Design of a Taiji-like Dual-band Microstrip Patch Antenna Loaded with Bagua Parasitic Patch

Shike Wang, Dan Xia, Lianrong Lv, Juan Qin, Meng Wang, Mengdan Chen, Biao Wang, Lei LiJournal of Physics Conference Series 2023 · DOI

Abstract

This study proposes a Taiji-shaped microstrip patch antenna without affecting its size and design complexity. The radiation patch adopts a Taiji-like shape design, and the traditional Chinese Bagua-shaped parasitic element is loaded on the periphery of the radiation patch on the surface of the dielectric substrate to optimize the impedance matching further and improve the gain. The software HFSS15.0 is used to simulate the antenna and compare the results. The results show that the antenna achieves dual-band characteristics at 2.45GHz and 5.04GHz, has an impedance bandwidth of 110MHz and 250MHz, and has a positive gain of 7.13dB. The proposed antenna is suitable for the field of wireless communication.

Introduction

Microstrip patch antennas (MPAs) are essential components in modern wireless communication due to their low profile, ease of fabrication, and cost-effectiveness. However, traditional MPAs often face limitations such as low gain, narrow bandwidth, and single-band operation. As demand for multi-band devices (e.g., supporting both 2.45 GHz and 5 GHz Wi-Fi) grows, researchers are seeking ways to enhance antenna performance without increasing physical footprint or complexity. This paper investigates the use of complex, asymmetrical geometries—specifically the Taiji (yin-yang) and Bagua (eight trigrams) motifs—to address these challenges in a single-layer design.

Design Methodology

The antenna was designed and simulated using HFSS 15.0 on a Rogers RO4003 dielectric substrate. The design incorporates two primary geometric innovations:

  1. Taiji-like Radiating Patch: The central radiating element is shaped like a "Yin fish," while a complementary "Yang fish" serves as a parasitic patch. This parasitic element is excited by the electromagnetic field of the main patch, effectively increasing the radiation area.
  2. Bagua Parasitic Elements: Eight hexagrams, based on the Bagua map, surround the central structure. These act as additional resonators to fine-tune impedance matching.
  3. Coaxial Feed: A single-point coaxial feed is used, offset from the center to optimize performance.
3D structure of the proposed Taiji-Bagua antenna showing the substrate, ground, and parasitic elements.

The design process followed an iterative approach, evolving through four distinct stages to optimize resonance and gain, moving from a standard circular patch to the final combined Taiji-Bagua design.

Evolutionary design stages from a standard circular patch (a) to the final Taiji-Bagua configuration (d).

Key Insights and Results

The research demonstrates that the inherent asymmetry of the Taiji shape naturally supports dual-band resonance. Furthermore, the Bagua hexagrams function as a distributed matching network. By adjusting the distance between these elements and the central patch, the researchers achieved superior impedance matching, minimizing return loss.

The final Taiji-Bagua configuration yielded the following results:

  • Dual-Band Resonance: Successful operation at 2.45 GHz and 5.04 GHz.
  • Enhanced Gain: A peak gain of 7.13 dB, significantly higher than standard circular patches (which typically hover around 2.1 dB).
  • Impedance Matching: A Voltage Standing Wave Ratio (VSWR) of 1.03 at 2.45 GHz, indicating near-perfect power transmission.
  • Bandwidth: Impedance bandwidths of 110 MHz and 250 MHz for the low and high bands, respectively, sufficient for standard wireless protocols.

Conclusion and Future Work

The study successfully shows that traditional geometric patterns can provide significant technical advantages in antenna design. While the simulation results are promising, the current work is limited by its lack of physical prototyping. Future research should focus on fabricating the antenna to validate these results in real-world conditions and exploring further optimizations of the Bagua hexagram dimensions to achieve even finer frequency control.

Summary updated

Abstract

Abstract This study proposes a Taiji-shaped microstrip patch antenna without affecting its size and design complexity. The radiation patch adopts a Taiji-like shape design, and the traditional Chinese Bagua-shaped parasitic element is loaded on the periphery of the radiation patch on the surface of the dielectric substrate to optimize the impedance matching further and improve the gain. The software HFSS15.0 is used to simulate the antenna and compare the results. The results show that the antenna achieves dual-band characteristics at 2.45GHz and 5.04GHz, has an impedance bandwidth of 110MHz and 250MHz, and has a positive gain of 7.13dB. The proposed antenna is suitable for the field of wireless communication.
BibTeX
@article{wang2023design,
  author = {Shike Wang and Dan Xia and Lianrong Lv and Juan Qin and Meng Wang and Mengdan Chen and Biao Wang and Lei Li},
  title = {{Design of a Taiji-like Dual-band Microstrip Patch Antenna Loaded with Bagua Parasitic Patch}},
  journal = {Journal of Physics Conference Series},
  year = {2023},
  doi = {10.1088/1742-6596/2469/1/012005},
}
Figure