Doped Metasurfaces: Optical Metasurfaces without Etched Structure based on Regular Spatially-doped Semiconductor and Compatible with General Functional Optical Films

Ke Jin, Ying Ding, Cheng Lü, Wei ZhengResearch 2021 · DOI

Abstract

Traditional metasurfaces rely on etched nanostructures that present significant fabrication challenges and incompatibility with standard optical coatings. This paper proposes "doped metasurfaces"—a novel approach using spatially-doped semiconductor thin films to achieve phase modulation without physical etching. By maintaining a smooth surface, these devices allow for the integration of functional thin films, such as anti-reflection (AR) coatings. Simulations of a mid-infrared (MIR) metalens demonstrate a transmittance of 90% and a focusing efficiency of 82.2%, offering a promising path for high-performance, manufacturable flat optics.

Introduction

Metasurfaces have emerged as a transformative technology for light manipulation, enabling ultra-thin optical components like flat lenses and holograms. However, most current designs utilize metal or dielectric nanostructures created through etching processes. In the mid-infrared (MIR) spectrum, these structures often require high aspect ratios, making precise fabrication difficult. Furthermore, the resulting "bumpy" topography prevents the application of standard optical thin films, leading to substantial reflection losses at the material interface.

The Doped Metasurface Concept

To overcome these limitations, we introduce the concept of doped metasurfaces. Instead of removing material to create sub-wavelength units, we propose modulating the local carrier concentration within a semiconductor film (specifically Sn-doped $In_2O_3$ on a Silicon substrate) via techniques like plasma implantation.

Schematic of the doped metasurface architecture and its optical performance compared to traditional etched structures.

This approach utilizes the Drude model to calculate the dielectric function of the semiconductor based on doping levels. By varying the azimuthal angle of these doped regions, the phase of incident light can be precisely controlled. A key theoretical insight is that the phase shift is primarily driven by the upper and lower interfaces of the doped layer, making the device's performance robust against variations in layer thickness and removing the need for deep, high-aspect-ratio structures.

Design and Simulation

The effectiveness of this strategy was validated through Finite-Difference Time-Domain (FDTD) simulations of a metalens designed for the 3.5–5.5 $\mu m$ MIR range. Because the metasurface remains physically flat, a multi-layer AR coating consisting of $ZnS$ and $SiO_2$ was integrated into the design using the characteristic matrix method. This hybrid approach combines the phase-modulation power of metasurfaces with the efficiency-boosting power of traditional thin-film optics.

Results and Discussion

The simulation results highlight the significant advantages of the doped architecture:

  • Enhanced Transmittance: The AR-coated doped metasurface achieved a transmittance of approximately 90%, representing an average 35% improvement over uncoated versions.
  • High Focusing Efficiency: The metalens reached a peak focusing efficiency of 82.2%, a 27% increase compared to the non-coated baseline.
  • Structural Robustness: Unlike traditional dielectric metasurfaces that require specific heights for resonance, the doped metasurface maintains stable focal lengths across different thicknesses, simplifying design and manufacturing constraints.

Conclusion

Doped metasurfaces provide a new paradigm for flat optics by reconciling the phase-modulation capabilities of metasurfaces with the efficiency-boosting benefits of traditional thin-film technology. While currently simulation-based, this approach offers a clear roadmap for developing high-efficiency MIR devices that are compatible with standard semiconductor manufacturing processes. Future work will focus on the experimental realization of these structures, specifically addressing the precision of spatial doping boundaries and lateral diffusion.

Summary updated

Abstract

Abstract As a new-type artificial two-dimensional planar array structure, metasurfaces can achieve the modulation of light field through a reasonable design and arrangement of sub-wavelength nano-structure units, which is expected to surpass conventional optical components theoretically. However, the metal or dielectric metasurfaces fabricated by etching process are often trapped in the problems including low focusing efficiency and difficult preparation, which greatly hinders their practical implementation. Here, an idea of “Doped metasurfaces” based on a spatial and regular doping of semiconductor thin films is proposed for the first time. This kind of metasurfaces without etched structure owns smooth and flat surface, allowing the addition of optical functional films like anti-reflection film, which thus gets their optical properties greatly improved and enriched on the basis of meta-structured focusing characteristics. In order to verify the effectiveness of this strategy, we simulate a doped metalens suitable for wide mid-infrared (MIR) range and design an anti-reflection film on it. It is shown that this designed MIR metalens possesses wide operating range, high transmittance and high focusing efficiency. The method proposed here provides a new idea or perspective for constructing metasurfaces devices compatible with traditional optical thin films.
BibTeX
@inproceedings{jin2021doped,
  author = {Ke Jin and Ying Ding and Cheng Lü and Wei Zheng},
  title = {{Doped Metasurfaces: Optical Metasurfaces without Etched Structure based on Regular Spatially-doped Semiconductor and Compatible with General Functional Optical Films}},
  booktitle = {Research},
  year = {2021},
  doi = {10.21203/rs.3.rs-376961/v1},
}

Loading related content...

Figure