Design of Wideband High-Gain Patch Antenna Array for High-Temperature Applications

Ruibo Li, Peng Li, Paolo Rocca, Aarón Ángel Salas Sánchez, Liwei Song, Xinghua Li, Wanye Xu, Zijiao Fan2023 · DOI

TL;DR

This paper presents a novel wideband, high-gain patch antenna array designed for high-temperature environments. The array utilizes a unique double-H-shaped slot radiating element, achieving a 41.3% fractional bandwidth and a peak gain of 10.2 dBi for a single element, and a 39.4% FBW with 18.7 dBi gain for the 4x4 array. Crucially, the antenna demonstrates remarkable stability across a wide temperature range (-50°C to 150°C), making it suitable for demanding applications.

What Problem Does This Paper Address?

Traditional patch antennas often suffer from narrow bandwidth, low gain, and sensitivity to environmental factors, particularly temperature. High-temperature environments can significantly alter material properties, leading to shifts in resonant frequency and reduced gain, rendering standard antennas unreliable. This paper tackles the challenge of designing a robust, wideband, and high-gain antenna specifically for these harsh conditions, aiming to provide a reliable sensing solution for applications like radar, satellite communication, and remote sensing in extreme thermal environments.

Methods

The core of the proposed solution lies in a novel antenna element design featuring a double-H-shaped slot within a microstrip patch radiator, coupled with a parasitic coplanar radiator. This stacked structure, with an air gap between the radiators, creates a resonant cavity that effectively reduces the Q-factor and broadens the antenna's bandwidth. The design process involved a four-stage optimization, progressively introducing features like the H-shaped slot, parasitic patches, and the stacked structure, with simulations guiding each step.

For the array, a 4x4 configuration was chosen, employing a corporate feed network with a 1-to-16 power divider to ensure equal power distribution to each element. The inter-element spacing was optimized based on the antenna element's wavelength. The antenna's performance was simulated using HFSS and then validated through fabrication and experimental measurements. A key aspect of the validation was testing the antenna's reflection coefficient in a high-low temperature chamber across a wide temperature range.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Double-H Slot for Bandwidth Enhancement: The novel double-H-shaped slot in the patch radiator, combined with the stacked parasitic element, is the key innovation for achieving wide bandwidth. This configuration excites multiple resonant modes and creates a resonant cavity that broadens the operational frequency range.
  • Air Gap for Thermal Stability: The inclusion of an air gap between the radiating elements is crucial for mitigating the impact of temperature variations. Air's low thermal expansion coefficient and stable dielectric properties help maintain antenna performance across a wide temperature range.
  • Stacked Structure for Gain and Bandwidth Synergy: The stacked design, with the coplanar radiator acting as a parasitic element, not only enhances bandwidth but also contributes to a higher gain compared to single-layer patch antennas.
  • Robustness to Temperature: The experimental results demonstrating stable reflection coefficients across -50°C to 150°C are a significant finding, highlighting the antenna's suitability for high-temperature applications where conventional antennas would fail.
  • Trade-off Optimization: The paper showcases a successful balance between antenna thickness, gain, and bandwidth, which is a common challenge in antenna design.

Key Results

  • Single Element Performance:
    • Fractional Bandwidth (FBW): 41.3% (12 GHz to 18.25 GHz)
    • Peak Gain: 10.2 dBi at 15.5 GHz
  • 4x4 Array Performance:
    • Fabricated Prototype Dimensions: 78 x 78 x 3.7 mm³
    • Operational Bandwidth: 11.4 GHz to 17 GHz (39.4% FBW)
    • Peak Gain: 18.7 dBi at 15.5 GHz (only 0.4 dB lower than simulated)
  • Temperature Stability:
    • Reflection coefficient remained stable across a temperature range of -20°C to 150°C, with marginal variations.
  • Simulations indicated good stability even at -50°C.
  • Radiation Patterns: Measured patterns showed good agreement with simulations, with low sidelobe levels (below -11 dB) and cross-polarization levels (below -15 dB).

Limitations and Future Work

  • Gain Measurement at Extreme Temperatures: While the reflection coefficient was measured across a wide temperature range, the paper does not present gain measurements at these extreme temperatures. This would be a valuable extension to fully characterize the antenna's performance under all specified conditions.
  • Power Pattern Measurement in Chamber: The paper notes that the power pattern could not be measured in the high-low temperature chamber due to equipment limitations. However, simulations were performed to confirm pattern stability, which is a good proxy but not a direct measurement.
  • Future Work Suggestions: The authors suggest that the antenna has good potential for application in higher-temperature environments. Future work could focus on exploring even wider bandwidths or higher gains, or adapting the design for specific applications requiring these enhanced characteristics. Further investigation into the precise impact of extreme temperatures on gain and radiation patterns would also be beneficial.

Summary updated

BibTeX
@misc{li2023design,
  author = {Ruibo Li and Peng Li and Paolo Rocca and Aarón Ángel Salas Sánchez and Liwei Song and Xinghua Li and Wanye Xu and Zijiao Fan},
  title = {{Design of Wideband High-Gain Patch Antenna Array for High-Temperature Applications}},
  year = {2023},
  doi = {10.3390/s23083821},
}
Figure