Direct current remote cloak for arbitrary objects

Tianhang Chen, Bin Zheng, Yihao Yang, Lian Shen, Zuojia Wang, Fei Gao, Er‐Ping Li, Yu Luo, Tie Jun Cui, Hongsheng ChenLight 2019 · DOI

Abstract

Hiding an arbitrary object with a cloak at a distance from an object is of great significance in scientific research, but remains unrealized as a practical device. In this paper, we propose the first experimental realization of a remote cloaking device that makes any object located at a certain distance invisible at direct current (DC) frequency. A negative resistor network with active elements is used to achieve the remote function of the DC cloak. Based on this network, the cloak can remotely generate a hidden region without distorting the currents far from the cloaked region. The experimental results show that any object in the hidden region is invisible to a DC detector. Our cloak does not require any knowledge of the hidden object. The experimental demonstration shows the superiority of this remote cloaking device, which may find potential applications in medical or geologic research.

Introduction

In the field of transformation optics, most "cloaks" are internal—they must physically enclose the object they are hiding. While "remote cloaking" (hiding an object at a distance) has been theorized, previous versions were limited to the "anti-object" concept, which only works if you know the exact shape and material properties of the object beforehand.

Schematics of two kinds of DC cloaking: (a) Conventional cloaking and (b) remote cloaking.

Hiding an arbitrary object remotely—meaning the cloak doesn't need to know what it's hiding—was previously stuck at the conceptual stage. The mathematical requirement for such a device involves "double-negative" materials (specifically, negative conductivity in a DC context), which do not exist in nature and are notoriously difficult to engineer.

Methods and Design

The authors combined advanced mathematical theory with active electronic circuit design to overcome these physical limitations:

  • Multi-folded Transformation Optics: They used a coordinate transformation method that "folds" space. This creates a virtual region that is electrically "insulated" from the background, even though it remains physically connected.
  • Active Negative Resistor Network: To realize the negative conductivity required by the math, the team built a network using active electronic elements (op-amps and voltage followers). These components allow for a "potential rise" as current traverses the material, effectively mimicking negative resistance.
  • Mesh-Based Design: To make the complex math practical for a physical device, they used a "mesh-based" transformation in Cartesian coordinates. This allowed them to build the cloak on a 60x60 cm Printed Circuit Board (PCB) using a grid of standard resistors and 124 "legs" of active bleeder circuits.

Experimental Validation

As an experimental physics paper, this work validated the design through COMSOL Multiphysics simulations and physical experimental measurements mapping the electric potential across a custom-fabricated resistor grid.

Potential distributions for (a) a square insulator, (b) a circular insulator, and (c) a circular conductor in the hidden region. Insets show quantitative potential decay matching the background.

Key Results and Insights

  • Object Independence: Because the cloak creates a "hidden region" through space-folding rather than object-specific cancellation, it is truly "object-independent." It can hide a conductor, an insulator, or a complex shape without any adjustments to the cloak itself.
  • Active vs. Passive: The use of active power sources overcomes the limitations of passive materials. By injecting energy into the system via voltage followers, they simulate the "negative" material properties required by transformation optics.
  • Perfect Potential Restoration: In both simulations and experiments, the electric potential distribution far from the cloak was nearly identical to the uniform background. Measurements showed that the potential curves for all three cloaked objects matched the "no-object" background curve almost perfectly, while "object-only" cases showed massive distortion.

Limitations and Future Work

The current experimental setup uses a manual monitoring system to apply the inverse voltage. For a truly practical device, the system would need to automatically sense the incident field and adjust the active elements in real-time. Additionally, this device works only at direct current (DC). Translating this to electromagnetic waves (like light or radar) remains a challenge due to the requirement for negative refractive indices across a range of frequencies.

The researchers suggest this technology could eventually find use in geologic sensing (hiding underground infrastructure from sensors) or medical applications, such as preventing surgical instruments from interfering with sensitive electrical impedance tomography.

Summary updated

Abstract

Hiding an arbitrary object with a cloak at a distance from an object is of great significance in scientific research, but remains unrealized as a practical device. In this paper, we propose the first experimental realization of a remote cloaking device that makes any object located at a certain distance invisible at direct current (DC) frequency. A negative resistor network with active elements is used to achieve the remote function of the DC cloak. Based on this network, the cloak can remotely generate a hidden region without distorting the currents far from the cloaked region. The experimental results show that any object in the hidden region is invisible to a DC detector. Our cloak does not require any knowledge of the hidden object. The experimental demonstration shows the superiority of this remote cloaking device, which may find potential applications in medical or geologic research.
BibTeX
@inproceedings{chen2019direct,
  author = {Tianhang Chen and Bin Zheng and Yihao Yang and Lian Shen and Zuojia Wang and Fei Gao and Er‐Ping Li and Yu Luo and Tie Jun Cui and Hongsheng Chen},
  title = {{Direct current remote cloak for arbitrary objects}},
  booktitle = {Light},
  year = {2019},
  doi = {10.1038/s41377-019-0141-2},
}
Figure