Direct Imaging of Liquid–Nanoparticle Interfaces with Atom Probe Tomography

S. Qiu, Changxi Zheng, Qi Zhou, Dashen Dong, Qianqian Shi, Vivek Garg, Wenlong Cheng, R.k.w. Marceau, Gang Sha, Jing FuThe Journal of Physical Chemistry C 2020 · DOI · arXiv

Abstract

Understanding the structure and chemical composition at the liquid–nanoparticle (NP) interface is crucial for a wide range of physical, chemical, and biological processes. In this study, direct imaging of the liquid–NP interface by atom probe tomography (APT) is reported for the first time, which reveals the distributions and the interactions of key atoms and molecules in this critical domain. The APT specimen is prepared by controlled graphene encapsulation of the solution containing nanoparticles on a metal tip, with an end radius in the range of 50 nm to allow field evaporation. Using gold nanoparticles (AuNPs) in suspension as an example, analysis of the mass spectrum and three-dimensional (3D) chemical maps from APT provides a detailed image of the water–gold interface at near-atomic resolution. A locally dense region of Au+ ions has been reconstructed, representing a portion of an individual AuNP. A large number of water-related ions have also been identified, confirming the AuNP in the hydrated state. At the water–gold interface, a trisodium citrate layer has been observed based on Na+ and C-containing ions.

Introduction

The interface between a liquid and a nanoparticle (NP) is the primary site for critical electrochemical and biological reactions, from battery charging to drug delivery. Despite its importance, characterizing this interface at the atomic level has been a long-standing challenge. Traditional electron microscopy techniques often require high-vacuum environments that cause liquids to evaporate, while cryogenic methods frequently lack the 3D chemical resolution needed to distinguish individual molecular species. This study overcomes these barriers by utilizing graphene encapsulation and Atom Probe Tomography (APT) to provide the first 3D, atom-by-atom dissection of the liquid–nanoparticle interface.

Methodology

To preserve the liquid environment for analysis, the researchers developed a novel preparation method involving graphene encapsulation. A single layer of graphene was used to "shrink-wrap" a solution of gold nanoparticles (AuNPs) onto a pre-sharpened tungsten tip. This graphene layer acts as a miniaturized pressure vessel, maintaining the liquid's integrity within the instrument's vacuum.

Overview of the APT experimental setup, mass spectra, 3D reconstruction, and interface density analysis.

The specimen was then frozen and analyzed using Laser-Assisted Atom Probe Tomography. Ultra-short laser pulses triggered the field evaporation of atoms and molecules (such as $\text{H}_2\text{O}^+$, $\text{Na}^+$, and $\text{Au}^+$) from the tip. By measuring the time-of-flight and the impact position of these ions on a detector, the team reconstructed the original 3D chemical identity and position of every atom with a lateral resolution of approximately 0.3 nm.

Key Insights and Results

Visualizing the Electrical Double Layer (EDL)

The most significant achievement of this work is the direct observation of the Electrical Double Layer (EDL). The APT data revealed a structured region of water molecules and ions surrounding the charged AuNP. Analysis showed that the water density at the interface is not uniform; instead, it forms distinct layers with varying densities.

Detailed schematic and density profile of the gold-water interface, highlighting the structured layers of the electrical double layer.

The Citrate Stabilizer and Bulk Water

Gold nanoparticles are typically stabilized by trisodium citrate to prevent aggregation. The researchers successfully mapped this citrate layer by identifying $\text{Na}^+$ and carbon-containing ions (like $\text{COO}^+$), finding it to be roughly 1 nm thick. Furthermore, the bulk water region exhibited a density of 0.95 $\text{g/cm}^3$, suggesting that the graphene encapsulation may exert significant pressure, potentially creating a high-pressure ice phase within the tip.

Summary of Findings

  • EDL Thickness: The overall thickness of the structured water-based EDL was measured at approximately 1.8 nm.
  • Chemical Mapping: The study produced the first 3D maps showing the transition from the gold core, through the citrate stabilizer, and into the bulk water.
  • Resolution: The technique achieved near-atomic resolution, allowing for a detailed chemical dissection of the interface.

Limitations and Future Outlook

While this study represents a major leap forward, the authors note that differences in evaporation field strengths between gold and ice can lead to "trajectory aberrations," causing a slight blurring (approx. 0.5 nm) at the interface. Additionally, the graphene encapsulation process requires precise control to maintain tip sharpness.

Future applications of this technique could include studying functionalized nanoparticles for targeted medicine or exploring the behavior of water under extreme confinement in various chemical environments. This work opens a new window into the atomic-scale dynamics of liquid-solid interfaces.

Summary updated

Abstract

Understanding the structure and chemical composition at the liquid–nanoparticle (NP) interface is crucial for a wide range of physical, chemical, and biological processes. In this study, direct imaging of the liquid–NP interface by atom probe tomography (APT) is reported for the first time, which reveals the distributions and the interactions of key atoms and molecules in this critical domain. The APT specimen is prepared by controlled graphene encapsulation of the solution containing nanoparticles on a metal tip, with an end radius in the range of 50 nm to allow field evaporation. Using gold nanoparticles (AuNPs) in suspension as an example, analysis of the mass spectrum and three-dimensional (3D) chemical maps from APT provides a detailed image of the water–gold interface at near-atomic resolution. A locally dense region of Au+ ions has been reconstructed, representing a portion of an individual AuNP. A large number of water-related ions have also been identified, confirming the AuNP in the hydrated state. At the water–gold interface, a trisodium citrate layer has been observed based on Na+ and C-containing ions.
BibTeX
@article{qiu2020direct,
  author = {S. Qiu and Changxi Zheng and Qi Zhou and Dashen Dong and Qianqian Shi and Vivek Garg and Wenlong Cheng and R.K.W. Marceau and Gang Sha and Jing Fu},
  title = {{Direct Imaging of Liquid–Nanoparticle Interfaces with Atom Probe Tomography}},
  journal = {The Journal of Physical Chemistry C},
  year = {2020},
  doi = {10.1021/acs.jpcc.0c05504},
}
Figure