Determining aromatic and aliphatic carboxylic acids in biomass-derived oil samples using 2,4-dinitrophenylhydrazine and liquid chromatography-electrospray injection-mass spectrometry/mass spectrometry

Samuel A. Lewis, Raynella M. Connatser, Mariefel V. Olarte, James R. KeiserBiomass 2017 · DOI

TL;DR

This paper presents a refined analytical method to accurately identify and quantify aromatic and aliphatic carboxylic acids in complex biomass-derived oils. By modifying the standard DNPH derivatization and employing LC-ESI-MS/MS, the researchers overcome previous limitations in distinguishing these crucial, yet often overlooked, acidic components from other carbonyls, which is vital for understanding bio-oil stability and corrosion potential.

What Problem Does This Paper Address?

The transition to sustainable, bio-derived fuels is a critical global goal, with biomass pyrolysis offering a promising route to produce liquid fuels. However, the resulting pyrolysis oils are complex mixtures containing various oxygenated compounds, including aldehydes, ketones, and carboxylic acids. These components, particularly carboxylic acids, contribute to significant challenges in the storage and upgrading of bio-oils, leading to issues like corrosion of processing equipment and instability of the fuel itself. While analytical methods exist for aldehydes and ketones, accurately identifying and quantifying carboxylic acids, especially larger aromatic and aliphatic ones, has been a persistent challenge. Existing methods often struggle to differentiate them from isobaric compounds like hydroxyaldehydes, leading to incomplete characterization and hindering efforts to optimize bio-oil utilization and ensure infrastructure longevity.

Methods

The core of this research lies in adapting and optimizing a well-established analytical technique: derivatization with 2,4-dinitrophenylhydrazine (DNPH) followed by liquid chromatography-electrospray ionization-mass spectrometry/mass spectrometry (LC-ESI-MS/MS).

Here's a breakdown of the key methodological aspects:

  • DNPH Derivatization: The standard DNPH method, commonly used for aldehydes and ketones, was modified. Crucially, the authors adjusted the pH during the extraction procedure and extended the heating time of the DNPH solution. These modifications were essential to overcome the inherent resistance of carboxylic acids to DNPH addition, which is due to resonance stabilization and the formation of negatively charged carboxylates.
  • LC-ESI-MS/MS: Liquid chromatography (LC) was used to separate the derivatized compounds. Electrospray ionization (ESI) was employed to introduce the separated analytes into the mass spectrometer. Tandem mass spectrometry (MS/MS) was then used for structural elucidation and identification. The MS/MS fragmentation patterns provided unique "fingerprints" for distinguishing between different types of compounds, including carboxylic acids and their isobaric analogs.
  • Distinguishing Isobars: The paper highlights how LC retention times and characteristic MS/MS fragmentation patterns were used to differentiate between isobaric compounds (molecules with the same mass but different structures), such as ketones and aldehydes, and importantly, between carboxylic acids and their hydroxyaldehyde or ketone counterparts.

Datasets

The study utilized:

  • Standard Solutions: Pure standards of various carboxylic acids (e.g., acetic, propionic, benzoic, salicylic acids) and aldehydes (e.g., 4-hydroxybenzaldehyde) were used to validate the derivatization and analytical method.
  • Biomass-Derived Oil Samples: The primary dataset consisted of a partially hydrotreated bio-oil derived from a blend of pine, forest residue, and industrial construction waste. This bio-oil was produced via fast pyrolysis and subsequently stabilized.

No new benchmarks were introduced; rather, the paper focused on improving the analysis of existing complex bio-oil samples.

Key Insights and Ideas

  • DNPH Can Derivatize Carboxylic Acids: The most significant insight is the successful demonstration that, with careful optimization of pH and reaction time, DNPH can effectively derivatize both aromatic and aliphatic carboxylic acids, not just aldehydes and ketones. This expands the utility of a widely used analytical tool.
  • Extended Heating and pH Control are Crucial: The specific modifications to the DNPH derivatization protocol (extended heating and pH adjustment) were key to overcoming the chemical barriers that prevent carboxylic acid derivatization.
  • MS/MS Fragmentation is Key for Differentiation: The unique fragmentation patterns observed in MS/MS analysis provided the critical ability to distinguish between carboxylic acids and their isobaric hydroxyaldehyde or ketone analogs, which co-elute in LC.
  • Bio-oils Contain Significant Amounts of Larger Carboxylic Acids: The research revealed the presence of larger aliphatic and aromatic carboxylic acids in the bio-oil, which are often overlooked by traditional analytical methods. These acids are not only potentially corrosive but also represent valuable chemical building blocks for fuel upgrading.
  • Understanding Corrosivity and Instability: By accurately identifying these acidic components, researchers can better understand the root causes of bio-oil corrosivity and instability, leading to improved material selection for processing and storage, and more efficient upgrading strategies.

Key Results

  • The modified DNPH derivatization and LC-ESI-MS/MS method successfully identified and differentiated aromatic and aliphatic carboxylic acids in a real bio-oil sample.
  • Characteristic MS/MS fragmentation ions were identified for both aliphatic (e.g., 167 Da for aliphatic carboxylic acids) and aromatic carboxylic acids.
  • The method demonstrated the ability to distinguish between isobaric compounds, such as propionic acid/hydroxypropionaldehyde and formaldehyde, and butyric acid/hydroxybutyraldehyde and butyraldehyde, which are problematic in standard HPLC-UVvis analysis.
  • The study confirmed the presence of larger carboxylic acids, including benzoic and salicylic acids, in the bio-oil, along with their hydroxybenzaldehyde analogs.

Limitations and Future Work

  • Quantitative Accuracy: While the method demonstrates successful identification, the paper implies that further optimization might be needed for precise quantitative analysis of all identified species, especially given the complexity of the bio-oil matrix.
  • Broader Range of Bio-oils: The study focused on a specific hydrotreated bio-oil. Future work could involve applying and validating this method across a wider range of bio-oil feedstocks and processing conditions.
  • Optimization for Specific Acids: The paper suggests that the derivatization efficiency for certain acids might vary, and further optimization could be beneficial for specific compound classes.
  • Semi-Quantitation: The authors mention "semi-quantitation," indicating that while the presence and relative amounts can be inferred, absolute quantification might require more rigorous calibration and validation.

The authors suggest that this improved analytical capability will allow for a fuller understanding of bio-oil corrosivity and instability, leading to more intelligent deployment of upgrading strategies and better utilization of energetically valuable carboxylic acid components.

Summary updated

BibTeX
@inproceedings{lewis2017determining,
  author = {Samuel A. Lewis and Raynella M. Connatser and Mariefel V. Olarte and James R. Keiser},
  title = {{Determining aromatic and aliphatic carboxylic acids in biomass-derived oil samples using 2,4-dinitrophenylhydrazine and liquid chromatography-electrospray injection-mass spectrometry/mass spectrometry}},
  booktitle = {Biomass},
  year = {2017},
  doi = {10.1016/j.biombioe.2017.10.043},
}
Figure