Direct preparation of carbon nanotubes and nanobelts from polymer

Bingan Lu, Xiaosong Guo, Zhong Qiu Bao, Xiaodong Li, Yanxia Liu, Chengquan Zhu, Youqing Wang, Erqing XieNanoscale 2011 · DOI

Abstract

Carbon nanotubes and carbon nanobelts were obtained via single-needle electrospinning on a basis of water-in-oil (W/O) emulsion technique, respectively. The morphology of electrospun products can be controlled by controlling the temperature of the collector during the electrospinning process. The mechanism of fabricating PAN nanotubes and nanobelts by emulsion electrospinning is discussed in detail. Transmission electron microscopy and scanning electron microscope results show that the carbon nanotubes (the inner diameter of 25-50 nm and the outer diameter of 50-100 nm) have a wall thickness of 10-50 nm, and the width and thickness of the nanobelts range from 100 to 300 nm, and 1 to 5 nm, respectively. A slight difference of bonding configuration of the carbon nanofibers, carbon nanotubes and carbon nanobelts is attributed partly to their different topological structures. The novel method is versatile and could be extended to the fabrication of various types of nanotubes and nanobelts.
BibTeX
@inproceedings{lu2011direct,
  author = {Bingan Lu and Xiaosong Guo and Zhong Qiu Bao and Xiaodong Li and Yanxia Liu and Chengquan Zhu and Youqing Wang and Erqing Xie},
  title = {{Direct preparation of carbon nanotubes and nanobelts from polymer}},
  booktitle = {Nanoscale},
  year = {2011},
  doi = {10.1039/c0nr00936a},
}

Loading related content...

Figure