Deteriorated Device Characteristics in 3D-LSI Caused by Distorted Silicon Lattice

M. Murugesan, Yasuhiko Imai, Shigeru Kimura, Takafumi Fukushima, J. C. Bea, Hisashi Kino, Kangwook Lee, Tetsu Tanaka, Mitsumasa KoyanagiIEEE Transactions on Electron Devices 2014 · DOI

Abstract

Silicon-lattice distortion in the 50- μm-thick stacked large scale integrated circuit (LSI) chip over Cu-Sn μ-bumps was studied by synchrotron-assisted micro-X-ray diffraction. The top and bottom surfaces of the upper chip experienced 0.25% and 0.1% tensile strain (equivalent to 450 and 200 MPa of tensile stress), respectively. Si [004] plane showed a maximum tilt value of +0.45 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">°</sup> and -0.25 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">°</sup> , respectively, over the μ-bump and in the bump-space region. Raman spectroscopy revealed that upper stacked chip experienced ~ 1000 MPa of tensile stress and ~ -200 MPa of compressive stress, respectively, over the μ-bump and bump-space regions. Distorted Si-lattice in 3D-LSIs caused 4% and 12% change in ON-current characteristic for n- and p-MOSFET devices, respectively.
BibTeX
@article{murugesan2014deteriorated,
  author = {M. Murugesan and Yasuhiko Imai and Shigeru Kimura and Takafumi Fukushima and J. C. Bea and Hisashi Kino and Kangwook Lee and Tetsu Tanaka and Mitsumasa Koyanagi},
  title = {{Deteriorated Device Characteristics in 3D-LSI Caused by Distorted Silicon Lattice}},
  journal = {IEEE Transactions on Electron Devices},
  year = {2014},
  doi = {10.1109/ted.2013.2295463},
}

Loading related content...

Figure