Design of Control System for Underwater Inspection Robot in Hydropower Dam Structures

Bing Zhao, Shuo Li, Xiangbin Wang, Mingyu Yang, Xin‐Yao Yu, Zhaoxu Meng, Gang WanJournal of Marine Science and Engineering 2025 · DOI

TL;DR

This paper presents a novel, robust control system for underwater robots designed for inspecting hydropower dams. By integrating a fixed-time disturbance observer with an adaptive super-twisting controller, the system effectively compensates for complex hydrodynamic forces, enabling stable and precise dam inspections even in challenging underwater environments.

What Problem Does This Paper Address?

Hydropower dams are critical infrastructure, but their underwater structures are susceptible to degradation from erosion, aging, and long-term stress. Traditional inspection methods using divers are risky, inefficient, and limited in scope. While underwater robots offer a promising alternative, existing systems struggle with the harsh conditions found in hydropower dams, such as extreme depths, strong currents, poor visibility, and complex near-wall environments. These challenges demand highly intelligent and robust control systems for accurate defect detection, precise navigation, and reliable sensor integration. This paper aims to bridge this gap by designing a specialized control system that enhances the operational capabilities of underwater inspection robots in these demanding scenarios.

Methods

The paper details a hierarchical control system architecture comprising hardware sensing, real-time interaction protocols, and an adaptive controller.

  • Hardware: The system includes an underwater robotic control unit, a surface human-machine operation unit, and a mission planning platform. Communication between the surface and underwater units is facilitated by fiber-optic links.
  • Software Architecture: A modular design is employed for real-time performance and reliability, with key modules including network communication, shared data repository, navigation control, operation control, and a human-machine interface.
  • Control Algorithm: The core innovation lies in the integration of two advanced control techniques:
  • Fixed-Time Sliding Mode Disturbance Observer: This component is designed to estimate and compensate for hydrodynamic disturbances in real-time. It offers a predetermined convergence time, independent of initial conditions, which is crucial for stable operation in dynamic environments.
  • Adaptive Super-Twisting Terminal Sliding Mode Controller (ASTW-TSMC): This controller combines the robustness of sliding mode control with the finite-time convergence of terminal sliding mode control. The "super-twisting" aspect significantly reduces chattering, a common issue in traditional sliding mode controllers, while adaptive laws further enhance parameter estimation and prevent overestimation of control gains. This combination allows for precise trajectory tracking and disturbance rejection.

Datasets

Not discussed in the paper. The study focuses on the design and validation of the control system through field tests.

Key Insights and Ideas

  • Disturbance Compensation is Paramount: The paper strongly emphasizes that effective underwater inspection in hydropower dams is impossible without robust real-time compensation for complex and dynamic hydrodynamic forces.
  • Bridging the Gap Between Theory and Practice: The ASTW-TSMC and fixed-time disturbance observer are not just theoretical constructs; their successful integration and validation in a real-world, challenging environment like Baihetan Hydropower Station demonstrate their practical efficacy.
  • Finite-Time Convergence is Key: Moving beyond asymptotic convergence, the use of terminal sliding mode control and fixed-time observers ensures that the robot reaches its desired state (e.g., position, depth) in a finite, predictable amount of time, which is critical for mission efficiency and safety.
  • Modularity for Reliability: The modular software design is crucial for managing the complexity of the system, ensuring real-time performance, and facilitating easier maintenance and upgrades.

Key Results

Field tests conducted at the Baihetan Hydropower Station demonstrated the system's effectiveness:

  • High Precision Control: The system achieved standard deviations for multi-degree-of-freedom automatic control below 0.5 and for hovering control below 0.1.
  • Specific Performance Metrics:
    • Depth-holding precision: standard deviation $\sigma = 0.034$ m.
  • Altitude-holding precision: standard deviation $\sigma = 0.148$ m.
  • Heading-lock precision: standard deviation $\sigma = 0.441^\circ$.
  • Station-keeping precision: 3D position deviation $\sigma = 0.07$ m.
  • Velocity regulation precision: standard deviation $\sigma = 0.011$ m/s.
  • Distance-holding precision: standard deviation $\sigma = 0.023$ m.
  • Robustness: The system demonstrated strong robustness against complex hydrodynamic disturbances, enabling stable and precise near-wall cruising, station-keeping, and autonomous control in intense turbulence and low-visibility conditions.

Limitations and Future Work

  • Limitations: While the paper highlights the system's success, the inherent complexity of real-world underwater environments means that continuous adaptation and refinement are always necessary. The paper doesn't explicitly detail limitations encountered during the field tests, but the need for future work implies areas for improvement.
  • Future Work:
    • Optimization of Control Algorithms: Further refinement to improve adaptability to a wider range of flow velocities and underwater terrains, incorporating real-time learning for dynamic hydraulic conditions.
  • System Miniaturization and Autonomy Enhancement: Developing compact, intelligent systems with integrated computer vision and deep learning for unmanned inspections, reducing reliance on surface post-processing.
  • Multi-Robot Collaboration and Swarm Intelligence: Establishing standardized protocols for multi-robot systems, including dynamic task allocation, collision avoidance, and robust swarm control for GPS-denied environments using acoustic positioning and SLAM.
  • Multi-Scenario Validation: Conducting comparative field trials against established benchmarks in various conditions, with initial results expected from the Three Gorges Dam deployment.

Summary updated

Abstract

As critical infrastructure, hydropower dams require efficient and accurate detection of underwater structural surface defects to ensure their safety. This paper presents the design and implementation of a robotic control system specifically developed for underwater dam inspection in hydropower stations, aiming to enhance the robot’s operational capability under harsh hydraulic conditions. The study includes the hardware design of the control system and the development of a surface human–machine interface unit. At the software level, a modular architecture is adopted to ensure real-time performance and reliability. The solution employs a hierarchical architecture comprising hardware sensing, real-time interaction protocols, and an adaptive controller, and the integrated algorithm combining a fixed-time disturbance observer with adaptive super-twisting controller compensates for complex hydrodynamic forces. To validate the system’s effectiveness, field tests were conducted at the Baihetan Hydropower Station. Experimental results demonstrate that the proposed control system enables stable and precise dam inspection, with standard deviations of multi-degree-of-freedom automatic control below 0.5 and hovering control below 0.1. These findings confirm the system’s feasibility and superiority in performing high-precision, high-stability inspection tasks in complex underwater environments of real hydropower dams. The developed system provides reliable technical support for intelligent underwater dam inspection and holds significant practical value for improving the safety and maintenance of major hydraulic infrastructure.
BibTeX
@article{zhao2025design,
  author = {Bing Zhao and Shuo Li and Xiangbin Wang and Mingyu Yang and Xin‐Yao Yu and Zhaoxu Meng and Gang Wan},
  title = {{Design of Control System for Underwater Inspection Robot in Hydropower Dam Structures}},
  journal = {Journal of Marine Science and Engineering},
  year = {2025},
  doi = {10.3390/jmse13091656},
}
Figure