Edge Contacts to Atomically Precise Graphene Nanoribbons

Wenhao Huang, Oliver Braun, David I. Indolese, Gabriela Borin Barin, Guido Gandus, Michael Stiefel, Antonis Olziersky, Kläus Müllen, Mathieu Luisier, Daniele Passerone, Pascal Ruffieux, Christian Schönenberger, Kenji Watanabe, Takashi Taniguchi, Román Fasel, Jian Zhang, Michel Calame, Mickael L. PerrinACS 2023 · DOI

TL;DR

Researchers have developed a novel edge-contacting technique for atomically precise graphene nanoribbons (GNRs) encapsulated in hexagonal boron nitride (h-BN). This method enables ultrashort channel field-effect transistors (FETs) with significantly reduced contact resistance and footprint, paving the way for next-generation nanoelectronic devices.

What Problem Does This Paper Address?

Graphene nanoribbons (GNRs), particularly those synthesized with atomic precision, are highly promising for advanced electronic, spintronic, and thermoelectric applications due to their tunable electronic properties. However, a major bottleneck in realizing GNR-based devices has been the challenge of making reliable electrical contacts. Traditional methods, such as top metallic electrodes or bottom graphene electrodes, often suffer from contact resistance that scales with the overlap area and can introduce impurities or damage to the delicate GNR structures. This paper tackles this challenge by developing a new approach to contact GNRs at their edges, minimizing contact length and potentially overcoming the scaling limitations of existing methods.

Methods

The researchers employed a multi-faceted approach combining advanced fabrication techniques, sophisticated characterization methods, and theoretical calculations:

  • On-Surface Synthesis: Nine-atom-wide armchair GNRs (9-AGNRs) were synthesized on Au(111)-/mica substrates via on-surface polymerization of a precursor molecule (3',6'-diiodo-1,1':2',1'-terphenyl). This method yields nonaligned GNRs with an average length of 40-45 nm.
  • h-BN Encapsulation and Device Integration: A heterostructure was built by sandwiching the 9-AGNR film between two hexagonal boron nitride (h-BN) flakes. This encapsulation is crucial for protecting the GNRs from environmental degradation and providing an atomically flat, insulating substrate.
  • Edge Contact Fabrication: Metallic edge contacts were defined using a combination of electron-beam lithography (EBL) and reactive ion etching (RIE), followed by electron-beam-induced metal evaporation (Cr/Pd). This technique specifically targets the ends of the GNRs, creating ultrashort contacts.
  • Characterization Techniques:
    • Atomic Force Microscopy (AFM): Used to determine the thickness of h-BN layers and estimate channel lengths.
  • Scanning Transmission Electron Microscopy (STEM): Provided cross-sectional views of the device, confirming the layered heterostructure and estimating channel length.
  • Confocal Raman Spectroscopy: Used to verify the integrity of the GNRs after transfer and encapsulation.
  • Electrical Measurements: Conducted under vacuum at temperatures ranging from 9 K to 300 K. This included source-drain current (I<sub>DS</sub>) versus bias voltage (V<sub>DS</sub>) and gate voltage (V<sub>G</sub>) measurements to probe device performance and transport mechanisms.
  • Density Functional Theory (DFT) Calculations: Used to compute transmission curves for edge contacts versus top contacts, providing theoretical insights into the electronic properties and contact quality.

Datasets

Not explicitly discussed in the paper as distinct datasets for training or evaluation. The study relies on experimental measurements from fabricated devices and theoretical calculations.

Key Insights and Ideas

  • Edge Contacts as a Game Changer: The core innovation is the successful implementation of metallic edge contacts for GNRs. This bypasses the need for large overlap areas, a major limitation of previous methods, and allows for ultrashort channel lengths.
  • Dual Transport Mechanisms: The study reveals a fascinating temperature-dependent shift in charge transport mechanisms. At low temperatures (9 K), transport is dominated by single GNRs exhibiting quantum dot (QD) behavior. As temperature increases, a transition occurs around 100 K, and at room temperature, transport becomes a network phenomenon driven by hopping and polaron-assisted tunneling.
  • h-BN Encapsulation is Key: The use of h-BN is critical for device stability, air tightness, and achieving high-quality interfaces, which are essential for observing the subtle quantum phenomena in GNRs.
  • Atomically Precise Control: The ability to contact atomically precise GNRs opens doors to exploiting their unique electronic and topological properties for future quantum technologies.

