Design of Water Supply Pipe Networks in NIT Srinagar using EPANET Software

Sandeep Thakur, Abhinav Verma, V K Angral, M.a Ahanger, Nit Srinagar2020 · DOI

Abstract

This study presents the design and optimization of a comprehensive water supply pipe network for the National Institute of Technology (NIT) Srinagar campus. Utilizing EPANET software, the researchers modeled the hydraulic behavior of the network over a 30-year design horizon. The simulation results were validated using the classical Hardy Cross Method, ensuring high accuracy in flow and pressure predictions. The proposed design successfully meets the projected demand of 27.68 liters per second (lps) while maintaining required residual heads across diverse campus facilities.

Introduction

As institutional campuses expand, their existing water infrastructure often becomes inadequate, leading to pressure drops and inconsistent supply. NIT Srinagar faced the challenge of upgrading its network to accommodate a growing population of students, faculty, and staff. Designing such a system requires balancing long-term "design decisions," such as pipe sizing and reservoir placement, with "operational decisions" like pump management. This paper details a robust engineering approach to ensure the campus's water security for the next three decades.

Methodology

The design process followed a rigorous multi-step framework:

  1. Demand Estimation: Water requirements were calculated based on Indian Standard (IS) Code 1172:1993. Different consumption rates were assigned based on building type, such as 135 liters per capita per day (lpcd) for hostels and 450 lpcd for medical units.
  2. Population Projection: The model accounts for a 30-year growth margin for both residential and non-residential populations.
  3. EPANET Modeling: The software was used to simulate the distribution system, sizing pipes to ensure adequate residual heads (pressures) at all nodes under peak demand conditions. A peak factor of 2 was applied to account for diurnal usage spikes.
  4. Hardy Cross Validation: To verify the software's outputs, the researchers performed manual calculations on a 5-hub loop using the iterative Hardy Cross Method, which balances flow based on continuity and energy conservation principles.
Hardy Cross validation loop for the NIT Srinagar network.

Results and Discussion

The total net water demand for the campus, including new academic blocks and residential hostels, was determined to be 27.68 lps (approximately 2.39 million liters per day).

The validation process confirmed the reliability of the EPANET model. The Hardy Cross analysis yielded a flow deviation ($dQ$) of only -0.0267 lps, indicating a high degree of convergence between the manual and software-based results.

Furthermore, the study established specific residual head requirements for various campus zones. These requirements varied significantly depending on the building's function and height, ranging from 7m for smaller hostels to 32m for multi-story academic blocks.

Water demand and residual head requirements for various campus blocks.

Conclusion

The application of EPANET, supported by Hardy Cross validation, provides a reliable blueprint for the NIT Srinagar water supply network. The design successfully addresses the diverse demand profiles of an institutional campus while ensuring adequate pressure for multi-story structures. Future work could enhance this model by incorporating water quality simulations (such as chlorine decay) and transient analysis to mitigate potential water hammer effects. Additionally, integrating sustainable practices like rainwater harvesting could further optimize the campus's water footprint.

Summary updated

Abstract

Design of Water Supply Pipe Networks in NIT Srinagar using EPANET Software - written by Sandeep Thakur , Abhinav Verma , V K Angral published on 2020/04/04 download full article with reference data and citations
BibTeX
@article{thakur2020design,
  author = {Sandeep Thakur and Abhinav Verma and V K Angral and M.A Ahanger and NIT Srinagar},
  title = {{Design of Water Supply Pipe Networks in NIT Srinagar using EPANET Software}},
  journal = {International Journal of Engineering Research and},
  year = {2020},
  doi = {10.17577/ijertv9is030615},
}
Figure