Directed Energy Transfer from Monolayer WS2 to Near-Infrared Emitting PbS–CdS Quantum Dots

Arelo Tanoh, Nicolas Gauriot, Géraud Delport, James Xiao, Raj Pandya, Jooyoung Sung, Jesse R. Allardice, Zhaojun Li, Cyan A. Williams, A. R. Baldwin, Samuel D. Stranks, Akshay RaoACS 2020 · DOI

TL;DR

This paper demonstrates efficient energy transfer from a 2D material (monolayer WS₂) to 0D quantum dots (PbS-CdS), enabling the WS₂ to act as an "antenna" for downshifting light emission. This work establishes a new pathway for controlling optoelectronic properties and opens doors for applications in light-harvesting and advanced optical computing.

What Problem Does This Paper Address?

Two-dimensional (2D) materials like transition metal dichalcogenides (TMDs) and zero-dimensional (0D) quantum dots (QDs) are promising building blocks for next-generation optoelectronic devices. While much research has focused on energy or charge transfer from QDs to TMDs (0D → 2D), there's a significant gap in understanding and utilizing the reverse process: energy transfer from 2D materials to QDs (2D → 0D). This latter pathway is particularly interesting because 2D TMDs can absorb light efficiently across a broad spectrum, acting as excellent light-harvesting antennas. However, their intrinsic photoluminescence (PL) can be limited by defects and trap states. QDs, on the other hand, offer tunable, high-efficiency emission. The challenge is to effectively couple these two material types to leverage the strengths of each, specifically using the 2D material as an antenna to excite the QD emitter.

Methods

The researchers fabricated heterostructures by spin-coating a 1,3-benzenedithiol (BDT) linker layer onto exfoliated monolayer tungsten disulfide (WS₂) on a glass substrate, followed by spin-coating lead sulfide-cadmium sulfide (PbS-CdS) quantum dots (QDs).

Key characterization techniques included:

  • Photoluminescence (PL) Spectroscopy: To analyze the light emitted by the materials and their heterostructures.
  • Photoluminescence Excitation (PLE) Microscopy: To probe which wavelengths of excitation light lead to QD emission, revealing the energy transfer pathways. This was crucial for identifying the contribution of WS₂ to QD emission.
  • Time-Resolved Photoluminescence (TRPL) Microscopy: To study the dynamics of exciton decay and energy transfer on ultrafast timescales, allowing researchers to determine if energy transfer is faster than intrinsic loss mechanisms in WS₂.
  • Confocal PL Microscopy: To map the spatial distribution of QD emission across the WS₂ flake, highlighting areas of enhanced emission.

Datasets

Not discussed in the paper. The study relies on experimental measurements of synthesized materials.

Key Insights and Ideas

  • WS₂ as an Efficient Antenna: Monolayer WS₂ effectively absorbs visible light and transfers this energy to PbS-CdS QDs, acting as a broadband antenna.
  • 2D → 0D Energy Transfer is Viable: The study demonstrates that energy transfer from a 2D material to 0D QDs is a significant and controllable process.
  • Tunable Emission via QDs: By coupling WS₂ with PbS-CdS QDs, the emission wavelength can be downshifted to the near-infrared (NIR) region, offering tunability not easily achieved with WS₂ alone.
  • Energy Transfer Outcompetes Loss: The time-resolved measurements show that the energy transfer from WS₂ to QDs is faster than the intrinsic exciton trapping and loss mechanisms within the WS₂ monolayer, ensuring efficient energy funneling.
  • FRET Dominance: While both Förster Resonance Energy Transfer (FRET) and Dexter Energy Transfer (DET) are considered, the large oscillator strengths of WS₂ and PbS-CdS QDs, along with the estimated Förster radius, strongly suggest FRET as the dominant mechanism. The presence of the CdS shell on the QDs also supports FRET over DET.

