Difficulty Classification of Mountainbike Downhill Trails utilizing Deep Neural Networks

Stefan Langer, Robert Müller, Kyrill Schmid, Claudia Linnhoff-PopienarXiv 2019 · arXiv

Abstract

Traditional mountain bike trail grading is often subjective, leading to inconsistencies across different regions and trail builders. This research proposes an objective, data-driven approach using deep learning to classify trail difficulty. By capturing motion data from sensors mounted on the rider and the bicycle, a 2D Convolutional Neural Network (CNN) was developed to distinguish between easy, medium, and hard terrain. The model achieved a maximum accuracy of 90.97%, indicating that physical sensor signatures can effectively standardize trail ratings.

Introduction

The grading of mountain bike (MTB) trails—typically ranging from "Green" (easy) to "Black" (expert)—is currently a human-centric process. Factors such as regional topography, individual skill levels, and weather conditions introduce significant subjectivity into these ratings. A "Blue" trail in one park might be significantly more technical than a "Blue" trail elsewhere. This study addresses this inconsistency by treating trail difficulty as a measurable signal processing problem, utilizing accelerometer and gyroscope data to create a computational standard for difficulty.

Methodology

The researchers employed a multi-sensor approach to capture the dynamics of both the rider and the bike.

Hardware and Data Acquisition

Two mbientlab Meta Motion r0.2 sensor units were used: one attached to the rider's helmet and another to the bike's downtube. Each unit recorded 3-axis accelerometer and 3-axis gyroscope data. To process this multi-dimensional time-series data using computer vision techniques, the researchers stacked the data from the four sensors vertically. The three axes (X, Y, Z) were treated as input channels, effectively transforming the motion data into an "image-like" representation.

Model Architecture

The core of the system is a 2D CNN designed to extract spatial-temporal features from the sensor stacks. The architecture consists of three sequential convolutional blocks, each containing a Conv2D layer, batch normalization, ReLU activation, max pooling, and dropout. These layers feed into a fully connected dense layer, culminating in a Softmax output that predicts one of three difficulty classes.

The 2D CNN architecture used for trail classification.

Dataset and Labeling

Data was collected during multiple downhill rides and synchronized with chest-mounted action camera footage for ground-truth labeling. Trails were categorized based on the Singletrail-Skala (S0-S5) into three labels:

  • Label 0 (Easy): Solid surfaces with slight gradients and no switchbacks.
  • Label 1 (Medium): Loose surfaces with small roots, stones, and moderate drops.
  • Label 2 (Hard): Slippery or loose surfaces featuring large roots, high drops, and tight switchbacks.

To handle class imbalance (where "Medium" trails were overrepresented), the researchers applied over-sampling techniques to ensure a balanced training set.

Results and Discussion

The study found that the temporal window size is a critical factor in classification accuracy. Short windows (e.g., 1 second) failed to capture the "rhythm" of the trail, resulting in poor performance. However, as the window size increased to 10 seconds (10,000ms), the model's ability to recognize technical patterns improved significantly.

Classification accuracy across various window and kernel sizes.

The highest accuracy of 90.97% was achieved using a 10-second window and a (60,2) kernel size. Analysis of the confusion matrix revealed that most misclassifications occurred between adjacent difficulty levels (e.g., Easy vs. Medium), reflecting the continuous nature of trail difficulty.

Conclusion

This research demonstrates that deep neural networks can objectively classify MTB trail difficulty using only motion sensors. By moving beyond subjective human assessment, this approach offers a path toward a global, data-driven standard for trail grading. Future work may involve expanding the dataset to include multiple riders and exploring unsupervised learning methods to allow the AI to define difficulty categories autonomously.

Summary updated

Abstract

The difficulty of mountainbike downhill trails is a subjective perception. However, sports-associations and mountainbike park operators attempt to group trails into different levels of difficulty with scales like the Singletrail-Skala (S0-S5) or colored scales (blue, red, black, ...) as proposed by The International Mountain Bicycling Association. Inconsistencies in difficulty grading occur due to the various scales, different people grading the trails, differences in topography, and more. We propose an end-to-end deep learning approach to classify trails into three difficulties easy, medium, and hard by using sensor data. With mbientlab Meta Motion r0.2 sensor units, we record accelerometer- and gyroscope data of one rider on multiple trail segments. A 2D convolutional neural network is trained with a stacked and concatenated representation of the aforementioned data as its input. We run experiments with five different sample- and five different kernel sizes and achieve a maximum Sparse Categorical Accuracy of 0.9097. To the best of our knowledge, this is the first work targeting computational difficulty classification of mountainbike downhill trails.
BibTeX
@misc{langer2019difficulty,
  author = {Stefan Langer and Robert Müller and Kyrill Schmid and Claudia Linnhoff-Popien},
  title = {{Difficulty Classification of Mountainbike Downhill Trails utilizing Deep Neural Networks}},
  year = {2019},
  eprint = {1908.04390},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1908.04390},
}
Figure