Design optimization of an 8 W, microscale, axial-flux, permanent-magnet generator

David P. Arnold, Florian Herrault, I. Zana, Peter R. Galle, Jinwoo Park, Sauparna Das, Jeffrey H. Lang, Mark G. AllenJournal of Micromechanics and Microengineering 2006 · DOI

Abstract

This paper presents the design optimization and characterization of a microscale, permanent-magnet (PM) generator, capable of supplying 8 W of dc power to a resistive load at a rotational speed of 305 000 rpm. The generator is a three-phase, axial-flux, PM machine, consisting of a stator with Cu surface windings and a multi-pole SmCo PM rotor. Optimization of the machine geometries has enabled a 30% improvement in power density (for the same rotational speed) over a previously reported machine. Furthermore, these design improvements, in combination with higher rotational speeds, have enabled a >7× improvement in total output power and a net power density of 59 W cm−3.
BibTeX
@article{arnold2006design,
  author = {David P. Arnold and Florian Herrault and I. Zana and Peter R. Galle and Jinwoo Park and Sauparna Das and Jeffrey H. Lang and Mark G. Allen},
  title = {{Design optimization of an 8 W, microscale, axial-flux, permanent-magnet generator}},
  journal = {Journal of Micromechanics and Microengineering},
  year = {2006},
  doi = {10.1088/0960-1317/16/9/s17},
}

Loading related content...

Figure