Dynamic response of continuous beams with discrete viscoelastic supports under sinusoidal loading

Bing Li, Shaohua Wang, Xiao Wu, Bin WangInternational Journal of Mechanical Sciences 2014 · DOI

TL;DR

This paper presents a combined theoretical and finite element analysis to understand the dynamic response of bridge expansion units under traffic loading. By modeling these units as continuous beams with viscoelastic supports, the researchers provide a framework for optimizing their design to mitigate vibration and prevent fatigue failure.

What Problem Does This Paper Address?

Bridge expansion units are critical components that accommodate thermal expansion and contraction, preventing structural damage. However, they are subjected to dynamic loads from traffic, which can lead to fatigue failure. Existing research often focuses on the overall performance of these units, with less emphasis on the specific dynamic behavior of individual beams and the influence of viscoelastic supports. This paper aims to fill that gap by providing a detailed analysis of the dynamic response of these complex structures, specifically addressing how viscoelastic supports affect vibration attenuation and how to optimize their design for improved performance and durability.

Methods

The authors employ a two-pronged approach:

  • Theoretical Modeling: They utilize the Euler-Bernoulli beam theory and the Ritz approach to develop a theoretical model for the dynamic response of continuous beams with discrete viscoelastic supports. This model captures the vibration of both I-beams and crossbeams under sinusoidal loading.
  • Finite Element Analysis (FEA): A parallel analysis is conducted using ABAQUS software, employing 3D beam elements to simulate the behavior of the expansion unit. This allows for a detailed examination of stresses and displacements.

The theoretical and FEA results are then compared to validate the models. The study also introduces an "impact coefficient" to quantify the magnification of displacement due to moving loads.

Datasets

Not discussed in the paper. The study relies on theoretical models and simulations rather than experimental datasets.

Key Insights and Ideas

  • Viscoelastic Supports are Crucial: The study highlights the significant role of viscoelastic supports in attenuating vibrations. Their stiffness and damping coefficients are key parameters for controlling the dynamic response.
  • I-beams are More Prone to Fatigue: The analysis reveals that I-beams experience substantially larger bending displacements than crossbeams, making them more susceptible to fatigue failure under dynamic loading.
  • Traffic Speed Matters: The peak displacement of I-beams is highly sensitive to traffic speed, with a particular velocity at which maximum displacement occurs. This critical speed needs to be identified for design and maintenance.
  • Impact Coefficient for Design: The introduction of an impact coefficient provides a practical tool for engineers to estimate maximum dynamic displacements from static analysis, simplifying design considerations.

Key Results

  • The theoretical model and FEA results show good agreement, validating the proposed analytical framework.
  • The study demonstrates that the damping effect of the viscoelastic supports is strong, leading to moderate and quickly attenuated vibrations.
  • For a specific case (B=80mm, v=100km/h), the decay time of vibrations is shown to reduce rapidly with increasing damping coefficient.
  • An impact coefficient of 1.36 was calculated for a specific scenario (B=40mm, 80km/h), indicating that the maximum bending stress can be 1.36 times that of the static case.

Limitations and Future Work

  • Experimental Validation: The authors acknowledge that while theoretical and FEA results show good agreement, experimental measurements are yet to be performed. This comparison remains a scope for future work.
  • Simplified Boundary Conditions: The analytical model uses simple-supported boundary conditions for the I-beams, which differ from the actual discrete supports. The authors note that this approximation simplifies the derivation but may introduce some error, which they plan to discuss further.
  • Focus on Sinusoidal Loading: The study focuses on sinusoidal loading. Future work could explore more complex and realistic traffic load models.

Summary updated

BibTeX
@article{li2014dynamic,
  author = {Bing Li and Shaohua Wang and Xiao Wu and Bin Wang},
  title = {{Dynamic response of continuous beams with discrete viscoelastic supports under sinusoidal loading}},
  journal = {International Journal of Mechanical Sciences},
  year = {2014},
  doi = {10.1016/j.ijmecsci.2014.02.005},
}
Figure