Abstract
Terahertz (THz) band communication, ranging from 0.1 THz to 10 THz, is envisioned as a key enabling technology for next-generation networks and future applications such as inter-satellite communications and environmental sensing. The surging number of space debris in Low Earth Orbit poses a big threat to orbital infrastructure and the development of the space economy. In particular, despite the ability to detect and track large-scale space debris, millions of space debris with a radius within the range of 0.1-10 cm and velocity exceeding 1 km/s remains hard to detect with conventional ground-based radars and optical telescopes. In this study, a dual-functional frequency modulated continuous waveform (FMCW) operating in the THz band is adopted for space debris sensing and inter-satellite communications. Specifically, the radar cross section of space debris with various sizes in the THz band is analyzed to demonstrate the feasibility of THz space debris detection. A joint space debris detection and inter-satellite communications based on the FMCW waveform is derived. Then, the parameter estimation and demodulation algorithms are illustrated. Extensive simulations demonstrate that the proposed method can realize high-accuracy parameter estimation of hypervelocity space debris while achieving high reliability for inter-satellite communications.
Introduction
Low Earth Orbit (LEO) is increasingly congested with space debris. While large objects are tracked, millions of fragments between 0.1 and 10 cm in size—traveling at hypervelocities exceeding 1 km/s—remain "invisible" to current ground-based radar and optical systems. These small objects possess enough kinetic energy to cause catastrophic damage to satellites.
This research proposes leveraging the Terahertz (THz) band (0.1–10 THz) for detection. The sub-millimeter wavelengths of THz signals interact more strongly with small debris, yielding a higher Radar Cross Section (RCS) compared to traditional microwave frequencies. To optimize satellite payload, the authors integrate this sensing capability into existing inter-satellite communication (ISL) systems using a dual-functional waveform.
Methods
The proposed system utilizes a specialized Dual-Functional FMCW Waveform to handle the unique challenges of the space environment.
Triangular Chirp Design
Standard linear up-chirps suffer from accuracy degradation at hypervelocities due to Doppler-induced quadratic phase terms. This system employs a triangular waveform (up-chirp followed by a down-chirp). By analyzing the beat frequencies from both segments, the system can mathematically decouple the target's distance from its velocity, effectively neutralizing errors from extreme speeds.
Modeling and Encoding
The study employs NASA’s Size Estimation Model (SEM) to characterize the RCS of debris across different scattering regimes (Rayleigh to geometric). For communication, data is encoded by modulating the chirp's orientation: an "up-down" sequence represents a binary '0', and a "down-up" sequence represents a '1'. A "dechirp" operation at the receiver allows high-bandwidth (1.5 GHz) THz signals to be processed by low-speed, power-efficient Analog-to-Digital Converters (ADCs).
Results and Discussion
Simulations demonstrate that the THz-based system provides exceptional sensing precision and communication reliability.
Sensing Performance
As shown in the performance analysis, the system achieves centimeter-level distance accuracy. For objects traveling at 7 km/s, speed estimation errors remain below 15 m/s. Even at extreme velocities of 15 km/s, the distance error is kept under 0.15 m at sufficient SNR levels.
Communication Reliability
The system maintains a Bit Error Rate (BER) of $10^{-4}$ at an SNR as low as -38 dB. This high sensitivity allows for long-range operation with minimal transmit power, which is critical for small satellite platforms like CubeSats. Data rates range from 50 kbps for basic telemetry to 1.5 Mbps through parameter tuning.
Conclusion
This dual-functional THz waveform offers a promising solution for protecting space infrastructure while enabling high-speed inter-satellite links. Future work will address multi-target resolution in debris clouds and the impact of irregular debris shapes on RCS fluctuations. Experimental verification with 340 GHz hardware prototypes is the next planned step.
Summary updated