Abstract
A one-eighth spherical surface dielectric resonator antenna (OESS-DRA) is proposed for the first time. To analyze this thin shell structure, electromagnetic field distribution is discussed using the Hertz vector and boundary conditions. The solution of Maxwell equations is simplified via the Hertz vector because the polarization current is primary in the OESS-DRA. The proposed antenna consists of a one-eighth spherical dielectric shell fed by a coaxial probe; a ground plane with a metal-corner-reflector provides high gain and directional radiation properties. Experimental results show a bandwidth of 4.56-6.88 GHz, a peak gain of 11.8 dBi at 5.0 GHz, and radiation efficiency exceeding 85% across the entire band.
Introduction
The rollout of 5G technology necessitates antennas that are high-gain, wideband, and cost-effective. Dielectric Resonator Antennas (DRAs) are attractive candidates due to their lack of conduction losses at high frequencies. However, traditional hemispherical DRAs are often bulky and consume significant amounts of expensive dielectric material. Moreover, standard designs can suffer from asymmetrical radiation patterns or narrow bandwidths. This research introduces a "flake" or shell-like structure—the One-Eighth Spherical Surface Dielectric Resonator Antenna (OESS-DRA)—designed to maintain high performance while reducing material costs and enabling conformal integration.
Design and Methodology
The core innovation lies in the antenna's geometry. The researchers derived the structure by bisecting a hemispherical dielectric shell twice to create a one-eighth spherical surface.
To analyze this thin shell (typically 1–3 mm thick), the team employed Hertz vectors to simplify Maxwell’s equations, an approach particularly suited for structures where polarization current is the dominant driver of electromagnetic fields. The antenna is excited by a vertical coaxial probe. To transform the naturally broad radiation of the shell into a highly directional beam, a rectangular metal corner reflector was integrated into the ground plane. This addition is critical for achieving the high gain required for 5G applications.
The design was optimized using HFSS (High Frequency Structure Simulator) and fabricated using 3D printing, allowing for precise control over the dielectric shell's dimensions.
Experimental Results
The OESS-DRA prototype was optimized for the 5.0 GHz band. Performance was verified through both simulation and experimental measurements in an anechoic chamber.
Key performance metrics include:
- Impedance Bandwidth: The antenna covers 4.56–6.88 GHz, achieving a 40.6% fractional bandwidth.
- High Gain: A peak gain of 11.8 dBi was recorded at 5.0 GHz, with gain consistently exceeding 9.5 dBi across the operating band.
- Radiation Efficiency: Efficiency remained above 85% throughout the working frequency range.
- Polarization Purity: Analysis confirmed operation under Hybrid Electromagnetic (HEM) modes, resulting in cross-polarization levels approximately 55 dB lower than co-polarization.
Conclusion and Future Work
The OESS-DRA offers a material-efficient, high-performance solution for 5G communication. By utilizing a thin shell and a corner reflector, the design achieves impressive gain and bandwidth while significantly reducing the volume of dielectric material required.
Future research will focus on reducing the footprint of the metal corner reflector to improve integration and scaling the design for mmWave frequencies (24 GHz and above). Additionally, addressing mounting sensitivities will be crucial for practical deployment in diverse 5G and 6G environments.
Summary updated