Development and Assessment of a Water-Based Drilling Fluid Tackifier with Salt and High-Temperature Resistance

Yue Gao, Xiaobo Wang, Yun Cheng, Qi Xuan, Hao YanCrystals 2025 · DOI

TL;DR

This paper introduces a novel water-based drilling fluid tackifier (DT) synthesized from N-vinylformamide, divinylbenzene, and acrylamide. The developed tackifier demonstrates exceptional resistance to both high temperatures (up to 240°C) and high salt concentrations (up to 25% NaCl), crucial for deep oil and gas exploration. Its stable rheological performance under extreme conditions makes it a promising additive for next-generation drilling fluids.

What Problem Does This Paper Address?

Modern oil and gas exploration is pushing into increasingly challenging environments, particularly ultra-deep wells that can exceed 8000 meters and operate at temperatures above 200°C. These extreme conditions demand drilling fluids with additives that can maintain their performance under immense heat and high salinity. Existing viscosity improvers often struggle to meet these requirements, with their effectiveness degrading significantly at temperatures above 180°C. This paper aims to bridge this gap by developing and evaluating a new tackifier specifically designed for high-temperature and high-salt resistance, thereby enabling safer and more efficient exploration in these demanding geological formations.

Methods

The researchers synthesized a novel tackifier, denoted as DT, using a free radical polymerization technique. The key monomers employed were N-vinylformamide (NVF), divinylbenzene (DVB), and acrylamide (AM). The synthesized polymer's structure was confirmed using Fourier-Transform Infrared Spectroscopy (FTIR) and Proton Nuclear Magnetic Resonance (¹H NMR). Thermal stability was assessed through Thermogravimetric Analysis (TGA). The performance of the tackifier was evaluated by incorporating it into a base drilling fluid and subjecting it to various aging conditions (high temperature and high salt concentration). Rheological properties, including apparent viscosity (AV), plastic viscosity (PV), and yield point (YP), were measured using a rotary viscometer. Viscosity retention rate was a key metric used to quantify the tackifier's stability. High-pressure, high-temperature (HPHT) rheological tests were also conducted to assess performance under simulated downhole conditions.

Datasets

Not discussed in the paper. The study focuses on the synthesis and performance testing of a novel chemical compound in a simulated drilling fluid environment.

Key Insights and Ideas

  • Molecular Design for Resilience: The tackifier's structure, incorporating rigid benzene rings from DVB and hydrophilic/hydrophobic groups from NVF and AM, is intentionally designed to enhance both salt and temperature resistance. This molecular architecture is key to its performance.
  • Synergistic Salt and Temperature Resistance: The tackifier doesn't just tolerate high temperatures or high salt concentrations individually; it performs exceptionally well when both conditions are present. This is a critical finding for real-world drilling applications.
  • Viscosity "Boost" in Saline Environments: Interestingly, the tackifier can actually increase viscosity in the presence of salt, up to a certain point (25% NaCl in this study), suggesting a complex interaction beyond simple thickening.
  • Stable Rheology at Elevated Temperatures: The tackifier ensures that drilling fluid rheology remains consistent and stable within a critical temperature range (150°C to 180°C), which is vital for maintaining wellbore integrity.
  • Hydrophobic Association as a Mechanism: The paper suggests that hydrophobic association of phenyl groups in the tackifier's side chains plays a significant role in maintaining viscosity at high temperatures, forming microstructures that stabilize the fluid.

Key Results

  • The synthesized tackifier (DT) demonstrated a viscosity retention rate of 87.1% in a base slurry with 15% NaCl after aging at 240°C.
  • In a slurry with 25% NaCl, the viscosity retention rate reached 130% at 200°C, indicating a significant viscosity enhancement under these conditions.
  • Under high-temperature aging (200°C to 240°C for 16 hours), the drilling fluid with DT showed viscosity retention rates ranging from 87.1% to 187.1%.
  • HPHT rheological tests showed that DT-containing fluids maintained consistent rheological behavior between 150°C and 180°C, stabilizing viscosity and strength.
  • The tackifier exhibited good thermal stability, with significant decomposition occurring above 229°C.

Limitations and Future Work

  • Bubble Generation: The authors noted that a large number of bubbles were generated after high-temperature aging and stirring at high speeds (220-240°C), which sometimes made viscosity measurements difficult. This suggests a potential issue with foam stability or gas evolution under extreme conditions.
  • Extreme Aging Cycles: While the tackifier performed well, the viscosity retention rate gradually decreased during multiple aging cycles (n=1-4) at the higher end of the temperature range (220-240°C), indicating that prolonged exposure to the most extreme conditions might still lead to some degradation.
  • Industrialization Potential: The paper concludes that the preparation process is straightforward and amenable to industrialization, but further optimization and scale-up studies would be beneficial.
  • Further Investigation of Mechanism: While hydrophobic association is proposed as a key mechanism, deeper investigation into the precise microstructural changes and interactions at the molecular level under various conditions could provide further insights.
  • Field Trials: The study was conducted in a laboratory setting. Future work should involve field trials to validate the tackifier's performance in actual drilling operations.

Summary updated

Abstract

A high-temperature-resistant copolymer thickener (DT) was synthesized through free radical polymerization, utilizing monomers such as N-vinylformamide (NVF), divinylbenzene (DVB), and acrylamide (AM) as the primary raw materials. The polymer system’s structure was characterized using FTIR and 1H NMR, while its thermal properties were analyzed through thermogravimetric analysis. The viscosity changes of the polymers were evaluated before and after high-temperature aging at various temperatures. The results indicated that the viscosity retention rate of the thickener DT in the base slurry at 240 °C and 15% NaCl was 87.1%. Additionally, it exhibited varying anti-aging cycles between 200 °C and 240 °C. In a slurry with 25% NaCl, the viscosity retention rate reached 130% at 200 °C. High-temperature and high-pressure rheological tests demonstrated that drilling fluids containing DT exhibit consistent rheological behavior within the temperature range of 150 °C to 180 °C, which aids in stabilizing the viscosity and strength of drilling fluids at elevated temperatures.
BibTeX
@inproceedings{gao2025development,
  author = {Yue Gao and Xiaobo Wang and Yun Cheng and Qi Xuan and Hao Yan},
  title = {{Development and Assessment of a Water-Based Drilling Fluid Tackifier with Salt and High-Temperature Resistance}},
  booktitle = {Crystals},
  year = {2025},
  doi = {10.3390/cryst15010082},
}
Figure