Abstract
Motion control of the human hand is the most complex part of the human body. It has always been a challenge for a good balance between the cost, weight, responding speed, grasping force, finger extension, and dexterity of prosthetic hand. To solve these issues, a 3D-printed cable driven humanoid hand based on bidirectional elastomeric passive transmission (BEPT) is designed in this paper. A semi-static model of BEPT is investigated based on energy conservation law to analyze the mechanical properties of BEPT and a dynamical simulation of finger grasping is conducted. For a good imitation of human hand and an excellent grasping performance, specific BEPT is selected according to human finger grasping experiments. The advantage of BEPT based humanoid hand is that a good balance between the price and performance of the humanoid hand is achieved. Experiments proved that the designed prosthetic hand’s single fingertip force can reach 33 N and the fastest fingertip grasping speed realized 0.6 s/180°. It also has a good force compliance effect with only 430g’s weight. It can not only grab fragile objects like raw eggs and paper cup, but also achieve strong grasping force to damage metal cans. This humanoid hand has considerable application prospects in artificial prosthesis, human-computer interaction, and robot operation.
Introduction
The field of prosthetic hands currently faces a significant "performance-price gap." High-end robotic hands, such as the iLimb or Bebionic, offer exceptional dexterity and strength but come with price tags ranging from $11,000 to $18,000. These costs are prohibitive for the majority of the global population with limb disabilities. Conversely, affordable alternatives often suffer from being overweight, slow, or lacking the mechanical compliance necessary to adapt to various object shapes. The core engineering challenge lies in balancing cost, weight, speed, and force. Most existing designs utilize fixed gear ratios, forcing a compromise between speed (low ratio) and strength (high ratio). This research introduces a novel transmission system that passively adjusts its effective gear ratio based on encountered resistance.
Methodology: The BEPT Mechanism
The researchers developed the Bidirectional Elastomeric Passive Transmission (BEPT) to bridge the performance gap. This mechanism allows the hand to automatically transition between high-speed movement and high-force grasping without complex electronic sensors.
As shown in the figure above, the transmission consists of a flexion wheel equipped with a "flexible fence" made of elastic resin and an extension wheel. When the finger moves freely, the transmission radius remains large, facilitating high-speed motion. As the finger encounters an object and resistance increases, the flexible fence compresses. This compression reduces the effective radius of the wheel, effectively "shifting gears" to a lower ratio that provides significantly higher torque for grasping.
To further mimic the human hand, the team employed a heterogeneous design. Recognizing that human fingers vary in strength, they calibrated the BEPT configurations differently across the hand. The thumb, index, and middle fingers were optimized for maximum grip strength, while the ring and little fingers were tuned for auxiliary grasping support. The entire assembly is fabricated using Digital Light Processing (DLP) 3D printing, keeping material costs under $50.
Key Insights: Passive Adaptation and Compliance
A critical finding of the study is the existence of an "inflection point" in the transmission. By adjusting the number and stiffness of the flexible fences, engineers can precisely tune when the hand shifts from "speed mode" to "power mode."
Because the transmission is elastomeric, it provides inherent mechanical compliance. This allows the hand to "feel" and adapt to an object's geometry. This physical feedback loop enables the hand to perform delicate tasks, such as picking up a raw egg, without the need for expensive force sensors. Furthermore, simulations demonstrated that a heterogeneous finger design is superior to a homogeneous one for maintaining balance during complex grasps.
Results and Performance
The prototype achieved benchmarks that rival commercial units costing orders of magnitude more:
- Strength: A single fingertip can exert a force of 33 N.
- Speed: The hand can achieve full 180° flexion in just 0.6 seconds.
- Weight: At 430g, the device is comparable to the weight of a natural adult male hand.
- Dexterity: In GRASP motion spectrum tests, the hand successfully executed 14 out of 15 common human grasping modes.
In qualitative testing, the hand demonstrated its versatility by holding fragile paper cups and raw eggs without damage, while also possessing the power to crush metal cans and open tight thermos lids.
Limitations and Future Work
While the BEPT mechanism represents a breakthrough for low-cost prosthetics, several challenges remain. The current under-actuated scheme does not fully decouple the degrees of freedom (DOF) in the fingers, limiting extremely fine motor tasks like playing a musical instrument. Additionally, the design currently lacks adduction/abduction (spreading the fingers), which is necessary for tasks like using scissors. Future research will also focus on long-term material fatigue testing of the elastic components to ensure durability over thousands of cycles. Despite these limitations, this research provides a compelling blueprint for high-performance, accessible prosthetic technology.
Summary updated