Development and Analysis of Digging and Soil Removing Mechanisms for Mole-Bot: Bio-Inspired Mole-Like Drilling Robot

Junseok Lee, Christian Tirtawardhana, Hyun MyungIROS 2020 · DOI

Abstract

Researchers have developed "Mole-Bot," a bio-inspired drilling robot that mimics the specialized anatomy of mole-rats and European moles to excavate soft soil efficiently. By combining an expandable drill bit (inspired by mole-rat teeth) with a debris-removing forelimb mechanism, the robot achieves a high expansion ratio and a drilling speed that outperforms existing planetary exploration tools.

Introduction

Traditional drilling equipment often suffers from its own success: as the need to drill deeper or through tougher materials grows, machines become increasingly bulky, heavy, and complex to install. Furthermore, conventional methods frequently rely on "mud" or slurry to flush out debris, which is environmentally taxing and impractical for "weak" or soft grounds that cannot withstand high fluid pressures.

There is a growing demand for small-scale, efficient drilling for shallow resource exploration (such as Rare Earth Elements found within 30m of the surface) and planetary missions to Mars or the Moon. Existing small-scale drills, like the PLUTO tool used for Martian soil, are often slow or limited in penetration depth. The Mole-Bot aims to bridge this gap by creating a compact robot capable of digging holes significantly larger than its own body without requiring heavy support equipment or messy drilling fluids.

Bio-Inspired Design and Methodology

The Mole-Bot utilizes a two-pronged bio-inspired approach to address the challenges of excavation and debris removal.

The overall assembly of the Mole-Bot, highlighting the integration of the expandable drill bit and the soil-removing forelimb mechanism.

1. The Expandable Drill Bit

Mimicking the incisors and highly mobile head of a mole-rat, the team designed a bit that can expand from a diameter of 93.4 mm to 202 mm—an expansion ratio of 2.16. Unlike previous expandable bits that require bulky hydraulic pistons, this design uses a single actuator. A clever screw-pattern and linear-motion mechanism allows the motor to rotate the bit while simultaneously expanding or folding the blades. To manage friction and forward force during continuous rotation, the researchers implemented a set of spring-loaded caster wheels that use self-aligning torque.

2. Soil Removing Mechanism

Inspired by the European mole’s scapula and humerus, the robot features a pair of "forefeet" designed to clear excavated soil.

Bio-inspired translation of mole skeletal structures (scapula, humerus, and forefoot) into the robot's soil-removing mechanical links.

A worm gear and rack-pinion system converts the rotational motion of a servo motor into the complex spreading and gathering motions needed to push debris to the rear of the robot. The researchers developed a six-step digging sequence that alternates between soil crushing and debris clearing to prevent mechanical interference between the drill and the "arms."

Key Insights

The development of Mole-Bot yielded several critical engineering insights:

  • Mechanical Synergy: Using a single actuator for both rotation and expansion drastically reduces the robot's weight and complexity.
  • Anatomical Translation: The design translates the mechanical advantages of mole bone structures, such as the flat, broad humerus, into engineering components capable of transmitting high torque in confined spaces.
  • Postural Control: The high expansion ratio allows the robot to potentially use borehole walls for stabilization, mimicking how burrowing animals wedge themselves into tunnels.

Experimental Results and Benchmarking

The researchers evaluated the Mole-Bot using simulations and physical experiments with Autoclaved Lightweight Concrete (ALC) to represent soft soil (4 MPa compressive strength).

  • Rate of Penetration (ROP): The Mole-Bot achieved an estimated ROP of 1.05 meters per hour, significantly outperforming existing planetary drilling systems like PLUTO (0.75 m/hr) and the Venus drill (0.35 m/hr).
  • Structural Integrity: Finite Element Analysis (FEA) confirmed that maximum stress on the internal shaft (4.682 MPa) remained well within safety limits for the steel and aluminum components.
  • Operational Efficiency: The system successfully cleared debris every 30mm of drilling, validating the alternating digging/clearing sequence.

Limitations and Future Work

While the current prototype demonstrates the viability of the digging head, several challenges remain for full autonomy. Future work will focus on developing locomotion and anchoring mechanisms to provide necessary reaction forces against the soil. Additionally, while lab tests in ALC were successful, real-world field trials are required to test the robot against heterogeneous soil conditions. Finally, transitioning from an external power supply to an onboard power system will be essential for long-duration missions.

Summary updated

BibTeX
@inproceedings{lee2020development,
  author = {Junseok Lee and Christian Tirtawardhana and Hyun Myung},
  title = {{Development and Analysis of Digging and Soil Removing Mechanisms for Mole-Bot: Bio-Inspired Mole-Like Drilling Robot}},
  booktitle = {IEEE/RSJ International Conference on Intelligent Robots and Systems},
  year = {2020},
  doi = {10.1109/iros45743.2020.9341230},
}
Figure