Dynamic mechanical modulation of chiroptical structures via linearly assembled plasmonic nanoparticles on birefringent polymer films

Xiao Meng, Yisheng He, Botyo Dimitrov, Bowen Jin, Zhenghua Zhu, Liang Yuan, Vladimir V. Tsukruk, Chunhong YeNature Communications 2025 · DOI

Abstract

Plasmonic chiral materials exhibiting strong dynamic circular dichroism (CD) with a high asymmetric g-factor are desired for diverse optical applications such as optical communication, especially in the near-infrared (NIR) spectral range, but are rarely achieved. Here, we show a chiroptical flexible film composed of an array of linearly aligned plasmonic nanosphere chains with an elastic polymer substrate. These nanomaterials are capable of light polarization rotation up to 40° and a g-factor of 1.71 in the NIR wavelength. Such high ellipticity stems from the interplay of high linear dichroism (LD) and linear birefringence (LB). The nanoparticle chains manifest LD at plasmonic resonance, which, combined with the stretching-induced LB of the elastic substrate providing phase retardance, enables strong chiroptical activity. The configuration offers dynamical and reversible tuning of all critical chiroptical characteristics, including handedness, magnitude, and frequency, via the assembly angle of plasmonic chains, chain length, and the stretching degree of substrates.

Introduction

Chiral materials interact differently with left- and right-circularly polarized light, a property known as circular dichroism (CD). This interaction is essential for advanced technologies such as 3D displays, secure optical communications, and sensitive bio-detection. However, creating materials with strong CD signals and high optical asymmetry (quantified by the $g$-factor) is challenging, particularly in the near-infrared (NIR) range. Existing "bottom-up" fabrication methods often struggle with low signal intensity, while "top-down" lithographic approaches are expensive and produce static structures. There is a significant need for a platform that is easy to manufacture, yields high-performance chiroptical signals, and allows for dynamic modulation of its properties.

Methods and Mechanism

The researchers employed a hybrid strategy that separates the two components necessary for generating "apparent" circular dichroism: Linear Dichroism (LD) and Linear Birefringence (LB).

  1. Nanoparticle Assembly: Highly ordered, parallel chains of gold nanospheres (AuNSs) were created on a flat polydimethylsiloxane (PDMS) substrate using template-assisted capillary assembly. These chains provide the LD by absorbing light differently depending on its linear polarization relative to the chain axis.
  2. Mechanical Stretching: By stretching the elastic PDMS substrate, LB is induced. The stretching aligns the polymer chains, causing the material to act as a phase retarder.
  3. Configuration: The strongest chiroptical response occurs when the nanoparticle chains are oriented at specific angles (ideally ±45°) relative to the stretching direction. The phase retardance from the substrate converts linearly polarized light (filtered by the nanoparticle chains) into circularly polarized light.
Schematic of the chiroptical film mechanism showing how the combination of linear dichroism from AuNS chains and linear birefringence from the stretched PDMS substrate generates tunable circular dichroism.

Key Insights

  • Efficiency of Apparent Chirality: Instead of complex 3D chiral shapes, a 2D stack of LD and LB layers is more efficient and easier to tune.
  • Mechanical Tuning: Stretching is the active mechanism for modulation. Increasing the strain changes the birefringence, which directly controls the CD magnitude and frequency.
  • Symmetry Breaking: Flipping the assembly angle from +45° to -45° completely reverses the handedness of the CD signal.
  • Universal Strategy: This approach is applicable to various polymer substrates, including common commercial films like polyethylene (PE) and PVC, which naturally exhibit birefringence due to manufacturing processes.

Key Results

The system achieved record-breaking performance metrics for research-grade plasmonic films:

  • Record Asymmetry: A $g$-factor of 1.71 was recorded at 880 nm, approaching the theoretical maximum of 2.0.
  • High CD Intensity: CD signals up to 40° were observed, significantly higher than the <20° typically seen in planar metasurfaces.
  • Dynamic Range: The CD signal could be boosted by more than five times by increasing the substrate strain from 0.1 to 0.5.
  • Reversibility: The chiroptical performance remained stable and repeatable over multiple stretching/releasing cycles.
Characterization and performance of the chiroptical film, including SEM imagery of the AuNS chains, strain-dependent CD spectra, g-factor analysis, and a comparison of performance against other state-of-the-art plasmonic chiral systems.

Limitations and Future Work

While the results are impressive, the absolute CD intensity is still lower than some high-end commercial circular polarizers. Additionally, surface roughness on commercial films like PE can interfere with uniform nanoparticle assembly, leading to weaker signals compared to optimized PDMS samples. Future work will focus on integrating this platform into wearable sensors or active components for NIR optical communication, where dynamic control of light polarization is a major advantage.

Summary updated

Abstract

Plasmonic chiral materials exhibiting strong dynamic circular dichroism (CD) with a high asymmetric g-factor are desired for diverse optical applications such as optical communication, especially in near infrared (NIR) spectral range but rarely achieved. Here, we show a chiroptical flexible film composed of an array of linearly aligned plasmonic nanosphere chains with an elastic polymer substrate. These nanomaterials are capable of light polarization rotation up to 40° and a g-factor of 1.71 in NIR wavelength. Such high ellipticity stems from the interplay of high linear dichroism (LD) and linear birefringence (LB). The nanoparticle chains manifest LD at plasmonic resonance, which, combined with the stretching-induced LB of the elastic substrate providing phase retardance, as confirmed by simulation. The configuration offers dynamical and reversible tuning of all critical chiroptical characteristics, including handedness, magnitude, and frequency, via the assembly angle of plasmonic chains, chain length, and the stretching degree of substrates. This strategy is universally applicable to various polymer substrates by combining with plasmonic nanoparticle assembly, enabling the design of flexible chiroptical materials with strong and dynamically tunable chiroptical performance.
BibTeX
@inproceedings{meng2025dynamic,
  author = {Xiao Meng and Yisheng He and Botyo Dimitrov and Bowen Jin and Zhenghua Zhu and Liang Yuan and Vladimir V. Tsukruk and Chunhong Ye},
  title = {{Dynamic mechanical modulation of chiroptical structures via linearly assembled plasmonic nanoparticles on birefringent polymer films}},
  booktitle = {Nature Communications},
  year = {2025},
  doi = {10.1038/s41467-025-60165-x},
}
Figure