Design and Analysis of a Differential Waveguide Structure to Improve Magnetostrictive Linear Position Sensors

Yongjie Zhang, Weiwen Liu, Haibo Zhang, Jinfeng Yang, Hui ZhaoSensors 2011 · OpenReview

TL;DR

This paper introduces a novel "differential waveguide structure" for magnetostrictive linear position sensors (MLPS). By employing two opposing waveguides and receiving coils, the new design significantly enhances signal-to-noise ratio (SNR) and common-mode rejection ratio (CMRR), leading to improved accuracy and reduced susceptibility to electromagnetic interference (EMI).

What Problem Does This Paper Address?

Magnetostrictive linear position sensors (MLPS) are valued for their non-contact operation, high precision, reliability, and cost-effectiveness in industrial applications. However, a significant drawback of traditional MLPS is their susceptibility to electromagnetic interference (EMI). This interference can introduce random errors, particularly during high-speed time measurements, which are crucial for determining position. Improving the signal-to-noise ratio (SNR) is therefore a key challenge in MLPS design. Previous attempts have focused on controlling excitation periods or using multiple receiving coils, but this paper proposes a more robust structural modification.

Methods

The core innovation is the "differential waveguide structure." Instead of a single waveguide, the proposed MLPS utilizes two identical waveguides (termed "positive" and "negative") connected at one end. At the other end, two corresponding receiving coils are also arranged in a differential, head-to-tail configuration. This setup is designed to generate opposing signals from the two coils, which are then subtracted. The paper also presents a sensor model that incorporates the Wiedemann effect (generating torsional waves from magnetic fields) and the Villari effect (changes in magnetic permeability due to mechanical stress) to predict sensor performance. The model's predictions are then compared to experimental data.

Datasets

Not discussed in the paper. The experiments were conducted using custom-built MLPS prototypes and standard laboratory equipment.

Key Insights and Ideas

  • Differential Design for Noise Cancellation: The head-to-tail connection of the two receiving coils is the key to noise reduction. Common-mode noise (like EMI) affects both coils similarly and is largely canceled out when their signals are subtracted, while the desired signal (the torsional wave) is amplified.
  • Doubled Signal Intensity: Theoretically, the differential structure doubles the signal intensity compared to a single-mode waveguide, leading to a higher SNR.
  • Improved Accuracy and Stability: The enhanced SNR and CMRR directly translate to reduced measurement uncertainty and greater stability, especially in noisy industrial environments.
  • Temperature Performance Enhancement: The differential structure also shows improved temperature characteristics, with a smaller drift compared to traditional designs. This is attributed to the symmetrical thermal effects on the two waveguides.

Key Results

  • Accuracy Improvement: The new differential structure achieved an accuracy of ±0.1 mm, a significant improvement over the ±0.2 mm accuracy of the traditional structure.
  • Signal Intensity: Experimental results showed the signal amplitude with the differential waveguide structure was approximately twice that of the single-mode structure.
  • Signal Instability Reduction: The instability of the induction signal was reduced from 100 ns to 60 ns in the processing unit compared to traditional sensors.
  • Temperature Drift: The differential waveguide structure exhibited smaller temperature drift over a range of 20-60 °C.

Limitations and Future Work

  • Manufacturing Symmetry: The authors note that accuracy could be further improved if the differential structure were manufactured with better symmetry.
  • Theoretical Support: While experimental results are promising, the paper suggests that more essential theoretical support for the temperature characteristics of the differential structure MLPS will be expounded in a future study.
  • Model Accuracy: The sensor model's predictions showed a 30% difference from experimental data, attributed to energy loss during wave propagation. Further refinement of the model is implied.

Summary updated

BibTeX
@inproceedings{zhang2011design,
  author = {Yongjie Zhang and Weiwen Liu and Haibo Zhang and Jinfeng Yang and Hui Zhao},
  title = {{Design and Analysis of a Differential Waveguide Structure to Improve Magnetostrictive Linear Position Sensors}},
  booktitle = {Sensors},
  year = {2011},
  url = {https://openreview.net/forum?id=m9xpDG1YqB},
}
Figure