Abstract
Assistive free-flying robots are a promising platform for supporting and working alongside astronauts in carrying out tasks that require interaction with the environment. However, current free-flying robot platforms are limited by existing manipulation technologies in being able to grasp and manipulate surrounding objects. Instead, gecko-inspired adhesives offer many advantages for an alternate grasping and manipulation paradigm for use in assistive free-flyer applications. In this work, we present the design of a gecko-inspired adhesive gripper for performing perching and grasping maneuvers for the Astrobee robot, a free-flying robot currently operating on-board the International Space Station. We present software and hardware integration details for the gripper units that were launched to the International Space Station in 2019 for in-flight experiments with Astrobee. Finally, we present preliminary results for on-ground experiments conducted with the gripper and Astrobee on a free-floating spacecraft test bed.
Introduction
In the microgravity environment of the International Space Station (ISS), maintaining position and manipulating objects presents unique challenges. Current assistive free-flyers, such as NASA’s Astrobee, typically rely on traditional robotic grippers that utilize force closure (pinching) or form closure (hooking onto specific features like handrails). These methods are limited by the requirement for specific geometries or parallel surfaces. To address these limitations, researchers from Stanford and NASA have developed a gecko-inspired adhesive gripper that enables "light-touch" attachment to a wide variety of flat surfaces without the need for squeezing or imparting significant momentum to the target.
Gripper Design and Mechanism
The core of the gripper technology is synthetic gecko-inspired adhesive. These materials utilize microscopic wedge-shaped structures to maximize contact area and leverage van der Waals forces for adhesion.
The gripper is designed as a drop-in replacement for Astrobee’s standard perching arm. It features a pair of opposed adhesive tiles. The adhesion is directional; it is activated when a shear force is applied and can be released with minimal force by applying a peeling moment. This directional control is critical in space to prevent the robot from accidentally pushing away a target during departure.
As shown in the mechanism diagram, a "load tendon" pulls the tiles toward each other to engage the adhesive (c), while "release tendons" lift the edges of the tiles to peel them away from the surface (d). This system is actuated by servos and high-strength Spectra tendons. To ensure the tiles conform to surfaces despite slight misalignments, the gripper includes a wrist with a ball joint providing 10 degrees of rotational freedom.
System Integration
The gripper was engineered for seamless integration with the Astrobee platform. It utilizes the same power bus and RS-485 data lines as the original arm. Control is managed by a Teensy 3.2 microcontroller. A key feature for autonomous operation is the inclusion of a Time-of-Flight (ToF) laser sensor. This sensor estimates the distance to the target surface and can "auto-trigger" the grasp when the robot is within 40mm, effectively compensating for communication latency between the robot and ground control.
Experimental Results
The development process included rigorous flight certification tests, including 12G vibration loads, electromagnetic interference (EMI) checks, and thermal testing to meet NASA safety standards. Two flight-qualified units were successfully launched to the ISS in July 2019.
Quantitative evaluation on a ground-based 3-DoF granite table facility demonstrated the gripper's efficacy. The flight units achieved a mean pull-off force of 10.4N to 11.2N on clean acrylic surfaces. While the theoretical maximum for the adhesive area is approximately 20N, these results are more than sufficient to secure the 10kg Astrobee robot in a microgravity environment. Furthermore, the adhesive requires zero power to maintain its grip once set, offering significant energy savings for long-term perching.
Conclusion and Future Work
The gecko-inspired gripper represents a significant advancement in free-flyer manipulation, providing a versatile, low-power solution for perching on smooth surfaces. While the current hardware is sensitive to surface roughness and cleanliness, it opens new possibilities for autonomous robot assistance on the ISS. Future work will focus on transitioning from manual astronaut-guided tests to fully autonomous perching maneuvers and implementing closed-loop control using real-time ToF feedback to optimize approach dynamics.
Summary updated