Design and Analysis of a Novel Bionic Tensegrity Robotic Fish with a Continuum Body

Di Chen, Bo Wang, Yan Xiong, Jie Zhang, Ru Tong, Yan Meng, Junzhi YuBiomimetics 2024 · DOI

TL;DR

This paper introduces a novel bionic robotic fish that utilizes a tensegrity structure for its continuum body, enabling dynamic stiffness variation. This design mimics the agile and efficient swimming of biological fish, achieving impressive speeds and maneuverability, particularly in steering.

What Problem Does This Paper Address?

Biological fish are masters of aquatic locomotion, exhibiting remarkable adaptability and efficiency through their flexible bodies and sophisticated propulsion mechanisms. Replicating this in robotic fish has been a significant challenge. Traditional multi-jointed robots are often complex, costly, and inefficient. While continuum robots offer a more bio-inspired approach, achieving variable stiffness—a key feature for optimal performance across different conditions—has proven difficult without adding significant complexity. This paper aims to bridge this gap by developing a continuum robotic fish with an integrated, easily controllable variable stiffness mechanism.

Methods

The core innovation lies in the use of a tensegrity structure to form the robotic fish's body. Tensegrity systems, composed of rigid elements connected by pre-tensioned elastic cables, inherently offer compliance and the potential for stiffness modulation. The researchers designed a modular tensegrity unit that can be serially connected to create a continuous, flexible body.

Key methodological aspects include:

  • Modular Tensegrity Design: A unit consisting of rigid rods and elastic springs was developed, allowing for scalability and a streamlined fish-like profile.
  • Wire-Driven Actuation: Two sets of wires, controlled by servo motors, are used to manipulate the tensegrity structure. By independently adjusting wire lengths, the robot can achieve bending motions for propulsion and steering.
  • Mathematical Modeling: A model was developed to analyze the bending characteristics of the tensegrity structure, correlating wire length variations with bending angles. This model helps predict and understand the robot's motion.
  • Stiffness Variation Mechanism: The researchers demonstrated that by synchronously contracting or extending the wires (i.e., ∆L₁ = ∆L₂), the overall body length changes, altering the pre-tensions in the elastic elements. This allows for online stiffness adjustment, a significant advantage over methods requiring physical component changes.
  • Prototype Development and Experimentation: A full robotic fish prototype was built, integrating the tensegrity body with a rigid head and a flexible tail. Extensive experiments were conducted to evaluate swimming velocity and steering performance under various control parameters (frequency, amplitude) and stiffness settings (body contraction length).

Datasets

Not discussed in the paper. The experiments were conducted in a controlled water tank environment.

Key Insights and Ideas

  • Tensegrity as a Bio-Inspired Stiffness Modulator: The paper convincingly demonstrates that tensegrity structures are not just for structural integrity but can be effectively leveraged for dynamic, online stiffness variation in robotic systems, mimicking biological adaptability.
  • Simplicity of Wire-Driven Stiffness Control: The ability to achieve stiffness variation simply by adjusting wire lengths via two servo motors is a significant engineering advantage, reducing complexity and cost compared to other variable stiffness mechanisms.
  • Stiffness-Body Length Coupling: The research highlights a crucial trade-off: changing stiffness also alters the body's effective length. This coupling influences both propulsion and maneuverability, requiring careful consideration in design and control.
  • Steering Performance Enhancement with Stiffness: Interestingly, while increased stiffness had a less pronounced effect on maximum swimming speed, it significantly improved turning radius and angular velocity, suggesting that optimized stiffness is critical for agile maneuvering.

Key Results

  • Maximum Swimming Velocity: The robotic fish achieved a maximum swimming velocity of 295 mm/s (0.84 body lengths per second, BL/s). This was observed with a body contraction length of ∆L = 10 mm at high frequencies and amplitudes.
  • Steering Performance: The robot demonstrated impressive maneuverability, achieving a minimum turning radius of 230 mm (0.68 BL) and a maximum angular velocity of 46.6°/s. These results were obtained with a contraction length of ∆L = 20 mm.
  • Influence of Stiffness on Velocity: Increasing body contraction length (and thus stiffness) from 0 mm to 10 mm generally increased swimming velocity. However, further increases to 20 mm showed diminishing returns on velocity, suggesting an optimal stiffness range for speed.
  • Influence of Stiffness on Steering: In contrast to velocity, increasing contraction length (stiffness) significantly improved steering performance, reducing the turning radius and increasing angular velocity.

Limitations and Future Work

  • Simplified Mathematical Model: The authors acknowledge that their mathematical model for bending analysis is simplified, particularly regarding the complex elasticity network of the tensegrity structure. Future work will focus on developing more accurate models that incorporate these elastic components to better guide design optimization.
  • Further Optimization of Stiffness Distribution: While the current design offers variable stiffness, the paper suggests further investigation into optimizing the stiffness distribution across different tensegrity modules for enhanced performance.
  • Bio-Inspired Modulation Strategies: The research plans to explore bio-inspired strategies for stiffness modification, moving beyond simple parameter adjustments to more sophisticated control methods.
  • Maneuverability Focus: The paper notes that maneuverability has been less considered in prior tensegrity robotic fish designs. This work contributes to addressing that, but further research into optimizing steering and other agile motions is warranted.

Summary updated

Abstract

Biological fish exhibit remarkable adaptability and exceptional swimming performance through their powerful and flexible bodies. Therefore, designing a continuum flexible body is significantly important for the development of a robotic fish. However, it is still challenging to replicate these functions of a biological body due to the limitations of actuation and material. In this paper, based on a tensegrity structure, we propose a bionic design scheme for a continuum robotic fish body with a property of stiffness variation. Its detailed structures and actuation principles are also presented. A mathematical model was established to analyze the bending characteristics of the tensegrity structure, which demonstrates the feasibility of mimicking the fish-like oscillation propulsion. Additionally, the stiffness variation mechanism is also exhibited experimentally to validate the effectiveness of the designed tensegrity fish body. Finally, a novel bionic robotic fish design scheme is proposed, integrating an electronic module-equipped fish head, a tensegrity body, and a flexible tail with a caudal fin. Subsequently, a prototype was developed. Extensive experiments were conducted to explore how control parameters and stiffness variation influence swimming velocity and turning performance. The obtained results reveal that the oscillation amplitude, frequency, and stiffness variation of the tensegrity robotic fish play crucial roles in swimming motions. With the stiffness variation, the developed tensegrity robotic fish achieves a maximum swimming velocity of 295 mm/s (0.84 body length per second, BL/s). Moreover, the bionic tensegrity robotic fish also performs a steering motion with a minimum turning radius of 230 mm (0.68 BL) and an angular velocity of 46.6°/s. The conducted studies will shed light on the novel design of a continuum robotic fish equipped with stiffness variation mechanisms.
BibTeX
@inproceedings{chen2024design,
  author = {Di Chen and Bo Wang and Yan Xiong and Jie Zhang and Ru Tong and Yan Meng and Junzhi Yu},
  title = {{Design and Analysis of a Novel Bionic Tensegrity Robotic Fish with a Continuum Body}},
  booktitle = {Biomimetics},
  year = {2024},
  doi = {10.3390/biomimetics9010019},
}
Figure