Design of the Tunnel Robot Based on the Crawler Chassis

Wei Song, Xiaolong Zhou, Ying Zhang, Jie Xiao2016 · DOI

Abstract

To improve the mobility and obstacle-clearing capabilities of robots operating within high-voltage cable tunnels, this paper presents a modular swing-arm crawler chassis. The design features independent front swing arms that can rotate to any angle, significantly enhancing terrain adaptability for climbing movements. The chassis utilizes independent motor drives for its walking tracks, enabling differential steering and 360° in-situ rotation in confined spaces. This approach simplifies traditional crawler production while maintaining a high load capacity.

Introduction

Maintaining high-voltage cable tunnels is a critical yet hazardous task. These environments are often characterized by water, silt, corrosive gases, and physical barriers such as steps. Manual inspections are inefficient and pose safety risks. Existing robotic solutions frequently struggle with "terrain adaptability"—the capacity to transition between flat ground, mud, and stairs without losing stability. This research addresses these challenges by developing a mechanically robust robot capable of navigating narrow urban utility tunnels and negotiating complex obstacles.

System Architecture

The robot is composed of two primary modules: a mobile crawler chassis and a 7-degree-of-freedom (DOF) inspection head.

1. Modular Swing-Arm Crawler Chassis

The chassis is designed for maximum agility and environmental resilience.

  • Mechanical Synchronization: A dual-output worm gear deceleration motor is used to synchronize the left and right climbing arms. This hardware-level solution ensures both arms lift simultaneously, simplifying control logic compared to software-based synchronization.
  • Differential Steering: Independent motors drive the two main tracks, allowing for a turning diameter of just 1,000 mm and 360° in-situ rotation.
  • Environmental Protection: Sealed water shields protect the motors, enabling operation in water depths of 200–300 mm and mud depths of 50–100 mm.
Overview of the tunnel robot's whole mechanism, including the chassis and telescopic arm.

2. 7-DOF Inspection Head

The inspection system features a three-section folding arm designed for a wide field of regard.

  • Synchronous Belt Transmission: To minimize weight at the joints, synchronous belts are used to fold and unfold the three arm sections simultaneously. This reduces the number of heavy motors required.
  • Stabilization: A "camera balanced joint" maintains the 2-DOF camera module's orientation relative to the horizon, regardless of the lifting arm's angle, ensuring stable visual feedback.
Detailed diagram of the track drive logic and the 7-DOF inspection arm's degrees of freedom.

Key Insights and Results

The design prioritizes hardware-level reliability. By offloading synchronization to the worm gear and belt systems, the robot remains functional even in harsh environments where sensor feedback might be unreliable.

Performance Metrics: * Mobility: 360° in-situ rotation within a 1,000 mm diameter. * Obstacle Negotiation: The front swing arms allow the robot to climb stairs and "over-the-threshold" barriers. * Resilience: Wading depth of up to 300 mm and mud depth of up to 100 mm. * Efficiency: The 7-DOF platform is controlled by only five motors, reducing algorithmic complexity.

Conclusion and Future Work

While the folding arm provides excellent range, its retracted state occupies significant chassis space, and the weight distribution of the extended arm requires careful balancing. Future research will focus on optimizing the structure for better center-of-gravity management and refining autonomous "key lifting" algorithms to move toward fully unmanned tunnel monitoring.

Summary updated

Abstract

In order to promote the movement inside tunnel robot in the cable tunnel and obstacle capability, designed a swing arm type crawler chassis, applied to the robot. The chassis adopts the modular design, assembly simple replacement maintenance convenience, enhances the terrain adaptability. Swing arm type caterpillar chassis adopts the former independent form of swing arm, using crawler swing arm Angle before climbing movement, before the swing arm can rotate at any Angle, boosting the terrain adaptability. Two walking tracks the independent motor drive, can achieve differential steering, a is a counter can be realized in situ 360 rotation, can make the chassis in the narrow space free to; And simplify the traditional crawler chassis production complexity, strong load capacity at the same time.
BibTeX
@misc{song2016design,
  author = {Wei Song and Xiaolong Zhou and Ying Zhang and Jie Xiao},
  title = {{Design of the Tunnel Robot Based on the Crawler Chassis}},
  year = {2016},
  doi = {10.2991/icmeit-16.2016.23},
}
Figure