Abstract
In this paper, through analyzing the physical characteristics and function of the pneumatic switch, and through the simulation of drawing technology, the assembly module was designed based on PLC control system and I/O module. And its reliability has been proved by the experiment. The system obtained very good effects in actual productions.
Introduction
In the landscape of modern manufacturing, particularly within China’s rapidly evolving industrial economy, the shift from labor-intensive processes to automation is a necessity driven by a tightening labor market. A specific bottleneck exists in the production of pneumatic switches: the manual assembly of functional parts, including cylindrical pins, plastic shells, and spring stoppers. Manual assembly is slow and prone to inconsistency.
The challenge lies in designing a system that can handle these small, delicate components across multiple stages—feeding, positioning, hot-melting, and final assembly—while maintaining the "hard" real-time requirements of an industrial production line.
System Design and Methodology
The researchers designed a multi-station assembly system centered around a Mitsubishi FX 3u-64MT PLC. The system architecture is a hybrid of pneumatic power and electronic precision.
Mechanical Structure and Workflow
A five-station rotary table serves as the heart of the system. It uses a stepping motor drive for precise 90-degree indexing, ensuring that components are perfectly aligned at each workstation. The process is fully synchronized across five stations:
- Feeding the plastic shell.
- Inserting the spring stopper.
- Hot-melt compacting.
- Charging the cylindrical pin.
- Discharging the finished component.
Control Logic and Pneumatics
The system employs 14 separate pneumatic circuits. These handle tasks ranging from "pick-and-place" via manipulators to the "hot melt" compacting of components. The PLC manages a complex I/O map (X1–X37 for inputs; Y0–Y17 for outputs). Every cylinder is equipped with position sensors at its limits, creating a closed-loop feedback system. This ensures the rotary table only advances once all five stations have confirmed task completion.
Key Insights
- Hard Real-Time Control: The use of a PLC provides ruggedization and guaranteed response times superior to standard microcontrollers for industrial specialty equipment.
- Parallel Processing: The rotary table allows five different assembly processes to occur simultaneously, which is the key to the system's high efficiency.
- Sensor-Driven Reliability: By installing sensors at the limiting positions of all 14 cylinders, the PLC maintains constant awareness of the machine state, preventing mechanical collisions or sequence errors.
Results and Conclusion
The system transitioned from a theoretical design to a functional prototype and eventually into actual production for a large-scale switch manufacturer. Experimental testing proved the system's reliability in a factory environment. The integration of 14 pneumatic circuits and the stepping-drive rotary table achieved the necessary precision for assembling small functional switch parts that were previously handled by hand. The authors report a dramatic reduction in manual labor demand and a significant increase in overall productivity.
Summary updated