Design and Analysis of a Sensor System for Cutting Force Measurement in Machining Processes

Qiaokang Liang, Dan Zhang, Gianmarc Coppola, Jianxu Mao, Wei Sun, Yaonan Wang, YunJian Ge2016 · DOI

TL;DR

This paper introduces a novel six-component sensor system designed to simultaneously measure cutting forces (Fx, Fy, Fz) and moments (Mx, My, Mz) in machining processes. By employing a simulation-driven optimization approach and a unique monolithic elastic element, the system achieves high accuracy and minimizes coupling errors, paving the way for more robust in-process monitoring and control in manufacturing.

What Problem Does This Paper Address?

Modern manufacturing industries are under immense pressure to improve product quality, boost productivity, and reduce costs. A critical aspect of achieving these goals is effective monitoring and control of the machining process. Cutting forces are a direct indicator of the tool's condition and the machining operation's health. However, existing sensor systems often struggle to provide comprehensive, accurate, and simultaneous measurements of all six force and moment components (3 forces and 3 moments). Many systems are indirect, relying on estimations that can be computationally intensive and unsuitable for complex multi-axis operations. Direct measurement systems, while more accurate, can be limited by workpiece size, bandwidth, mounting constraints, and susceptibility to harsh environments. This paper aims to bridge this gap by developing a compact, high-performance six-component sensor that can reliably measure these critical parameters simultaneously.

Methods

The core of the proposed sensor system is a monolithic elastic element (EE) with a unique design featuring double circular diaphragms, a hollow cylinder, and cross-shaped lamellas. This EE is instrumented with 24 strain gauges strategically placed to capture deformations caused by applied forces and moments.

The design process involved a Simulation-Driven Optimization (SDO) approach using ANSYS. This method allowed the researchers to explore a wide range of geometric parameters for the EE (e.g., diaphragm thickness, lamella length) and their impact on performance metrics like maximum deformation, minimum strain, maximum stress, and natural frequency. This iterative simulation and optimization process helped identify the optimal structural parameters to achieve a balance between sensitivity, stiffness, isotropy, and minimal coupling.

The sensor's electrical system utilizes Wheatstone bridge configurations for each set of strain gauges, enabling independent detection of the six force and moment components. The paper also details the theoretical analysis of strain and stress within the EE under various load conditions, providing a foundation for understanding the sensor's behavior.

Datasets

Not discussed in the paper. The paper focuses on the design, simulation, and experimental validation of a novel sensor system, rather than training on or evaluating against pre-existing datasets.

Key Insights and Ideas

  • Monolithic Elastic Element Design: The innovative design of the EE with double diaphragms and cross-shaped lamellas is crucial for simultaneously measuring forces and moments with reduced coupling. This structural approach is a key differentiator.
  • Simulation-Driven Optimization (SDO) for Sensor Design: Using SDO with FEA is a powerful methodology for optimizing complex mechanical systems like multi-component force sensors, where achieving multiple performance objectives (sensitivity, stiffness, linearity, low coupling) simultaneously is challenging.
  • Minimizing Coupling: A significant challenge in multi-component sensors is the cross-talk between different force and moment measurements. The paper's design and optimization efforts specifically target minimizing this coupling, which is essential for accurate in-process monitoring.
  • Integrated System Approach: The sensor is not just the EE but an integrated system including the EE, strain gauges, measuring bridges, and an electric circuit, all designed to work cohesively.

Key Results

  • The prototype sensor system has a compact size of 80 mm × 42 mm.
  • The measurement range is set to 0–250 N for cutting force Fz, ±200 N for shear forces (Fx, Fy), ±10 Nm for moments around the normal axis (Mx, My), and ±8 Nm for moments around the shear axis (Mz).
  • Calibration experiments demonstrated good linearity and minimized coupling errors.
  • The system achieved a maximum coupling error of 1.94% and a maximum nonlinearity error of 1.87% for the measured components.
  • The sensor exhibits a primary response frequency of 744.3 Hz, indicating good dynamic capabilities.
  • Table 7 shows a performance comparison with other sensors, where the proposed approach achieves a maximum relative error of <5% with a 6-axis capability, outperforming many other systems in terms of axes and error margins.

Limitations and Future Work

  • Coupling and Attachment Error: While significantly reduced, the paper acknowledges that slight coupling still exists due to the monolithic EE structure and the attachment error of the strain gauges.
  • Dynamic Measurement: The current paper focuses on static cutting F/M measurement. The authors state that the sensor system is now being applied to measure cutting loads in machining processes, and reliable results are expected. Future work will focus on dynamic cutting F/M measurement and actual cutting experiments.
  • Temperature Drift: The paper mentions that the electrical circuits are characterized with intrinsic compensation for temperature drift, but the extent of this compensation and its performance under extreme temperature variations are not detailed.

Summary updated

BibTeX
@misc{liang2016design,
  author = {Qiaokang Liang and Dan Zhang and Gianmarc Coppola and Jianxu Mao and Wei Sun and Yaonan Wang and YunJian Ge},
  title = {{Design and Analysis of a Sensor System for Cutting Force Measurement in Machining Processes}},
  year = {2016},
  doi = {10.3390/s16010070},
}

Loading related content...

Figure