Development of a 127Xe calibration source for nEXO

B. G. Lenardo, C. A. Hardy, R. Tsang, J. C. Nzobadila Ondze, A. Piepke, S. Triambak, A. Jamil, G. Adhikari, S. Al Kharusi, Evan Angelico, I. J. Arnquist, V. Belov, E. P. Bernard, Aaqib Ayoub Bhat, Trilochan Bhatta, A. E. Bolotnikov, P. A. Breur, J. Brodsky, A. Brown, T. Brunner, E. Caden, G. F. Cao, Liangzhi Cao, B. Chana, Serge A. Charlebois, D. Chernyak, M. Chiu, J.r. Cohen, R. Collister, J. Dalmasson, T. Daniels, L. Darroch, R. DeVoe, M. L. di Vacri, Ying Ding, M. J. Dolinski, J. Echevers, B. Eckert, M. Elbeltagi, L. Fabris, D. Fairbank, W. M. Fairbank, J. Farine, Yanyan Fu, G. Gallina, P. Gautam, G. Giacomini, W. Gillis, C. Gingras, R. Gornea, G. Gratta, Khadouja Harouaka, M. Heffner, Emilie Hein, J. Hößl, A. House, A. Iverson, X. S. Jiang, A. Karelin, L. J. Kaufman, R. Krücken, A. Kuchenkov, K.s. Kumar, A. C. Larson, K. G. Leach, D. S. Leonard, G. Li, S. Li, Z. Li, C. Licciardi, R. Lindsay, R. MacLellan, J. Masbou, K. McMichael, M. Medina Peregrina, B. Mong, David C. Moore, K. Murray, J. Nattress, C. R. Natzke, X.e. Ngwadla, K. Ni, Zhe Ning, J. L. Orrell, G.s. Ortega, I. Ostrovskiy, C.t. Overman, Andréa Perna, T. Pinto Franco, A. Pocar, J.‐f. Pratte, N. Priel, E. Raguzin, G.j. Ramonnye, H. Rasiwala, Kurtis Raymond, G. Richardson, M. Richman, Jon Ringuette, P.c. RowsonJournal of Instrumentation 2022 · DOI · arXiv

TL;DR

Researchers have developed a novel internal calibration method for the nEXO experiment using the radioisotope $^{127}$Xe. By injecting small amounts of this gas directly into the detector’s liquid xenon, they can continuously map the detector's response in real-time without interfering with the search for rare physics events.

What Problem Does This Paper Address?

The nEXO experiment is a massive, 5-tonne liquid xenon (LXe) time projection chamber (TPC) designed to search for neutrinoless double beta decay ($0\nu\beta\beta$). If discovered, this decay would prove that neutrinos are their own antiparticles and help explain the matter-antimatter asymmetry of the universe.

To succeed, nEXO needs incredible energy resolution (better than 1% at the signal peak). However, a detector this large has non-uniform responses:

  1. Lightmap: Scintillation light is absorbed or reflected differently depending on where an event occurs.
  2. Electron Lifetime: As ionized electrons drift through the xenon, they can be captured by impurities, "dimming" the signal over time.

Standard external calibration (placing radioactive sources outside the detector) fails because 5 tonnes of xenon act as a powerful shield, preventing radiation from reaching the center. Existing internal sources like $^{220}$Rn are useful but have short half-lives or produce backgrounds that can leak into the signal region.

Methods

The authors propose using $^{127}$Xe, an isotope that decays via electron capture with a 36.3-day half-life.

  • Production: They produced the source by exposing natural xenon gas to neutrons at the McClellan Nuclear Research Center (MNRC). This activates the $^{126}$Xe already present in the gas.
  • Radioassay: To ensure purity, they used High-Purity Germanium (HPGe) detectors to identify the resulting isotopes. They confirmed the presence of $^{127}$Xe and checked for long-lived contaminants like $^{137}$Cs.
  • Experimental Demonstration: The team injected the activated gas into a small-scale prototype TPC at Stanford. They monitored the trigger rate to confirm mixing and used the resulting data to measure the "electron lifetime" ($\tau_e$) of the system.
  • Neural Network Reconstruction: For the full-scale nEXO projections, they moved beyond simple data binning. They trained a 5-layer feed-forward Neural Network (NN) to learn the 3-dimensional "lightmap" of the detector, which allows for smoother and more accurate corrections in a massive volume.

Datasets

  • Experimental Data: Collected from the Stanford LXe TPC prototype to validate injection and mixing.
  • Simulated Datasets: Generated using the nexo-offline software package (based on Geant4 and NEST). These datasets included up to $10^7$ simulated $^{127}$Xe decays to project how the source would perform in the full 5-tonne nEXO detector.

