Development of a Photovoltaic Emergency Power System

Licheng Jiao2016 · DOI

Abstract: This paper details the design and implementation of a portable, stand-alone photovoltaic (PV) emergency power system (PVEPS) developed by engineering students at Grand Valley State University. The project addresses the critical "skills gap" in renewable energy engineering while providing a practical solution for energy poverty in Malawi's healthcare sector. The resulting system provides essential lighting and medical suction during frequent power outages at Embangweni Hospital.

Introduction

The rapid expansion of the solar industry has outpaced the supply of qualified engineers, creating a significant "PV skills gap." Simultaneously, regions like Malawi face severe energy poverty, where over 90% of electricity is hydroelectric and subject to frequent blackouts. In medical settings, these outages are life-threatening, forcing healthcare providers to perform critical procedures without adequate lighting or powered medical equipment. This project sought to address both issues by engaging students in the design of a rugged, real-world PV solution for humanitarian aid.

Design Methodology

The development of the Photovoltaic Emergency Power System (PVEPS) followed a rigorous engineering lifecycle tailored for international deployment.

Requirements and System Sizing

Students collaborated directly with medical personnel in Malawi to define system requirements. A "DC-first" architecture was chosen to maximize efficiency by eliminating inverter losses. System sizing involved standard PV equations to determine the necessary battery capacity (Amp-hours) and panel wattage, accounting for "days of autonomy" and various generation loss factors.

Geospatial Optimization

To ensure reliable performance, the team utilized NASA Surface Meteorology and Solar Energy data for Lilongwe, Malawi. By analyzing monthly averaged solar insolation, students calculated an optimal fixed tilt angle of 28° for the solar panels, maximizing energy harvest throughout the year.

Electrical schematic of the PVEPS showing the integration of the backup charger, controller, and battery bank.

Prototyping and Packaging

The system was designed for portability and durability. Using SolidWorks for 3D modeling, components were integrated into a Pelican 1550 case, ensuring the unit met airline check-in specifications for easy transport. The design included a 15A Morningstar ProStar charge controller with a 25% current buffer to handle the "edge of the cloud" effect, where atmospheric conditions can momentarily boost panel output beyond rated capacity.

Results and Field Deployment

The final PVEPS prototype successfully met the target daily energy requirement of 201.60 Wh.

Key Hardware Specifications: * Solar Array: 50W solar panel. * Storage: Two 42Ah lead-acid AGM batteries (84Ah total capacity). * Control: 15A charge controller. * Output: Sufficient to power two LED lamps, a medical suction machine for 3 hours, and mobile device chargers.

The completed PVEPS unit housed in a rugged Pelican case, shown with its portable LED lamps and accessories.

Delivered to Embangweni Hospital in May 2013, the unit has seen consistent use during weekly scheduled outages and unscheduled blackouts. The success of the initial deployment led to a request for three additional optimized units.

Discussion and Future Work

The project demonstrated that human-centric engineering significantly enhances student engagement and accountability. By solving a real-world problem for a specific "customer," students gained invaluable hands-on experience.

Future iterations of the PVEPS will focus on addressing current limitations:

  1. Battery Technology: Transitioning from lead-acid AGM batteries (2-year lifespan) to Lithium Iron Phosphate (LiFePO4) to improve longevity and reduce weight, provided budget constraints allow.
  2. Scaling: Refining the design based on field feedback to deliver more units to meet the hospital's total demand.
  3. Cost Optimization: Maintaining the strict $1,000 budget while improving component quality.

Summary updated

Abstract

Her areas of interest include semiconductor device fabrication and characterization,
BibTeX
@misc{jiao2016development,
  author = {Licheng Jiao},
  title = {{Development of a Photovoltaic Emergency Power System}},
  year = {2016},
  doi = {10.18260/p.26811},
}
Figure