Abstract
Nanoantennas are critical elements of nanoscale wireless communication technologies with potential to overcome some of the limitations of on-chip interconnects. In this paper, we model the optical response of graphene-based nanoantennas (GNAs) using an equivalent resistive-inductive-capacitive (RLC) circuit by incorporating plasmonic effects that are present in graphene at terahertz (THz) frequencies. The equivalent circuit model is used to estimate the resonance characteristics of the nanoantenna, thereby facilitating geometry and material optimization. Three GNA structures are considered, namely bowtie, circular, and rectangular dimers with vacuum and silicon dioxide dielectric environment. We characterize the radiation efficiency, the Purcell factor, the quality factor, and the resonant frequency of various antennas with respect to the physical properties of the surrounding dielectric media and the graphene sheet. The GNAs are designed for a resonant frequency in the range of 10 - 25 THz with field enhancements around $10^4 - 10^5$ and radiation efficiency ~5 - 16%. The circuit model is validated against finite-difference time-domain (FDTD) simulations, and excellent match between the model and numerical results is demonstrated in the THz regime.
Introduction
As high-performance computing scales, traditional metal on-chip interconnects (wires) are becoming a bottleneck due to latency and power consumption. Wireless THz communication offers a high-bandwidth alternative, but it requires efficient "optical" nanoantennas (ONAs) to convert localized energy into free-space waves. While gold and silver are standard for nanoantennas, they lack tunability and suffer from high losses at THz frequencies. Graphene is a promising alternative because its conductivity can be dynamically tuned via electrostatic gating.
Modeling Graphene Nanoantennas
Designing these antennas usually requires Finite-Difference Time-Domain (FDTD) simulations, which are computationally intensive. This research presents a physics-based approach to modeling GNAs using equivalent circuit theory, translating complex electromagnetic interactions into a resistive-inductive-capacitive (RLC) framework.
The authors developed an equivalent RLC circuit model for three dimer geometries: bowtie, circular, and rectangular patches. Key components of their method include:
- Lumped Element Mapping: Physical equations represent antenna properties as circuit elements. For example, the inertia of electrons in graphene is modeled as kinetic inductance ($L_K$), which dominates over traditional Faraday inductance at these scales.
- Loss Modeling: The model accounts for both standard ohmic resistance and spreading resistance, the latter of which is particularly significant at the sharp tips of bowtie antennas.
- Kubo Formalism: Used to calculate the frequency-dependent conductivity of graphene, incorporating parameters like electrochemical potential ($\mu_{cp}$) and carrier scattering rates.
Key Insights and Results
Unlike macroscopic antennas, the resonant behavior of GNAs is primarily driven by the kinetic inductance of graphene's charge carriers, allowing the antennas to be much smaller than the wavelength of light they interact with. By adjusting the electrochemical potential (Fermi level) of the graphene, the resonant frequency can be shifted, scaling with $\sqrt{\mu_{cp}}$.
The designed GNAs operate in the 10–25 THz range. The circuit model revealed a significant "pointy" trade-off: bowtie antennas provide the highest field enhancement ($10^4$–$10^5$) due to charge accumulation at their sharp tips, but this geometry increases spreading resistance, leading to lower radiation efficiency (~5–6%) compared to circular dimers (~16%).
Furthermore, the antennas achieved Purcell factors greater than $10^3$, indicating highly efficient light-matter interaction. The equivalent RLC model showed an excellent match with FDTD results for resonant frequency and captured main resonance peaks for efficiency and power with errors under 35%—a reasonable trade-off for the massive gain in simulation speed.
Conclusion and Future Work
While the RLC model is excellent at capturing primary resonance peaks, it does not yet accurately model higher-order modes (side lobes). Future work will explore quantum limits for gaps smaller than 5 nm, where quantum tunneling between antenna arms would occur, and focus on how these GNAs interface with plasmonic waveguides for practical network-on-chip applications.
Summary updated