Diagnostics of pulse contrast for petawatt laser in SGII
Lists
Only you see this
Abstract
Pulse contrast is an important parameter for ultrafast pulses. It shall be 10<sup>8</sup> or higher in order to avoid effect from noise before main pulse. Diagnostics with cross-correlation can achieve high temporal resolution such as ~7fs. Cross-correlation has advantage in pulse contrast measurement than autocorrelation because it can distinguish noise before or after main pulse. High dynamic range is also essential in pulse contrast measurement. Cross-correlation signal from a single shot is converted into a signal series through fiber array, which can be analyzed by a set of a PMT and an oscilloscope. Noise from nonlinear crystal and scatter needs decrease to improve dynamic range. And pulse power is also discussed in pulse contrast experiments. Time delay τ is generated by travel stage in measurement for repetition pulses. Then energy instability will generate error in this measurement. In measurement for single shot pulse, time delay τ is generated by slant angle of beams. The scanning procession is completed with thousands parts of beam section within a single shot, and error will generated from no uniformity in near field. Performance test of pulse contrast measurement is introduced in subsequent sections. Temporal resolution is testified by self-calibration. Dynamic range is judged by a parallel flat. At last pulse contrast of petawatt laser is diagnosed by a single shot cross-correlator with high confidence. The ratio is 10<sup>-6</sup> at 50ps before main pulse, and 10<sup>-4</sup> at 10ps before main pulse.
BibTeX
@inproceedings{ouyang2015diagnostics,
author = {Xiaoping Ouyang and Daizhong Liu and Baoqiang Zhu and Jian Zhu and Jianqiang Zhu},
title = {{Diagnostics of pulse contrast for petawatt laser in SGII}},
booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
year = {2015},
doi = {10.1117/12.2178692},
}Loading related content...