Abstract
The structure of 5-UPS/PRPU redundant parallel manipulator is introduced. The degree of freedom and redundant type of this manipulator is analyzed. And, the dynamic equations of five UPS branches and a PRPU branch are established with Lagrange Method. This study provides theoretical basis for the control system of 5-UPS / PRPU redundant parallel manipulator.
Introduction
Parallel manipulators are highly valued in robotics for their high stiffness and payload capacity. However, they are often limited by singular configurations and restricted workspaces. Redundant driving, where a system has more actuators than degrees of freedom (DOF), is a promising solution to these issues. This paper investigates a 5-UPS/PRPU configuration, proposing to transform a typically passive constraint branch into an active one to eliminate "creeping" phenomena—jerky movements caused by friction and inertia—and improve high-precision control.
Structural and Mobility Analysis
The 5-UPS/PRPU architecture consists of five UPS (Universal-Prismatic-Spherical) branches and one central PRPU (Prismatic-Revolute-Prismatic-Universal) branch.
Applying the Kutzbach-Grübler criterion, the system's mobility is determined to be 5 DOF. Since there are six potential actuators (one for each branch), the manipulator is classified as redundantly driven. This redundancy allows for strategic force distribution to optimize performance and smooth out motion.
Dynamic Modeling
The authors utilize the Lagrange Method ($L = T - V$) to derive the dynamic equations. This energy-based approach simplifies the modeling of complex multi-branch systems by focusing on total kinetic and potential energy rather than internal joint forces.
A key challenge in this redundant system is that the driving force mapping does not have a standard inverse. The authors derive a specific dynamic mapping to distribute forces among the six actuators. By activating the central PRPU branch, the system can actively counteract the frictional forces that typically degrade the performance of passive restraint branches.
Conclusion
This research provides a rigorous mathematical framework for the 5-UPS/PRPU redundant parallel manipulator. By confirming the system's 5 DOF and establishing complete dynamic equations, the study lays the theoretical groundwork for future force optimization and real-time control systems. While the current work is theoretical, it sets the stage for empirical validation and the development of high-performance robotic controllers.
Summary updated