TL;DR
This paper explores the use of distributed fiber-optic sensing (DFOS) with Optical Frequency Domain Reflectometry (OFDR) to monitor the strain and damage in an innovative reinforced concrete (RC) beam-column connection. The study demonstrates DFOS's ability to provide high-resolution strain data, offering new insights into the connection's mechanical behavior and potential for structural health monitoring, even under significant damage.
What Problem Does This Paper Address?
Evaluating structural damage after events like earthquakes is crucial for urban resilience, but current methods often rely on subjective engineer judgment, which is time-consuming and expensive. While various sensing technologies exist, distributed fiber-optic sensing (DFOS) offers a promising avenue for detailed, continuous monitoring. However, its application in RC structures, particularly understanding the influence of fiber-optic cable placement, coating, and performance under large strains and damage, requires further investigation. This paper specifically addresses the need for high-resolution strain measurement in innovative RC beam-column connections to better understand damage mechanisms and explore DFOS's potential for quantitative damage assessment.
Methods
The core of this research involves an experimental investigation of a novel reinforced concrete (RC) beam-column connection featuring a partial slot joint designed to control damage. Fiber-optic cables were embedded within the specimen in several ways:
- In concrete: Two types of cables with different coatings (PVC and Silicon-PFA) were attached to stirrups.
- In rebar: A polyimide-coated fiber was epoxied into a groove in the longitudinal rebar.
The specimen was subjected to quasi-static cyclic loading. The performance of the DFOS system was evaluated by comparing its readings with traditional methods like Digital Image Correlation (DIC), strain gauges, and Linear Variable Differential Transformers (LVDTs). The study also specifically investigated:
- The influence of fiber-optic cable coating and placement on strain measurements.
- The performance of DFOS under increasing levels of strain and damage, including cable rupture.
- The development of damage indices based on DFOS data for structural evaluation.
- The use of 2D interpolation to reconstruct data lost due to cable damage.
Datasets
The study utilizes data collected from a laboratory experiment on a specially designed reinforced concrete beam-column connection specimen. This experimental dataset, which includes strain measurements from DFOS, DIC, strain gauges, and LVDTs under cyclic loading, is made publicly available. No pre-existing datasets were used for training or evaluation.
Key Insights and Ideas
- High-resolution strain mapping: DFOS, particularly OFDR, provides unprecedented spatial resolution (1 mm), revealing detailed strain distributions along the beam and column that are not visible with traditional methods like DIC at low drift levels.
- Understanding innovative connection behavior: The study clearly illustrates how the slotted joint and unbonded rebar in the innovative connection influence strain localization and damage progression, offering valuable insights into its mechanical response.
- Cable coating and placement matter: The type of fiber-optic cable coating and its placement (in concrete vs. rebar) significantly impact the strain readings and the cable's survivability under high strains and damage. The Silicon-PFA cable generally showed better performance and survivability.
- Damage quantification potential: The research proposes novel damage indices derived from DFOS strain data (integration of strain, absolute integration, and plastic hinge length approximation) that show promising correlations with maximum and residual drifts, suggesting DFOS's utility for post-earthquake structural evaluation.
- Data reconstruction is feasible: Interpolation techniques can effectively fill gaps in DFOS data caused by cable damage, allowing for more comprehensive analysis even after significant structural events.
Key Results
- At a drift level of ±0.14%, DFOS clearly showed deformation profiles, while DIC showed no visible damage.
- The study observed asymmetric strain distributions on the left and right sides of the beam, consistent with the influence of the slotted joint and unbonded rebar.
- The PVC-coated cable experienced damage and data loss at a drift level of ±1.76%, while the Silicon-PFA cable maintained some functionality, demonstrating its higher survivability.
- The proposed "absolute integration" damage index showed a positive correlation with residual drift, indicating its potential for evaluating damage after an earthquake.
- DFOS accurately measured slot opening and closing up to moderate damage levels, with accuracy decreasing as cable damage increased.
Limitations and Future Work
- Cable survivability: While DFOS offers high resolution, the survivability of fiber-optic cables, especially those embedded in concrete, is a significant limitation under large strains and severe damage, leading to data loss. The PVC cable broke at ±1.76% drift.
- Influence of cable damage on readings: When cables are damaged (e.g., buckling, debonding), the strain readings can become less reliable or even invalid, requiring careful interpretation and data reconstruction.
- Limited scope of damage indices: The proposed damage indices are preliminary and require further validation with a wider range of structural elements and damage scenarios.
- Future Work: The authors suggest further investigation into the survivability of different cable types and coatings, optimizing cable placement strategies, and expanding the validation of damage indices for more robust structural health monitoring applications. They also highlight the need for more advanced DFOS systems with higher sampling rates for real-time monitoring during seismic events.
Summary updated