Dynamic origin of the morphotropic phase boundary: Soft modes and phase instability in<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mn>0.68</mml:mn><mml:mtext>Pb</mml:mtext><mml:mrow><mml:mo>(</mml:mo><mml:mrow><mml:msub><mml:mrow><mml:mtext>Mg</mml:mtext></mml:mrow><mml:mrow><mml:mn>1</mml:mn><mml:mo>/</mml:mo><mml:mn>3</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mrow><mml:mtext>Nb</mml:mtext></mml:mrow><mml:mrow><mml:mn>2</mml:mn><mml:mo>/</mml:mo><mml:mn>3</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mtext>O</mml:mtext><mml:mn>3</mml:mn></mml:msub></mml:mrow><mml:mo>)</mml:mo></mml:mrow><mml:mtext>−</mml:mtext><mml:mn>0.32</mml:mn><mml:msub><mml:mrow><mml:mtext>PbTiO</mml:mtext></mml:mrow><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>

Hu Cao, Chris Stock, Guangyong Xu, P. M. Gehring, Jiefang Li, D. ViehlandPhysical 2008 · DOI

TL;DR

This paper investigates the dynamic origin of the morphotropic phase boundary (MPB) in PMN-0.32PT, a key material for piezoelectric applications. By using neutron inelastic scattering and X-ray diffraction, the researchers found that the MPB can be dynamically defined by the temperature where the soft mode "recovers" and the structural transition temperature coincide, suggesting a universal dynamic behavior in these materials.

What Problem Does This Paper Address?

Materials like lead magnesium niobate-lead titanate (PMN-xPT) exhibit exceptional piezoelectric properties, particularly near their morphotropic phase boundary (MPB). This MPB is a region in composition where two ferroelectric phases, rhombohedral (R) and tetragonal (T), coexist. While the MPB is known to be crucial for high piezoelectric performance, the underlying microscopic mechanisms driving this behavior, especially the dynamic aspects, remain incompletely understood. Specifically, how the lattice dynamics, particularly the "soft mode" (a key indicator of ferroelectric instability), behave across the MPB and how this relates to the structural transitions is a critical question. Previous studies on pure PMN (a relaxor ferroelectric with no sharp transition) and PMN-0.60PT (a conventional ferroelectric) showed different behaviors of the soft mode recovery relative to their transition temperatures. This paper aims to bridge this gap by studying PMN-0.32PT, which lies precisely within the MPB, to understand the dynamic interplay between soft modes and phase transitions.

Methods

The researchers employed two primary experimental techniques:

  • Neutron Inelastic Scattering: This technique probes the vibrational dynamics of the crystal lattice. By measuring the energy and momentum of scattered neutrons, they could identify and characterize phonon modes, particularly the "soft mode" which is crucial for ferroelectric transitions. They used a triple-axis spectrometer at the NIST Center for Neutron Research.
  • High-Resolution X-ray Diffraction (XRD): This technique was used to determine the crystal structure and lattice parameters as a function of temperature and applied electric field. This allowed them to precisely identify structural phase transitions (cubic to tetragonal, and to monoclinic).

They performed constant-Q scans (measuring phonon intensity at fixed momentum transfer) and analyzed the data by fitting it to a model of damped harmonic oscillators. They also performed temperature-dependent dielectric constant measurements.

Datasets

Not discussed in the paper. The study relies on experimental measurements performed by the authors.

Key Insights and Ideas

  • Dynamic Definition of the MPB: The study proposes that the MPB can be dynamically defined as the specific PT concentration where the temperature of the structural transition (Tc) coincides with the temperature at which the soft mode "recovers" its energy.
  • Universal Soft Mode Behavior Below the MPB: For compositions on the Ti-poor side of the MPB (like pure PMN and PMN-0.32PT), the soft mode dynamics (temperature dependence and energy scale) are remarkably similar and independent of concentration, even though the structural transitions differ significantly.
  • Soft Mode "Recovery": In conventional ferroelectrics, the soft mode energy (related to its frequency) goes to zero at the transition temperature. In relaxors and materials near the MPB, the soft mode doesn't fully go to zero but instead "recovers" its energy as temperature decreases below a certain point, a behavior that is now understood as a signature of ferroelectric-like dynamics.
  • Phase Instability in the Cubic Phase: The observation that the cubic-to-tetragonal phase boundary shifts significantly with an applied electric field, even in the apparently cubic phase, suggests an underlying instability within this phase near the MPB.
  • Disorder as a Key Factor: The strong damping of the soft mode, observed across both relaxor and ferroelectric phases, is suggested to be directly correlated with the disorder introduced by the mixing of different cations (Mg, Nb, Ti) in these complex perovskite structures.