Key Results

  • Ultrashort Channel FETs: Devices with channel lengths as short as ~20-40 nm were successfully fabricated and characterized.
  • Quantum Dot Behavior at Low Temperatures: At 9 K, devices exhibited clear Coulomb diamonds (CDs), indicative of quantum dot formation, with addition energies (E<sub>add.</sub>) ranging from 16 to 400 meV. This suggests transport through single or few GNRs.
  • Temperature-Activated Hopping Dominance: Above 100 K, charge transport shifted to a network-based mechanism, primarily temperature-activated hopping and polaron-assisted tunneling, allowing conduction across distances exceeding individual GNR lengths.
  • High On/Off Ratios: At room temperature, the 9-AGNR FETs achieved impressive on/off ratios as high as 3 × 10<sup>5</sup> with on-state currents up to 50 nA at 0.2 V.
  • Comparable Contact Performance: The edge-contact devices demonstrated contact performance comparable to traditional top/bottom contact geometries but with a significantly reduced footprint.
  • Field-Effect Mobility: The extracted field-effect mobility (µ<sub>FE</sub>) was around ~0.08 cm² V⁻¹ s⁻¹, which is competitive with other GNR network studies and attributed to the high-quality h-BN interface.

Limitations and Future Work

  • GNR Reactivity: The authors acknowledge that transferring reactive GNRs to devices remains a challenge, requiring the development of dry-transfer methods or chemical protection strategies.
  • Fringe Currents: The potential for fringe currents in organic thin films could lead to an overestimation of electron mobility, a common caveat in such studies.
  • Scalability of Edge Contacts: While promising, further research is needed to fully explore the scalability and reproducibility of this edge-contacting approach for mass production.
  • Exploring Other GNRs: The study focused on 9-AGNRs. Future work could extend this edge-contacting technique to other GNR geometries (e.g., zigzag edges) to investigate their unique topological and magnetic properties.
  • Device Integration: Integrating these GNR-based devices into more complex circuits and exploring their spintronic and thermoelectric applications are logical next steps.

Summary updated

Abstract

Bottom-up-synthesized graphene nanoribbons (GNRs) are an emerging class of designer quantum materials that possess superior properties, including atomically controlled uniformity and chemically tunable electronic properties. GNR-based devices are promising candidates for next-generation electronic, spintronic, and thermoelectric applications. However, due to their extremely small size, making electrical contact with GNRs remains a major challenge. Currently, the most commonly used methods are top metallic electrodes and bottom graphene electrodes, but for both, the contact resistance is expected to scale with overlap area. Here, we develop metallic edge contacts to contact nine-atom-wide armchair GNRs (9-AGNRs) after encapsulation in hexagonal boron-nitride (<i>h</i>-BN), resulting in ultrashort contact lengths. We find that charge transport in our devices occurs via two different mechanisms: at low temperatures (9 K), charges flow through single GNRs, resulting in quantum dot (QD) behavior with well-defined Coulomb diamonds (CDs), with addition energies in the range of 16 to 400 meV. For temperatures above 100 K, a combination of temperature-activated hopping and polaron-assisted tunneling takes over, with charges being able to flow through a network of 9-AGNRs across distances significantly exceeding the length of individual GNRs. At room temperature, our short-channel field-effect transistor devices exhibit on/off ratios as high as 3 × 10<sup>5</sup> with on-state current up to 50 nA at 0.2 V. Moreover, we find that the contact performance of our edge-contact devices is comparable to that of top/bottom contact geometries but with a significantly reduced footprint. Overall, our work demonstrates that 9-AGNRs can be contacted at their ends in ultra-short-channel FET devices while being encapsulated in <i>h</i>-BN.
BibTeX
@inproceedings{huang2023edge,
  author = {Wenhao Huang and Oliver Braun and David I. Indolese and Gabriela Borin Barin and Guido Gandus and Michael Stiefel and Antonis Olziersky and Kläus Müllen and Mathieu Luisier and Daniele Passerone and Pascal Ruffieux and Christian Schönenberger and Kenji Watanabe and Takashi Taniguchi and Román Fasel and Jian Zhang and Michel Calame and Mickael L. Perrin},
  title = {{Edge Contacts to Atomically Precise Graphene Nanoribbons}},
  booktitle = {ACS},
  year = {2023},
  doi = {10.1021/acsnano.3c00782},
}
Figure