Abstract
In order to improve the electrical and frequency characteristics of SiGe heterojunction bipolar transistors (HBTs), a novel structure of SOI SiGe heterojunction bipolar transistor is designed in this work. Compared with traditional SOI SiGe HBT, the proposed device structure has smaller window widths of emitter and collector areas. Under the act of additional uniaxial stress induced by $Si_{0.85}Ge_{0.15}$, all the collector region, base region and emitter region are strained, which is beneficial to improve the performance of SiGe HBTs. Employing the SILVACOⓇ TCAD tools, the numerical simulation results show that the maximum current gain $\beta_{max}$ and the Early voltage $V_A$ are achieved for 1062 and 186 V, respectively. The peak cutoff frequency $f_T$ is 419 GHz when the Ge component in the base is configured to be a trapezoidal distribution, representing a 52.9% improvement over conventional SOI SiGe HBTs.
Introduction
As wireless communication pushes into higher frequency bands, such as 5G/6G and terahertz imaging, the transistors powering these circuits must become significantly faster. While Silicon-Germanium (SiGe) Hetero-Junction Bipolar Transistors (HBTs) are a staple for high-frequency applications due to their compatibility with standard silicon manufacturing, they face a "speed limit" dictated by carrier transit times. Traditional methods to improve speed—like reducing device dimensions or using virtual substrates—often run into issues like excessive self-heating or poor process control. This research addresses the challenge of boosting the cutoff frequency ($f_T$) and current gain without sacrificing thermal stability or electrical reliability.
Device Architecture and Methodology
The researchers proposed a novel SOI SiGe HBT architecture utilizing Silicon-on-Insulator (SOI) technology combined with sophisticated "strain engineering." The design was validated using industry-standard SILVACO TCAD tools, specifically the ATHENA module for fabrication process simulation and the ATLAS module for 2D device electrical analysis.
Key Innovations: * Strain Engineering: The introduction of "embedded" $Si_{1-y}Ge_y$ (15% Ge) into the collector region creates uniaxial compressive stress. This increases the velocity of electrons passing vertically through the collector, reducing delay time. * SOI Substrate: A 200 nm Silicon substrate with a 100 nm Buried Oxide (BOX) layer is used to mitigate self-heating effects. * Optimized Dimensions: The structure features an emitter window width of 120 nm and a collector window width of 400 nm, smaller than conventional designs.
Performance Analysis and Ge Profile Optimization
A critical aspect of the study was comparing three different Germanium distributions in the base region: Box, Triangle, and Trapezoid. While the "Box" profile yields the highest maximum current gain ($\beta_{max} = 2415$), it does not provide the best frequency response.
The simulations revealed that the Trapezoidal profile provides the optimal balance for high-frequency applications. It achieves a high current gain of 1062 while reaching a superior peak cutoff frequency ($f_T$) of 419 GHz. This represents a 52.9% improvement over the 197 GHz seen in traditional SOI SiGe HBTs without strain. Furthermore, the Early voltage ($V_A$) was measured at 186 V, indicating excellent output characteristics and minimal base-width modulation. The product of gain and Early voltage ($\beta \times V_A$) reached $1.975 \times 10^5 \text{ V}$, a high benchmark for analog performance.
Conclusion
This research demonstrates that introducing uniaxial stress into the collector is a powerful lever for boosting $f_T$ in SiGe HBTs. By combining this with a trapezoidal Ge profile in the base and an SOI substrate, the proposed architecture achieves terahertz-range performance potential. While the study is numerical, it highlights a clear path for future commercial terahertz Si/SiGe BiCMOS integration. Future work involving 3D thermal simulations and experimental fabrication will be essential to realize these gains in practical hardware.
Summary updated