Distributed Practical Prescribed-Time Secondary Control of Microgrid under Event-Triggered Communication

Hao He, Yu Zhou, Guanghui Jiang, Leimin WangJournal of Nonlinear Dynamics and Applications 2025 · DOI

TL;DR

This paper introduces a novel distributed control strategy for microgrids that allows operators to "set the clock" on stability, ensuring frequency and voltage reach their targets within a user-defined, prescribed time. By combining a Time Base Generator (TBG) with a dynamic event-triggered communication mechanism, the system achieves rapid synchronization while significantly reducing the data traffic required between distributed generators.

What Problem Does This Paper Address?

Microgrids—small-scale power grids that can operate independently—rely on Distributed Generators (DGs) like solar panels and wind turbines. Because these sources lack the heavy rotating mass (inertia) of traditional power plants, they are prone to rapid frequency and voltage fluctuations.

To fix this, engineers use "secondary control" to restore the grid to its nominal values. Existing control methods usually fall into three categories:

  1. Asymptotic: Convergence is theoretically infinite.
  2. Finite-time: Convergence happens in a limited time, but that time depends on the initial state of the grid.
  3. Fixed-time: Convergence happens within a bound, but calculating that bound is complex and often conservative.

The authors tackle the challenge of Prescribed-Time Control: allowing a grid designer to pre-define an exact settling time (e.g., "stabilize in exactly 10 seconds") regardless of the initial conditions, all while minimizing the communication burden on the network.

Methods

The researchers modeled the microgrid as a Multi-Agent System (MAS), where each DG is an "agent" that talks to its neighbors. Their approach relies on two key pillars:

  • Time Base Generator (TBG): They utilize a specific function, $k(t)$, that acts as a scaling factor for the control gain. As the system approaches the prescribed time ($t_p$), the TBG ensures the control effort is sufficient to eliminate errors. Unlike previous "infinite gain" controllers that can break hardware, this design keeps the control signals bounded and smooth.
  • Dynamic Event-Triggered Mechanism (ETM): Instead of DGs broadcasting their status at fixed intervals (which wastes bandwidth), they only communicate when their local "measurement error" exceeds a specific threshold. Crucially, this threshold is dynamic—it evolves according to the TBG, making communication updates sparser as the system stabilizes.

The authors used Lyapunov stability theory to prove that the system is "practically stable" (meaning errors stay within a tiny, acceptable range) and mathematically demonstrated the exclusion of Zeno behavior (a failure state where the system triggers infinite communication events in a finite time).

Datasets

The paper does not use a real-world dataset. Instead, it validates the theory using a standardized microgrid test system model consisting of:

  • Four Distributed Generators (DGs).
  • Four transmission lines.
  • A communication topology represented by a Laplacian matrix.
  • Simulated load variations to test robustness.

Key Insights and Ideas

  • Independence from Initial States: The most powerful "aha" moment is that the convergence time is a design parameter, not a result of the system's starting state. Whether the grid is slightly off or in total chaos, it hits the target at the same prescribed time.
  • Sparser Triggers via TBG: Traditional event-triggered systems often struggle as they get closer to the target, sometimes triggering more frequently. By tying the trigger threshold to the TBG, the authors achieved "sparser" communication events exactly when the system is most stable.
  • Avoiding the Singularity: Many prescribed-time controllers suffer from mathematical singularities at the deadline ($t = t_p$). The authors solved this by introducing a small constant ($\sigma$) in the TBG denominator, ensuring the controller remains well-behaved even at the exact moment of convergence.

Key Results

  • Precision Timing: In simulations with a prescribed time of $t_p = 10s$, the frequency and voltage of all four DGs converged to the reference values (314.16 rad/s and 380V) precisely at the 10-second mark.
  • Communication Efficiency: Compared to existing fixed-time algorithms, the proposed method showed significantly longer intervals between communication triggers.
  • Robustness: The controller successfully handled "Phase 3" of the simulation, where a load was suddenly disconnected at $t = 10s$. The system exhibited brief fluctuations but quickly readjusted to the reference signals, proving it can handle real-world grid disturbances.

Limitations and Future Work

While the theoretical framework is robust, the paper notes a few areas for further exploration:

  • Simulation vs. Reality: The study is entirely simulation-based. Real-world factors like sensor noise, actuator delays, and physical hardware limits on "control effort" might affect the choice of the prescribed time $t_p$.
  • Optimization: The current work focuses on stability. The authors suggest that future research should integrate power optimization (e.g., ensuring the most cost-effective DG provides the most power) into this prescribed-time framework.
  • Complex Topologies: The test was performed on a relatively simple 4-DG setup; testing on larger, more complex "mesh" networks would be a logical next step.

Summary updated

Abstract

With the increasing integration of distributed generation into the grid, the secondary control of microgrids has become a prominent research focus in this field. However, distributed secondary control in microgrids is subject to constraints from external factors, necessitating both rapid response speed and a reliable communication network. This paper proposes a distributed practical prescribed-time secondary control method aimed at achieving microgrid stability. A key feature of this approach is that the convergence time can be predefined and remains independent of both design parameters and initial conditions. Furthermore, an event-triggered communication strategy is adopted to enhance the efficiency of communication resource utilization within the microgrid. The criterion for achieving practical prescribed-time consensus in the microgrid is established using Lyapunov stability theory. Moreover, the proposed distributed secondary control method is proven to exclude Zeno behavior. Finally, the effectiveness and superiority of the proposed method are demonstrated through case analyses and simulation results.
BibTeX
@article{he2025distributed,
  author = {Hao He and Yu Zhou and Guanghui Jiang and Leimin Wang},
  title = {{Distributed Practical Prescribed-Time Secondary Control of Microgrid under Event-Triggered Communication}},
  journal = {Journal of Nonlinear Dynamics and Applications},
  year = {2025},
  doi = {10.62762/jnda.2025.939275},
}
Figure