Dynamic Characteristics Analysis of the Hydraulic Arm of Mobile Coal Sampling Robot

Yuan-Fang Li, Haibo Xu, Jun Wang, Rong Deng, Yufeng Lin2018 · DOI

Abstract: Dynamic characteristics of the hydraulic arm affects the mobile coal sampling robot's accuracy and efficiency. The complex and varied working conditions put many high requirements on the stability of the hydraulic arm. This paper took the hydraulic arm of the MCYY2000 mobile coal sampling robot as the research object, and established a simplified model of the hydraulic arm with SolidWorks. It carried out the analysis under both the condition of no-sampling resistance and the condition of variable sampling resistance. The analysis was done with the module of multi-body dynamics simulation in Simulink. This paper helps to obtain the joint torques and hydraulic driving forces of the hydraulic arm under different conditions. The results provide a basis for further work including accurate motion control, chatter reduction and safety improvement of the coal sampling robot.

Introduction

Coal sampling is a critical process for power plants and steel mills to ensure fuel quality, but manual collection is labor-intensive, slow, and often inaccurate. While mobile robots like the MCYY2000 offer a mechanized solution, their hydraulic arms operate in harsh, unpredictable environments.

The MCYY2000 mobile coal sampling robot, featuring a truck-mounted hydraulic arm system.

The "brain" of the robot needs to know exactly how much force to apply to move the arm smoothly and how to react when the sampling head hits a dense pile of coal. Without a deep understanding of the dynamic characteristics—the shifting torques and forces within the arm's joints—the robot may suffer from "chatter" (excessive vibration), poor accuracy, or even mechanical failure. This research maps those forces through virtual prototyping to provide a foundation for improved control systems.

Methodology

The researchers employed a multi-stage simulation workflow to analyze the MCYY2000's hydraulic arm:

  1. CAD Modeling: A simplified 3D model was built in SolidWorks. Simplification was necessary to reduce computational overhead while maintaining the physical integrity of the movement mechanism, including the base, arms, telescopic sections, and mast.
  2. Multi-Body Dynamics: The model was imported into MATLAB/Simulink using the Simscape Multibody module. This allowed the researchers to treat the arm as a system of rigid bodies connected by joints and powered by hydraulic cylinders.
  3. Virtual Sensing: Torque and force sensors were integrated into the rotating joints and hydraulic cylinders within the simulation to gather real-time data.
The simplified 3D model of the hydraulic arm used for multi-body dynamics simulation.

The simulation utilized the actual design parameters of the MCYY2000, such as the specific lengths of the upper arm (2900mm) and second arm (2700mm), and joint angle ranges (e.g., 66-130° for the base joint). The arm was tested under two primary scenarios: no-sampling resistance (idle positioning) and variable sampling resistance (simulating vertical insertion and lifting with forces up to 6000 N).

Analysis of Dynamic Characteristics

The study revealed several key insights into the arm's behavior under different working conditions:

  • Gravity vs. External Load: In the idle state, the hydraulic cylinders primarily work to overcome gravity. However, during active sampling, the external resistance of the coal becomes the dominant force, causing "sharp turning" changes in the torque curves.
  • Primary Load Bearers: Joint 1 (the base joint) and Joint 2 consistently experience the highest torques. Similarly, the first and second hydraulic cylinders bear the brunt of the load during sampling, showing the highest amplitude of change.
  • Stability of Joint 3: Interestingly, Joint 3 and its associated cylinder remain relatively stable across both working conditions, suggesting they play a supportive or stabilizing role rather than a primary power-delivery role.
  • Inertial Effects: Because the sampling head moves at a relatively low speed, the researchers found that inertial forces and torques are negligible compared to the massive external resistance of the coal itself.

Key Results and Validation

Under no-load conditions, joint torques change smoothly and within a small range as the mast extends. However, when resistance is introduced (simulating hitting a coal heap), the curves lose their smoothness, exhibiting distinct "spikes" and sharp transitions that correspond to the sampling head entering and exiting the material. These simulation results were found to be in accordance with actual field observations of the MCYY2000, validating the virtual prototype as a reliable tool for engineering development.

Conclusion and Future Work

While this study provides a robust mechanical analysis, it focuses on rigid-body dynamics rather than the fluid dynamics within the hydraulic lines. Future work could integrate hydraulic pressure and flow models for even higher fidelity. Additionally, the current model uses simplified friction; real-world joint wear-and-tear could be explicitly modeled in later iterations. The data obtained here provides the essential physical basis for developing advanced control algorithms that can automatically compensate for shifting forces, ultimately preventing chatter and improving sampling precision.

Summary updated

Abstract

Dynamic characteristics of the hydraulic arm affects the mobile coal sampling robot's accuracy and efficiency. The complex and varied working conditions put many high requirements on the stability of the hydraulic arm. This paper took the hydraulic arm of the MCYY2000 mobile coal sampling robot as the research object, and established a simplified model of the hydraulic arm with SolidWorks. It carried out the analysis under both the condition of no-sampling resistance and the condition of variable sampling resistance. The analysis was done with the module of multi-body dynamics simulation in Simulink. This paper helps to obtain the joint torques and hydraulic driving forces of the hydraulic arm under different conditions. The results provide a basis for further work including accurate motion control, chatter reduction and safety improvement of the coal sampling robot.
BibTeX
@misc{li2018dynamic,
  author = {Yuan-Fang Li and Haibo Xu and Jun Wang and Rong Deng and Yufeng Lin},
  title = {{Dynamic Characteristics Analysis of the Hydraulic Arm of Mobile Coal Sampling Robot}},
  year = {2018},
  doi = {10.2991/eame-18.2018.46},
}

Loading related content...

Figure