Key Results

  • PMN-0.32PT Soft Mode Behavior: The soft mode in PMN-0.32PT exhibits a behavior similar to pure PMN, with its recovery temperature well above its structural transition temperature (Tc ≈ 410 K). This contrasts with PMN-0.60PT, where the soft mode recovery temperature coincides with Tc (≈ 550 K).
  • Structural Transitions: For PMN-0.32PT, high-resolution XRD revealed two phase transitions on cooling: a cubic-to-tetragonal (C→T) transition near 410 K and a subsequent transition to a monoclinic phase (T→Mc) around 320 K.
  • Electric Field Effects: An applied electric field along the [001] direction significantly shifts the C→T boundary to higher temperatures, particularly for fields above 2.5 kV/cm, indicating an incipient instability in the cubic phase.
  • Phonon Damping: The transverse optic (TO) phonon mode shows significant damping, especially at low wave vectors, a phenomenon known as the "waterfall effect," which persists across different phases. The damping is found to be larger in PMN-0.32PT compared to pure PMN, suggesting increased phase instability.

Limitations and Future Work

  • Limitations: The paper acknowledges that directly resolving the zone-center soft mode energy at 600 K is difficult due to large damping effects, requiring extrapolation. While the study compares its findings to previous work on PMN and PMN-0.60PT, a comprehensive mapping of the entire PMN-xPT phase diagram with consistent techniques would be beneficial. The authors also note that their findings contradict some aspects of a previous study on zero-field-cooled PMN-0.32PT regarding TA-TO coupling.
  • Future Work: The authors suggest that their findings establish dynamical characteristics unique to MPB ferroelectrics. Further investigations into the relationship between phonon behavior, diffuse scattering, and the high piezoelectric constants are warranted. The universal nature of the low-frequency dynamics below the MPB and the scaling with Tc above the MPB also point towards deeper theoretical modeling efforts, potentially using random-field models. The observed phase instability in the cubic phase near the MPB also opens avenues for further experimental and theoretical exploration.

Summary updated

Abstract

We report neutron inelastic scattering and high-resolution x-ray diffraction measurements on single crystal $0.68\text{Pb}({\text{Mg}}_{1/3}{\text{Nb}}_{2/3}{\text{O}}_{3})\text{\ensuremath{-}}0.32{\text{PbTiO}}_{3}$ (PMN-0.32PT), a relaxor ferroelectric material that lies within the compositional range of the morphotropic phase boundary (MPB) where the piezoelectric properties of $\text{PMN-}x\text{PT}$ compounds are close to maximal. Data were obtained between 100 and 600 K under zero and nonzero electric field applied along the cubic [001] direction. The lowest-energy, zone-center, transverse optic phonon is strongly damped and softens slowly at high temperature; however, the square of the soft-mode energy begins to increase linearly with temperature as in a conventional ferroelectric, which we term the soft-mode ``recovery,'' upon cooling into the tetragonal phase at ${T}_{C}$. Our data show that the soft mode in PMN-0.32PT behaves almost identically to that in pure PMN, exhibiting the same temperature dependence and recovery temperature even though PMN exhibits no well-defined structural transition (no ${T}_{C}$). The temperature dependence of the soft mode in PMN-0.32PT is also similar to that in PMN-0.60PT; however, in PMN-0.60PT the recovery temperature equals ${T}_{C}$. These results suggest that the temperature dependence and the energy scale of the soft-mode dynamics in $\text{PMN-}x\text{PT}$ are independent of concentration on the Ti-poor side of the MPB, but scale with ${T}_{C}$ for Ti-rich compositions. Thus the MPB may be defined in lattice dynamical terms as the concentration where ${T}_{C}$ first matches the recovery temperature of the soft mode. High-resolution x-ray studies show that the cubic-to-ferroelectric phase boundary shifts to higher temperatures by an abnormal amount within the MPB region in the presence of an electric field. This suggests that an unusual instability exists within the apparently cubic phase at the MPB.
BibTeX
@inproceedings{cao2008dynamic,
  author = {Hu Cao and Chris Stock and Guangyong Xu and P. M. Gehring and Jiefang Li and D. Viehland},
  title = {{Dynamic origin of the morphotropic phase boundary: Soft modes and phase instability in<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mn>0.68</mml:mn><mml:mtext>Pb</mml:mtext><mml:mrow><mml:mo>(</mml:mo><mml:mrow><mml:msub><mml:mrow><mml:mtext>Mg</mml:mtext></mml:mrow><mml:mrow><mml:mn>1</mml:mn><mml:mo>/</mml:mo><mml:mn>3</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mrow><mml:mtext>Nb</mml:mtext></mml:mrow><mml:mrow><mml:mn>2</mml:mn><mml:mo>/</mml:mo><mml:mn>3</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mtext>O</mml:mtext><mml:mn>3</mml:mn></mml:msub></mml:mrow><mml:mo>)</mml:mo></mml:mrow><mml:mtext>−</mml:mtext><mml:mn>0.32</mml:mn><mml:msub><mml:mrow><mml:mtext>PbTiO</mml:mtext></mml:mrow><mml:mn>3</mml:mn></mml:msub></mml:mrow></mml:math>}},
  booktitle = {Physical},
  year = {2008},
  doi = {10.1103/physrevb.78.104103},
}
Figure