Dislocation dynamics formulation for self-climb of dislocation loops by vacancy pipe diffusion

Xiaohua Niu, Yejun Gu, Yang XiangInternational Journal of Plasticity 2019 · DOI · arXiv

Abstract

This paper presents a significant advancement in the simulation of defect movement in crystalline materials by introducing a new Discrete Dislocation Dynamics (DDD) formulation for dislocation self-climb. Driven by vacancy pipe diffusion, this mechanism allows dislocation loops to move and evolve much faster than previously predicted by bulk diffusion models. By upscaling a stochastic jog dynamics model to a continuum line representation, the authors develop a framework that accommodates arbitrary loop geometries while strictly preserving the loop's enclosed area (conservative motion). The model is validated against experimental benchmarks in BCC iron and zinc, confirming that self-climb is orders of magnitude faster than bulk-assisted climb and providing a robust tool for large-scale material simulations.

Introduction

In the study of materials science, dislocations are line defects that fundamentally govern plastic deformation. These defects typically move through two primary mechanisms: "gliding," which occurs relatively easily along slip planes, and "climbing," which is a more difficult process involving the movement of the dislocation line perpendicular to its slip plane. Traditionally, climb was thought to require vacancies to diffuse through the "bulk" of the crystal—a slow, non-conservative process that causes dislocation loops to shrink and eventually disappear over long timescales.

However, experimental observations have long pointed toward a different behavior known as conservative self-climb. In this process, vacancies move along the "pipe" of the dislocation line itself rather than through the bulk. This localized diffusion allows loops to translate, rotate, and coalesce without changing their total area. Despite its importance, the field previously lacked a general mathematical framework to implement this behavior in large-scale Discrete Dislocation Dynamics (DDD) simulations. Existing models were often restricted to simple, rigid circular shapes or failed to maintain the conservative nature of the motion in a general setting.

Methods

The authors address these limitations by deriving a model that upscales a stochastic "jog dynamics" model from the atomistic scale to a continuum line representation.

The core of the formulation is the definition of the self-climb velocity ($v_{cl}^{(p)}$) as a second-order derivative of the vacancy concentration along the dislocation's arclength. This concentration is determined by the local climb force (the Peach-Koehler force), which influences vacancy distribution exponentially.

Schematic representation of the jog dynamics model on a dislocation line, showing vacancy concentration and the governing diffusion equation.

As shown in the figure above, the model considers the diffusion of vacancies between jogs on the dislocation line. The governing equation $D_c c_{zz}^c - \frac{1}{\tau_e} c^c + F(z) = 0$ describes the steady-state concentration, while the jog velocity $v_{jog}^{(m)}$ is determined by the flux of vacancies arriving at the jog.

For numerical implementation, the authors utilize a finite difference scheme within a DDD framework. The dislocation is discretized into nodes and segments, where the velocity of each node is calculated based on the local curvature and the surrounding stress state. This innovation represents the first DDD-level formulation that naturally enforces area conservation for any loop shape while remaining computationally efficient enough for multi-dislocation simulations.

Key Results and Validation

The model was validated against several material parameters and experimental benchmarks, specifically focusing on BCC Iron (Fe) at 750K and Zinc (Zn).

  • Coalescence Validation: Simulations of two interstitial loops in iron showed them coalescing in approximately 4.1 seconds at 750K. This result is in excellent agreement with experimental TEM and atomistic estimates, which range from 7.5 to 30 seconds. Crucially, this is far more accurate than traditional bulk models, which would predict timescales six orders of magnitude longer.
  • Rigid-Body Recovery: To ensure mathematical consistency, the authors demonstrated that their model reduces to classical analytical formulas for rigid circular loops when stress gradients are small.
  • Experimental Match: The simulation of a loop being "pushed" by a gliding edge dislocation perfectly mimicked the qualitative behaviors recorded in the 1961 Kroupa-Prince experiments on Zinc.

Insights and Discussion

A major "aha moment" of this research is the quantification of the "speed gap" between self-climb and bulk diffusion. For 10nm loops in iron, self-climb leads to coalescence in seconds, whereas bulk-diffusion-assisted climb would take years.

Furthermore, the authors provide a mathematical proof that area conservation is an inherent property of their formulation. Because the velocity is defined as a second-order derivative integrated over a closed loop, the rate of change of the area is mathematically zero. This confirms the "conservative" nature of the motion for any arbitrary loop shape.

The study also highlights that "shape matters." While small, isolated loops tend to remain circular to minimize self-stress, interacting loops or those subjected to high stress gradients deviate significantly from circularity. For instance, when a loop interacts with a straight edge dislocation, it undergoes a complex "zigzag" motion, gliding and climbing toward stable lines in a non-linear path because no single point is stable for both motions simultaneously.

Conclusion and Future Work

While this formulation marks a significant step forward, it is not without limitations. The accuracy of the second-order derivative is sensitive to discretization; the authors found that 40–60 segments per loop were necessary, which could become computationally expensive in systems containing millions of loops.

Future research will aim to more deeply integrate the coupling between irradiation (which generates vacancies) and the elastic effects that drive diffusion. Additionally, investigating the influence of rapidly moving dislocations on the vacancy "pipe" flux remains a key area for further exploration.

Summary updated

BibTeX
@article{niu2019dislocation,
  author = {Xiaohua Niu and Yejun Gu and Yang Xiang},
  title = {{Dislocation dynamics formulation for self-climb of dislocation loops by vacancy pipe diffusion}},
  journal = {International Journal of Plasticity},
  year = {2019},
  doi = {10.1016/j.ijplas.2019.05.002},
}

Loading related content...

Figure