Key Insights and Ideas

  • The "Goldilocks" Isotope: $^{127}$Xe is ideal because its 36.3-day half-life is long enough to allow the gas to mix uniformly throughout the 5-tonne volume, but short enough that it doesn't become a permanent background.
  • Low Energy Footprint: The $Q$-value of $^{127}$Xe is 662 keV, which is far below the $0\nu\beta\beta$ signal region of 2,457 keV. This allows for "always-on" calibration (at ~1 Bq activity) that doesn't interfere with the primary physics search.
  • No-Threshold Analysis: To avoid bias in measuring electron lifetime caused by charge diffusion, the authors developed a "no-threshold" reconstruction. By summing signals from the five nearest channels regardless of whether they hit a trigger threshold, they recovered "lost" charge and improved the accuracy of the lifetime measurement.
  • NN-Driven Calibration: Using a Neural Network to model the lightmap is a significant shift from traditional voxel-based maps. The NN can interpolate between data points and handle the complex geometry of a massive TPC more efficiently.

Key Results

  • Successful Production: The team successfully produced ~6.5 kBq of $^{127}$Xe, demonstrating a viable supply chain for the experiment.
  • High Precision: Simulations show that with just 1 Bq of continuous activity, nEXO can calibrate its electron lifetime daily with negligible impact on energy resolution.
  • Lightmap Accuracy: After 16 days of data collection, the NN-based lightmap reconstruction achieved an error of less than 1% across the entire detector volume, and less than 0.5% in the inner 2 tonnes (the "sweet spot" for physics).

Limitations and Future Work

  • Contamination: While $^{137}$Cs production was lower than predicted, any long-lived cesium would need to be removed via standard purification (e.g., getters or distillation) before full deployment to prevent background buildup.
  • Trigger Thresholds: The analysis assumed the 236 keV peak of $^{127}$Xe might fall below nEXO's trigger threshold, so they relied primarily on the 408 keV peak. If the threshold is higher than expected, calibration times might increase.
  • Hardware Scaling: The injection system worked for a small prototype, but metering precise, sub-Bq amounts of gas into a 5-tonne system will require further engineering of the gas handling system.

Summary updated

Abstract

Abstract We study a possible calibration technique for the nEXO experiment using a 127 Xe electron capture source. nEXO is a next-generation search for neutrinoless double beta decay (0 νββ ) that will use a 5-tonne, monolithic liquid xenon time projection chamber (TPC). The xenon, used both as source and detection medium, will be enriched to 90% in 136 Xe. To optimize the event reconstruction and energy resolution, calibrations are needed to map the position- and time-dependent detector response. The 36.3 day half-life of 127 Xe and its small Q-value compared to that of 136 Xe 0 νββ would allow a small activity to be maintained continuously in the detector during normal operations without introducing additional backgrounds, thereby enabling in-situ calibration and monitoring of the detector response. In this work we describe a process for producing the source and preliminary experimental tests. We then use simulations to project the precision with which such a source could calibrate spatial corrections to the light and charge response of the nEXO TPC.
BibTeX
@article{lenardo2022development,
  author = {B. G. Lenardo and C. A. Hardy and R. Tsang and J. C. Nzobadila Ondze and A. Piepke and S. Triambak and A. Jamil and G. Adhikari and S. Al Kharusi and Evan Angelico and I. J. Arnquist and V. Belov and E. P. Bernard and Aaqib Ayoub Bhat and Trilochan Bhatta and A. E. Bolotnikov and P. A. Breur and J. Brodsky and A. Brown and T. Brunner and E. Caden and G. F. Cao and Liangzhi Cao and B. Chana and Serge A. Charlebois and D. Chernyak and M. Chiu and J.R. Cohen and R. Collister and J. Dalmasson and T. Daniels and L. Darroch and R. DeVoe and M. L. di Vacri and Ying Ding and M. J. Dolinski and J. Echevers and B. Eckert and M. Elbeltagi and L. Fabris and D. Fairbank and W. M. Fairbank and J. Farine and Yanyan Fu and G. Gallina and P. Gautam and G. Giacomini and W. Gillis and C. Gingras and R. Gornea and G. Gratta and Khadouja Harouaka and M. Heffner and Emilie Hein and J. Hößl and A. House and A. Iverson and X. S. Jiang and A. Karelin and L. J. Kaufman and R. Krücken and A. Kuchenkov and K.S. Kumar and A. C. Larson and K. G. Leach and D. S. Leonard and G. Li and S. Li and Z. Li and C. Licciardi and R. Lindsay and R. MacLellan and J. Masbou and K. McMichael and M. Medina Peregrina and B. Mong and David C. Moore and K. Murray and J. Nattress and C. R. Natzke and X.E. Ngwadla and K. Ni and Zhe Ning and J. L. Orrell and G.S. Ortega and I. Ostrovskiy and C.T. Overman and Andréa Perna and T. Pinto Franco and A. Pocar and J.‐F. Pratte and N. Priel and E. Raguzin and G.J. Ramonnye and H. Rasiwala and Kurtis Raymond and G. Richardson and M. Richman and Jon Ringuette and P.C. Rowson},
  title = {{Development of a <sup>127</sup>Xe calibration source for nEXO}},
  journal = {Journal of Instrumentation},
  year = {2022},
  doi = {10.1088/1748-0221/17/07/p07028},
}
Figure