return loss, low gain, and low efficiency, primarily caused by the generation of surface waves on the dielectric substrate. These waves trap power that would otherwise be radiated into space. Selecting the correct substrate is a critical engineering challenge, requiring a balance between mechanical durability, cost, and electrical properties such as the dielectric constant ($\epsilon_r$) and loss tangent. This study evaluates how commercially available substrates affect a specific stacked antenna design to guide data-driven material selection without significantly shifting the resonant frequency.
Methodology and Design
The researchers developed a Compact Stacked Square Microstrip Antenna (CSSMA) featuring a dual-layer dielectric configuration. The top layer consists of a 2.6mm air gap, while the bottom layer is a 1.6mm substrate of varying materials. Two 16x16mm square patches are mounted over the substrate and excited via a coaxial feed.
To mitigate surface wave interference, an Electromagnetic Band Gap (EBG) structure was incorporated. This structure utilizes a 40x40mm metallic ground plane etched with a grid of 1x1mm square slots to eliminate surface wave currents, thereby enhancing efficiency and cleaning up radiation patterns. A reflector plane positioned 8.5mm behind the ground plane further reduces back-lobe radiation. Simulations were conducted using IE3D software across seven substrates: Foam, Duroid, Benzocyclobuten, Roger 4350, Epoxy, FR4, Glass, and Duroid 6010.
Results and Discussion
The simulation results demonstrate a clear correlation between substrate material properties and antenna performance metrics. The study confirmed that as the electrical permittivity ($\epsilon_r$) of the substrate increases, the resonant frequency of the antenna slightly decreases.
Key Performance Insights
- Roger 4350 (Top Performer): This material provided the optimal "sweet spot," achieving a peak antenna efficiency of 99.66% and a superior return loss of -25.29 dB at a resonant frequency of 2.586 GHz.
- Foam (The Directivity Trap): While Foam yielded the highest directivity (5.09 dBi), it exhibited the worst efficiency (61%) and an unacceptable return loss (-4.145 dB), proving that directivity alone is an insufficient metric for substrate selection.
- FR4 (Budget Champion): FR4 performed remarkably well with 99.6% efficiency and -24.08 dB return loss, positioning it as a highly viable low-cost alternative for non-premium applications.
- High Permittivity Effects: Materials like Duroid 6010 ($\epsilon_r = 10.2$) shifted the resonant frequency down to 2.455 GHz but suffered significantly in efficiency (88.64%) and return loss (-9.449 dB).
Conclusion
The study confirms that substrate selection is paramount in optimizing CSSMA performance. Roger's 4350 is the ideal choice for high-efficiency applications, while FR4 offers a competitive balance of performance and cost. A limitation of this work is its reliance on simulation; future research should involve physical prototyping and environmental testing (e.g., humidity and temperature aging) to validate these findings in real-world conditions.
Summary updated