Development of CdSe-ZnO Flower-Rod Core-Shell Structure Based Photoelectrochemical Biosensor for Detection of Norovirous RNA

Zhizhong Han, Qinghua Weng, Chaofan Lin, Jinquan Yi, Jie KangSensors 2018 · OpenReview

TL;DR

This paper presents a novel photoelectrochemical (PEC) biosensor utilizing CdSe-ZnO flower-rod core-shell structures (CSZFRs) for the sensitive and rapid detection of Norovirus RNA (NV RNA). The CSZFRs enhance visible light absorption and charge separation, leading to a significant increase in photocurrent and a low detection limit of 0.50 nM for NV RNA.

What Problem Does This Paper Address?

Norovirus (NV) is a highly infectious pathogen responsible for widespread gastroenteritis, posing a significant public health challenge. Current detection methods like RT-PCR, while accurate, can be time-consuming, complex, and require specialized handling. There's a need for rapid, sensitive, and user-friendly diagnostic tools. Photoelectrochemical (PEC) biosensors offer a promising alternative due to their high sensitivity, speed, and relatively simple instrumentation. However, traditional semiconductor materials like ZnO have limitations, such as a large bandgap that restricts their response to UV light, hindering efficient solar energy utilization. This paper aims to overcome these limitations by developing a PEC biosensor that leverages the enhanced optical and electronic properties of a composite material for improved NV RNA detection.

Methods

The core of this research lies in the synthesis and application of CdSe-ZnO flower-rod core-shell structures (CSZFRs).

  • CSZFR Synthesis: The researchers employed an ion-exchange method. First, ZnO flower-rods were grown on indium-doped tin oxide (ITO) substrates. These ZnO structures were then immersed in a solution containing selenium ions (formed from Se powder and NaBH4) to create a ZnSe layer. Finally, the ZnSe was converted to CdSe through immersion in a Cd(NO3)2 solution, forming the CdSe-ZnO core-shell structure.
  • Biosensor Construction: The CSZFRs were functionalized with 3-mercaptopropionic acid (MPA) to create carboxylate groups. A DNA probe, designed to be complementary to NV RNA, was then immobilized onto the CSZFR surface via a chemical bond between the amine group of the DNA probe and the carboxyl group of MPA.
  • Detection Mechanism: The biosensor operates on the principle of complementary base pairing. When the target NV RNA is present, it hybridizes with the immobilized DNA probe. This hybridization event, involving insulating biomolecules, hinders electron transfer and leads to a measurable decrease in the photocurrent generated under visible light irradiation.
  • Characterization: Standard techniques were used to characterize the materials, including Field-Emission Scanning Electron Microscopy (FE-SEM) for morphology, X-ray Diffraction (XRD) for crystal structure, and UV-Visible diffuse reflectance spectra and fluorescence spectroscopy to analyze optical properties.
  • Photoelectrochemical Measurements: A conventional three-electrode system with an electrochemical workstation was used to measure photocurrent under visible light irradiation. Electrochemical impedance spectroscopy (EIS) was also employed to understand electron transfer characteristics.

Datasets

Not discussed in the paper. The study focuses on the development and testing of a biosensor using synthesized materials and custom-designed DNA/RNA sequences.

Key Insights and Ideas

  • Synergistic Properties of CSZFRs: The combination of CdSe and ZnO in a core-shell structure is crucial. CdSe quantum dots (QDs) have a narrower bandgap, allowing them to absorb visible light more effectively than pure ZnO. This enhanced visible light absorption, coupled with efficient charge separation facilitated by the band alignment between CdSe and ZnO, significantly boosts the photocurrent.
  • Quenching Mechanism for Detection: The hybridization of NV RNA with the DNA probe acts as an "insulator," impeding the flow of electrons. This steric hindrance and increased resistance lead to a measurable decrease in photocurrent, forming the basis of the detection signal.
  • Improved Sensitivity and Speed: The CSZFR-based biosensor demonstrates a substantial improvement in photocurrent compared to pure ZnO, leading to a lower detection limit and a faster response time, making it suitable for rapid diagnostics.
  • Practical Applicability in Complex Matrices: The successful recovery experiments in diluted human serum highlight the potential of this biosensor for real-world applications, even in the presence of interfering substances.

Key Results

  • Enhanced Photocurrent: Under visible light, the CSZFRs generated a photocurrent of up to 0.1 mA, a significant improvement over pure ZnO FRs, which produced only about 3.0 µA.
  • Linear Detection Range: A linear relationship was observed between the photocurrent and NV RNA concentration in the range of 0–5.10 nM.
  • Low Detection Limit: The biosensor achieved a detection limit of 0.50 nM for NV RNA.
  • High Sensitivity and Selectivity: The linear regression equation was found to be I = 0.03256 – 0.0033c (R² = 0.99, S/N = 3), indicating good linearity and sensitivity. The paper also notes that a PEC biosensor based on pure ZnO showed significantly lower photocurrent and a smaller difference between concentrations, suggesting higher selectivity for the CdSe-ZnO system.
  • Spike Recovery in Serum: In normal human serum, the average recovery rate for NV RNA detection was 101.97%, with relative standard deviations (RSD) as low as 2.29%, demonstrating good applicability in complex biological samples.

Limitations and Future Work

  • Steric Hindrance and Insulation: While the insulating nature of DNA and RNA is key to detection, it also contributes to the decrease in photocurrent. The paper acknowledges that this steric hindrance and insulation effect can inhibit charge transfer.
  • Further Biomolecule Detection: The authors suggest that the developed PEC biosensor, based on CSZFRs, is sensitive and fast, and can be extended for the detection of other biomolecules beyond NV RNA.
  • Optimization of Surface Modification: While MPA was used for surface modification, further research could explore other functionalization strategies to potentially improve probe immobilization efficiency or reduce non-specific binding.
  • Real-World Sample Testing: While serum recovery was tested, further validation with a wider range of clinical samples and under various environmental conditions would be beneficial for full commercialization.

Summary updated

Abstract

In this work, the CdSe–ZnO flower-rod core-shell structure (CSZFRs) was prepared by ion-exchange method. The surface of CSZFRs was modified by 3-mercaptopropionic acid (MPA), and then the DNA probe was immobilized on the surface via chemical bond between -NH2 of DNA probe and -COOH of MPA. Finally, the target norovirous (NV) RNA was combined with the probe according to the principle of complementary base pairing, resulting in a decrease of the photocurrent. The results show that the absorbance spectrum of visible light is enhanced for CSZFRs compared with pure ZnO. Under visible light irradiation, the photocurrent of CSZFRs is up to 0.1 mA, which can improve the sensitivity of the photoelectrochemical (PEC) biosensor. In the measurement range of 0–5.10 nM, the measured concentrations (c) have a good linear relationship with the output photocurrent of the biosensor. The linear regression equation is expressed as I = 0.03256 − 0.0033c (R2 = 0.99, S/N = 3) with a detection limit of 0.50 nM. Therefore, this work realizes a rapid and sensitive method for the detection of NV RNA.
BibTeX
@inproceedings{han2018development,
  author = {Zhizhong Han and Qinghua Weng and Chaofan Lin and Jinquan Yi and Jie Kang},
  title = {{Development of CdSe-ZnO Flower-Rod Core-Shell Structure Based Photoelectrochemical Biosensor for Detection of Norovirous RNA}},
  booktitle = {Sensors},
  year = {2018},
  url = {https://openreview.net/forum?id=xcXrghT2ERG},
}
Figure