Design and performance of an acquisition and control system for a positron camera with novel detectors

J Richard N Symonds-Tayler, Andrew J. Reader, M. A. Flower, Viva Austin, Dimitris Visvikis, R.j. OttIEEE Transactions on Nuclear Science 1997 · DOI

Abstract

A Sun-based data acquisition and control (DAQ) system has been designed for PETRRA, a whole-body positron camera using novel large-area detectors. The DAQ system uses a high-speed digital I/O card (S16D) installed on the SBus of a SPARC10 and a specially-designed Positron Camera Interface (PCI), which also controls the gantry and horizontal couch motion. Data in the form of different types of B-byte packets are acquired in list mode. Tests with a signal generator show that the DAQ system should be able to accommodate coincidence count-rates up to 100 kcps. The predicted count loss due to the DAQ system is /spl sim/13% at this count rate, provided asynchronous-read based software is used. The list-mode data acquisition system designed for PETRRA could be adapted for other 3D PET cameras with similar data rates, including dual-headed gamma cameras operating in coincidence mode.
BibTeX
@article{symondstayler1997design,
  author = {J Richard N Symonds-Tayler and Andrew J. Reader and M. A. Flower and Viva Austin and Dimitris Visvikis and R.J. Ott},
  title = {{Design and performance of an acquisition and control system for a positron camera with novel detectors}},
  journal = {IEEE Transactions on Nuclear Science},
  year = {1997},
  doi = {10.1109/23.632713},
}

Loading related content...

Figure