Key Results

  • 58% QD PL Contribution: Photoluminescence excitation studies revealed that 58% of the observed QD photoluminescence originates from energy transfer from the monolayer WS₂.
  • QD PL Enhancement and Blue Shift: In the heterostructure, QD PL was enhanced by a factor of 5.2x and showed a blue shift compared to QDs on a bare substrate. This enhancement is attributed to energy funneling from WS₂.
  • Ultrafast Energy Transfer: Time-resolved PL measurements indicated that the energy transfer process occurs on a timescale faster than the instrument's resolution, outcompeting intrinsic exciton trapping in WS₂ (which occurs on the order of picoseconds).
  • WS₂ PL Quenching: The fast component of the WS₂ PL decay was significantly quenched in the heterostructure, confirming the efficient transfer of excitons to the QDs.

Limitations and Future Work

  • Instrumental Limitations: The ultrafast energy transfer was too fast to be precisely resolved by the time-resolved photoluminescence setup, which was limited to picosecond resolution. This prevented direct observation of the QD PL lifetime increase due to energy transfer.
  • Understanding X₂ Quenching: While overall QD PL is enhanced, the specific quenching behavior of different excitonic species (NE vs. X₂) in WS₂ suggests additional complex pathways that warrant further investigation.
  • Saturation Effects: At high excitation intensities, the energy transfer pathway can become saturated, indicating that the capacity of the QDs to accept energy is finite.
  • Future Directions: The authors suggest using more sensitive techniques like femtosecond transient absorption and higher-resolution TRPL to probe nonradiative loss mechanisms. They also propose passivating trap states in TMDs to further enhance energy transfer and isolate loss pathways. The demonstrated TMD-QD heterostructures hold promise for applications in light-emitting devices (displays, lighting, lasers), artificial light-harvesting systems, and optical readout for logic and computing applications.

Summary updated

Abstract

Heterostructures of two-dimensional (2D) transition metal dichalcogenides (TMDs) and inorganic semiconducting zero-dimensional (0D) quantum dots (QDs) offer useful charge and energy transfer pathways, which could form the basis of future optoelectronic devices. To date, most have focused on charge transfer and energy transfer from QDs to TMDs, that is, from 0D to 2D. Here, we present a study of the energy transfer process from a 2D to 0D material, specifically exploring energy transfer from monolayer tungsten disulfide (WS<sub>2</sub>) to near-infrared emitting lead sulfide-cadmium sulfide (PbS-CdS) QDs. The high absorption cross section of WS<sub>2</sub> in the visible region combined with the potentially high photoluminescence (PL) efficiency of PbS QD systems makes this an interesting donor-acceptor system that can effectively use the WS<sub>2</sub> as an antenna and the QD as a tunable emitter, in this case, downshifting the emission energy over hundreds of millielectron volts. We study the energy transfer process using photoluminescence excitation and PL microscopy and show that 58% of the QD PL arises due to energy transfer from the WS<sub>2</sub>. Time-resolved photoluminescence microscopy studies show that the energy transfer process is faster than the intrinsic PL quenching by trap states in the WS<sub>2</sub>, thus allowing for efficient energy transfer. Our results establish that QDs could be used as tunable and high PL efficiency emitters to modify the emission properties of TMDs. Such TMD-QD heterostructures could have applications in light-emitting technologies or artificial light-harvesting systems or be used to read out the state of TMD devices optically in various logic and computing applications.
BibTeX
@inproceedings{tanoh2020directed,
  author = {Arelo Tanoh and Nicolas Gauriot and Géraud Delport and James Xiao and Raj Pandya and Jooyoung Sung and Jesse R. Allardice and Zhaojun Li and Cyan A. Williams and A. R. Baldwin and Samuel D. Stranks and Akshay Rao},
  title = {{Directed Energy Transfer from Monolayer WS<sub>2</sub> to Near-Infrared Emitting PbS–CdS Quantum Dots}},
  booktitle = {ACS},
  year = {2020},
  doi = {10.1021/acsnano.0c05818},
}
Figure